Preliminary Test Results Show Refrigerated Trailer Engine Performance Exceeds dynaCERT’s Expectations

dynaCERT Inc. (TSXV:DYA; OTC:DYFSF) (“dynaCERT” or the “Company”) is very pleased to report that, after months of testing on a stationary refrigerated trailer (Reefer) supplied by a national grocery chain, the fuel improvements have been exceptional. A second Reefer has been delivered to dynaCERT in order to duplicate the testing process for even further confirmation of the effectiveness of the dynaCERT HydraGEN™ technology.

The test protocol measured hourly results at different temperature set points of the refrigeration unit to benchmark the engine’s fuel consumption and emission results under various conditions. This was conducted over many weeks to verify results.

The HydraGEN™ unit was then connected to the engine’s air intake and the testing followed the same protocol as the benchmark testing and recorded improved fuel consumption and emission results.

While testing continues, current results show fuel consumption reductions exceeding 20% at selected different temperature set points and as high as 28% when the Reefer engine was operating at a steady state. The current test also shows results of similar reductions in emissions as attained in the PIT testing of HG1 units (see Press Release of September 21, 2017 “Milestone Exceeded by dynaCERT’s HydraGEN™ Technology: Initial PIT Group Test Results Show Emission Reductions – NOx Reduced by 46.1%.”).

Testing has begun on the second Reefer trailer to replicate these results.

These results point dynaCERT’s new HG2 unit to a potential vast market for not only Reefers but also Class 2-5 fixed-body delivery trucks, city buses and average trucks in the European, Asian and India market place. The company has made significant progress in the development of the HG2 unit, which is approximately 25% of the size of the HG1 unit, thereby allowing for a broader range of applications for diesel engines with displacements of up to 10 litres.

dynaCERT’s COO, Robert Maier, states, ”We believe that these fuel savings results are indicative for all diesel engines regardless of age or manufacturer.  The use of a HydraGEN™ unit on all diesel vehicles will certainly contribute to the goals of the Paris Accord to reduce greenhouse gases with climate-resilient development.”

In other related news, the dynaCERT proprietary electronic control unit, the smart compact ECU2, which was developed for the HydraGEN™ HG2 unit, has passed initial pre-screen FCC testing requirements and is expected to be released for production in the next few weeks. dynaCERT has just completed the expansion of our new assembly plant to accommodate the manufacturing of the HG2 units which are expected to be ready for delivery near the end of Q4, 2017.

About dynaCERT Inc. 
dynaCERT Inc. manufactures, distributes, and installs Carbon Emission Reduction Technology for use with internal combustion engines.  Our patent-pending technology creates hydrogen and oxygen on-demand through electrolysis and supplies these additives through the air intake to enhance combustion, resulting in lower carbon emissions and greater fuel efficiency.  Our technology is currently in use with on-road applications.  Website:  www.dynaCERT.com.

READER ADVISORY
Except for statements of historical fact, this news release contains certain “forward-looking information” within the meaning of applicable securities law. Forward-looking information is frequently characterized by words such as “plan”, “expect”, “project”, “intend”, “believe”, “anticipate”, “estimate” and other similar words, or statements that certain events or conditions “may” or “will” occur.  In particular, forward-looking information in this press release includes, but is not limited to: future issuances of shares, approval by the TSX Venture Exchange.  Although we believe that the expectations reflected in the forward-looking information are reasonable, there can be no assurance that such expectations will prove to be correct. We cannot guarantee future results, performance or achievements. Consequently, there is no representation that the actual results achieved will be the same, in whole or in part, as those set out in the forward-looking information.

Forward-looking information is based on the opinions and estimates of management at the date the statements are made, and are subject to a variety of risks and uncertainties and other factors that could cause actual events or results to differ materially from those anticipated in the forward-looking information.  Some of the risks and other factors that could cause the results to differ materially from those expressed in the forward-looking information include, but are not limited to: uncertainty as to whether our strategies and business plans will yield the expected benefits; availability and cost of capital; the ability to identify and develop and achieve commercial success for new products and technologies; the level of expenditures necessary to maintain and improve the quality of products and services; changes in technology and changes in laws and regulations; the uncertainty of the emerging hydrogen economy; including the hydrogen economy moving at a pace not anticipated; our ability to secure and maintain strategic relationships and distribution agreements; and the other risk factors disclosed under our profile on SEDAR at www.sedar.com.  Readers are cautioned that this list of risk factors should not be construed as exhaustive. 

The forward-looking information contained in this news release is expressly qualified by this cautionary statement. We undertake no duty to update any of the forward-looking information to conform such information to actual results or to changes in our expectations except as otherwise required by applicable securities legislation.  Readers are cautioned not to place undue reliance on forward-looking information.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of the release.

On Behalf of the Board

Murray James Payne, CEO
For more information, please contact:

Jim Payne, CEO & President
dynaCERT Inc.
#101 – 501 Alliance Avenue
Toronto, Ontario M6N 2J1
(416) 766-9691 x 2
jpayne@dynaCERT.com
Investor Relations
dynaCERT Inc.
Nancy Massicotte
(416) 766-9691 x 1
ir@dynaCERT.com
Click here to connect with dynaCERT Inc. (TSXV:DYA; OTC:DYFSF) to receive an Investor Presentation.

Source: globenewswire.com