Imperial Mining Commences Crater Lake Scandium Project Drilling Program, Northeastern Québec

Imperial Mining Group Ltd. (“Imperial”) (TSXV: IPG) is pleased to announce that it has mobilized crews to commence diamond drilling activities on its Crater Lake scandium project, northeastern Québec (Figure 1).

The program calls for up to 2,500 m of diamond drilling to be completed on the TG Zone (TGZ) target (Figure 2). The diamond drill program will commence in early March and is expected to be completed by the end of April. Data from this definition drilling will be used for a 43-101 Inferred Resource calculation, which is expected to be delivered by the end of May or early June. The ultimate objective of this exploration work is to deliver a Preliminary Economic Assessment on the scandium resource towards the end of the year or early 2020.

The highest scandium grades obtained from the property were returned from a highly-magnetic pyroxenite horizon related to a 6-km diameter alkali intrusive Complex. Previous exploration programs over the pyroxenite target returned very high scandium grades in drilling of up to 167.8m grading 260 g/t Sc including 62.8 m grading 304 g/t Sc2O3 and including 27.6 m grading 351 g/t Sc2O3. In addition, previous drilling at the southern margin of the TGZ target returned a high-grade scandium intersection grading 506 g/t Sc2O3over 19.0m. Imperial’s summer prospecting and grab sampling program over the TGZ target area returned between 404 g/t and 1,540 g/t Sc2O3 in outcrop (see Press Release: October 30, 2018). These grades compare well with those reported from other scandium resources presently being explored in Australia and the United States. The magnetic anomaly related to this target measures 600 m in strike length by 200 m wide and represents a very attractive scandium target for drilling (Figure 3).

The drilling will be conducted along 100 m spaced sections with three (3) boreholes to be drilled per section (Figure 3) for a total of 15 holes. Forage Avataa-Rouillier of Kuujjuaq, Québec, is the contractor for the drill program. Samples collected from drilling will be submitted to Actlabs of Ancaster, Ontario for geochemical analysis upon completion of the program. A quality control program will be followed and certified standard and blank materials will be inserted at regular intervals throughout the sequence of samples. As well, duplicate samples will be also inserted.

“This diamond drilling program is the culmination of a strong team effort to understand the scandium resource potential of such a large exploration target,” said Peter Cashin, Imperial’s President & Chief Executive Officer. “We hope to start releasing results of the diamond drilling sometimes in April.  It is apparent, from our recent strategic marketing activities, particularly in the EU and UK, that the automotive and aerospace sectors will rapidly adopt scandium as a critical lightweight alloy agent once a long-term, sustainable supply has been identified. Imperial fully intends to be one of those principal supply sources.”

Scandium Markets and its Potential Applications in the Automotive Sector

Scandium acts as a grain-refiner and hardener of aluminum alloys. Aluminum-scandium alloys combine high strength, ductility, weldability, improved corrosion resistance and a lower density. The combination of all these properties makes aluminum-scandium alloys well-suited for the aerospace, automotive and defense industries. The broader adoption of scandium in the aluminum alloys sector has been constrained by the limited availability of scandium in western commercial markets from primary suppliers, China and Russia. The lack of an assured source of supply to provide material for additional applications has also limited market expansion. This has resulted in much higher prices for Sc compared to competing alloy materials, such as titanium, and has limited its broader industry adoption.

Imperial’s outreach activities in Stuttgart during the week of February 19th to 21st with German auto industry OEMs was very positive as the industry truly embraced the potential of a long-term, sustainable source of scandium as presented by our Crater Lake project. Efforts are now underway to solidify application R&D partnerships for programs that will address the auto industry’s requirements for lightweighting solutions for future EV and Internal Combustion Engine (ICE) platforms.

