Energizer Resources Confirms Specialty Graphite Foil Manufactured from Molo Graphite Concentrate

Battery Metals
OTCQX:ENZR

Energizer Resources Inc. (TSX:EGZ,OTCQX:ENZR,FWB:YE5) has received confirmation that an independent third party has successfully manufactured a graphite foil from the company’s Molo flake graphite concentrate. Initial test results indicate it has met all specifications and quality requirements for specialty graphite foil applications.

Energizer Resources Inc. (TSX:EGZ,OTCQX:ENZR,FWB:YE5) has received confirmation that an independent third party has successfully manufactured a graphite foil from the company’s Molo flake graphite concentrate. Initial test results indicate it has met all specifications and quality requirements for specialty graphite foil applications.
As quoted in the press release:

Independent advanced testing was performed by a leading European manufacturer of carbon-based products, who is recognized as a global leader in the use of natural flake graphite for the production of graphite foils for smartphones and tablets, gasket materials in automotive, petroleum, chemical and nuclear industries, and conductive plates in fuel cells and vanadium redox batteries. Energizer is a under a non-disclosure and confidentially agreement with this manufacturer.
The purpose of these tests being conducted was to ascertain the potential for Energizer’s Molo deposit to be an alternative and sustainable natural source of flake graphite concentrate for the purpose of supplying the expandable graphite and specialty graphite foil applications market.
Testing consisted of two separate 5 kilogram samples of +48 mesh (jumbo flake) Molo concentrate, grading 97% carbon, which was produced using a simple flotation process. It was then purified with standard methods to greater than 99.9% and then thermally expanded by the manufacturer and made into a foil.
Test results confirmed that the expansion volume of the Molo flake concentrate exceeded the current minimum performance standards of greater than 500 cc/g (less than 2g/l) required by this manufacturer for its specialty products, while detecting no known impurities. While Energizer has received only positive results to date from other end-users who have tested for expanded graphite applications, the testing procedures undertaken by this specific manufacture is understood to be one of the most advanced of any end-market producer and is regarded as having the most stringent product quality and testing standards in the industry.
Results also confirmed that the minimum flake size required by this manufacturer for expandable graphite applications is +48 mesh (jumbo flake) and must be free of specific impurities. As confirmed by the Company’s Feasibility Study dated February 6th, 2015 titled ‘Molo Feasibility Study’, 23.6% of the flake from the Molo deposit would qualify as +48 mesh (jumbo size) variety.
Expandable graphite (foils) is the fastest growing market for flake graphite and represents approximately 10% of the global consumption of natural graphite. Expandable graphite in its foil form is used as a heat sink and sealant for consumer electronics, specifically in smartphones, tablets, laptop screens, flat panel televisions and solar panel arrays. Foils are also used in fuel cells, vanadium redox flow batteries, in seals and gaskets for the chemical and automotive industries, fire retardants, and many other products.
Next Steps
Based on these results, it has been confirmed that Energizer now qualifies to move to the next stage in the manufacturer’s product evaluation process, which is to provide a large bulk sample of concentrate for the purpose of conducting a full production run of graphite foil. Pending a successful production run test, the foil produced would be sent down to the party’s end-customers to be evaluated for use in their respective product applications.
Energizer is currently in discussions with this manufacturer regarding expected timelines and logistics regarding this next stage, including discussions on potential off-take agreements pending a successful trial.

Energizer Resources President and CEO, Craig Scherba, P. Geo., stated:

We are pleased to receive a highly reputable, third-party validation that our Molo concentrate can produce a high-quality, expandable graphite product to manufacture a graphite foil for specialty applications. This positions Energizer well for yet another high demand market for flake graphite.

Connect with Energizer Resources Inc. (TSX:EGZ,OTCQX:ENZR,FWB:YE5) to receive an Investor Kit

The Conversation (0)
×