Generally, Imperial’s discussions and findings from the Conference have identified areas for broader scandium-aluminium adoption, which are:

Chassis Development – The general thinking is, aside from the mechanical qualities offered by Sc-Al, there is scope to change the design philosophy and in turn reduce the amount of Aluminium used per automobile. With EV, given the weight of the battery packs, this will not, we assume effect the balance/handling of the Auto, but certainly a consideration for the ICE/Hybrid Platform. Lightening of the chassis would extend EV range and improve fuel efficiency of combustion engine vehicles.
EV Battery Tray – The strength and weight saving characteristics of Sc naturally lend themselves to Battery Trays, but we believe Sc-Al offers an alternative solution regarding corrosion resistance and high ballistic protection afforded by the alloy.  NASA previously completed work with Sc-Al seeking a material that would remain inert in contact of rocket fuel plus had ballistic resistance qualities against micrometeorite impacts in space.  Our belief is these characteristics would play very well for Battery trays and offer a potential safety solution around the battery packs themselves while reducing weight.
Hydrogen Fuel Tanks – NASA has also found that Sc-Al for Hydrogen Fuel tank applications is an interesting area within the Automobile value chain. Hydrogen fuel cells will likely be the longer-term clean mobility solution as opposed to EV.  Hydrogen fuel tanks are complex items and for the moment are expensive with market studies stating that a tank can cost up to $30,000; from the research we have conducted Tank development is the one of the major inhibitors to fuel celled cars being more widely adopted.
Crash Structures – At the Conference we heard about Crash Structures in cars as being an area of interest and based on the discussions of last week, we agree there are several characteristics in Sc-Al which would lend itself well to Crash Structure applications.
Truck  & Auto Wheels – There is a call from fleet managers of trucking groups to strengthen and lighten truck wheels to reduce fuel costs through weight savings and to  improve road safety. The same consideration applies to automobiles.
* – 1 g/t Sc metal = 1.5338 g/t Sc oxide

In addition, Imperial recently launched an IR initiative with Investing News Network (INN) in an effort of broadening IPG’s investor profile and expanding its scandium sector outreach. Imperial’s INN profile will allow the Corporation to keep investors updated on its exploration project activities and provide a platform to educate investors as to the critical nature of the growing scandium markets in the automotive, aerospace, defense and alternative energy sectors. The INN profile can be accessed using the link:

Imperial Mining

The technical content in this press release was prepared, reviewed and certified by Pierre Guay, P. Geo., Imperial’s Vice-President, Exploration, a Geologist and Qualified Person as defined by NI43-101.

ABOUT IMPERIAL MINING GROUP LTD.

Imperial is a new Canadian mineral exploration and development company focused on advancing its copper-zinc, gold and technology metals properties in Québec. Imperial is publicly listed on the TSX Venture Exchange as “IPG” and is led by an experienced team of mineral exploration and development professionals with a strong track record of mineral deposit discovery in numerous metal commodities.

For further information please contact:

Peter J. Cashin
President and Chief Executive Officer
Tel: +1 (514) 360-0571
Email: info@imperialmgp.com
URL: www.imperialmgp.com

This press release may contain forward-looking statements relating to the Company’s operations or to its business environment. Such statements are based on the Company’s operations, estimates, forecasts, and projections, but are not guarantees of future performance and involve risks and uncertainties that are difficult to predict or control. Several factors could cause actual outcomes and results to differ materially from those expressed. These factors include those set forth in the corporate filings. Although any such forward-looking statements are based upon what management believes to be reasonable assumptions, the Company cannot guarantee that actual results will be consistent with these forward-looking statements. In addition, the Company disclaims any intention or obligation to update or revise any forward-looking statements, for any reason. We also do not commit in any way to guarantee that we will continue reporting on items or issues that arise. Investors are cautioned that this press release contains quoted historical exploration results. These are derived from filed assessment reports and compiled from governmental databases. The Company and a QP have not independently verified and make no representations as to the accuracy of historical exploration results: these results should not be relied upon. Selected highlight results may not be indicative of average grades.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Click here to connect with Imperial Mining Group Ltd. (TSXV: IPG) for an Investor Presentation.

Source: globenewswire.com