CoTec Holdings Corp.

CoTec Holdings Corp. Notes HyProMag USA Advancement of Texas Hub and U.S. Magnet Platform

CoTec Holdings Corp. (TSXV:CTH)(OTCQX:CTHCF) ("CoTec" or the "Company") notes the press release issued today by its joint venture, HyProMag USA, LLC ("HyProMag USA"), a U.S.-based leader in rare earth magnet recycling and manufacturing, providing an update on the development of its Ironhead facility (the "Texas Hub") and the build-out of its U.S. commercial platform (together, the "Project"). In its release, HyProMag USA reports that it has increased its projected magnet production capacity, started procurement of key long‑lead equipment and is progressing detailed engineering, feedstock aggregation, and commercial offtake discussions, while also initiating a search for U.S‑based executive leadership to support the next phase of growth.


- YouTube youtube.com

Following completion of the Class 2 AACE[i] capital cost estimate in Q4 2025 and the commissioning of HyProMag's UK and German plants, HyProMag USA has begun ordering critical‑path long‑lead equipment to support a targeted H2 2027 commissioning of the Texas Hub. In parallel, detailed engineering is advancing and the company is in discussions with feedstock suppliers, potential offtake partners and financing counterparties as it transitions from feasibility and pilot validation into execution of a scaled domestic magnet recycling and manufacturing platform in the United States.

Key Highlights from HyProMag USA's Update

  • Long‑lead equipment procurement underway:
    HyProMag USA has commenced procurement of three Hydrogen Processing of Magnet Scrap ("HPMS") vessels along with magnet processing and finishing equipment to secure the development schedule for the Texas Hub.
  • Increased magnet production and updated economics:
    Detailed engineering for a rare earth magnet recycling and manufacturing operation at the Texas Hub, supported by two pre‑processing spoke sites at Intelligent Lifecycle Solution ("ILS") facilities in South Carolina and Nevada, indicates[ii]:
    • Annual production capacity of approximately 1,048 metric tons of recycled sintered neodymium‑iron‑boron ("NdFeB") magnets and 478 metric tons of NdFeB co‑products (total payable capacity of 1,526 metric tons NdFeB) over a 40‑year operating life.
    • Post‑tax Net Present Value ("NPV")[iii] of approximately US$797 million and a real internal rate of return ("IRR") of 37.1% based on forecast market prices[iv],[v].
    • Post‑tax NPV of approximately US$416 million and a real IRR of 26.3% based on current market prices[vi].
    • Total initial capital cost of approximately US$152 million[vii], including an 8.2% contingency and detailed design and engineering costs, over a one‑year construction phase.
  • Power supply discussions initiated:
    HyProMag USA has started formal discussions with Oncor Electric Delivery Company LLC ("Oncor") to provide power to the Texas Hub and expects the facility to be supplied predominantly from renewable resources.
  • Ironhead building and early works:
    Preparatory work is underway for the project execution phase at the Ironhead building in Northlake, Texas, in the Dallas‑Fort Worth metro area, including planning for the delivery and installation of early works equipment.
  • Inserma systems installation at ILS spoke sites:
    Three INSERMA ANOIA S.L. ("Inserma") "3rd generation" hard disk drive ("HDD") magnet separation systems have been installed at the ILS pre‑processing sites in Williston, South Carolina and Las Vegas, Nevada, with additional machine upgrades underway, including AI‑embedded HDD recognition and data traceability functions.
  • Feedstock security and diversification:
    HyProMag USA continues to build its feedstock base through its partnership with ILS[viii] and a broader multi‑source purchasing strategy, targeting additional bulk NdFeB feedstock such as electric motor rotors, wind turbine magnets, speaker assemblies and end‑of‑life MRI machines.
  • Offtake engagement:
    HyProMag USA is in discussions with multiple potential offtake customers and, together with HyProMag Limited, is providing magnet samples for product verification and qualification.
  • U.S. leadership build‑out:
    HyProMag USA has engaged a leading global executive search and consulting firm to identify a U.S.‑based CEO and CFO to support a potential future public listing and continued rollout of the business.
  • Pre‑feasibility expansion study for future plants:
    HyProMag USA is targeting completion of a Class 3 AACE estimate and optimal configuration study in Q3 2026 for additional plants that will mirror the Texas Hub, with the objective of expanding U.S.-based production to approximately 4,656 metric tons of NdFeB saleable products.
  • Financing:
    HyProMag USA is in discussions with three financial institutions and continues to advance its project finance discussions following the procurement of the long‑lead equipment.

Julian Treger, CoTec CEO, commented: "We are making strong progress on our first plant in Texas. Ordering long‑lead items now keeps the Texas Hub on track and signals our confidence in the project and our ability to deliver it on schedule. ILS' growing portfolio of NdFeB feedstock, combined with stockpiling prior to commissioning, is designed to support a smooth ramp‑up and optimized batch production. Any additional feedstock secured can underpin our future expansion of the plans.

Our near‑term focus is on securing feedstock and offtake commitments to support our project financing and enable a construction start in Q4 2026. Importantly, we are not starting from scratch - the underlying technology is already commissioned and operating in the UK[ix] and Germany[x], and our goal is to scale that proven model in the United States. In parallel, we are building the leadership and operational platform needed to support long‑term growth and preparing for a potential future U.S. listing."

Detailed Design and Project Economics

As noted in HyProMag USA's release, the Texas Hub Class 2 AACE Capital Cost Estimate and Study (the "Detailed Design") is being carried out by a multidisciplinary team appointed by CoTec and Mkango and led by independent engineering firms PegasusTSI and BBA. The study, which is approximately 35% complete, includes optimization of the operation as well as an updated capital cost profile, and PegasusTSI and BBA have completed a 3D plant model based on the Class 2 estimate prepared in Q4 2025.

Potential Future U.S. Listing

In December 2025, HyProMag USA's owners, CoTec and Mkango Resources Ltd. (AIM/TSX‑V: MKA) ("Mkango"), announced that they were exploring a potential U.S. listing for HyProMag USA[xi]. Since then, the company has begun engaging prospective advisors and investment banks as part of an ongoing evaluation, with any potential listing remaining subject to project execution milestones, market conditions and regulatory approvals, and not expected before late 2026 or 2027.

About HyProMag USA

HyProMag USA is developing advanced rare earth magnet recycling and manufacturing operations to establish a secure domestic U.S. supply chain for NdFeB magnets, which are critical components in AI infrastructure, defense systems, robotics, electric vehicles, and advanced electronics. Leveraging the HPMS technology developed over 15 years with over US$100 million in R&D investment, HyProMag delivers faster magnet‑to‑magnet short‑loop recycling that uses 88% less energy and reduces carbon emissions by 85% compared to conventional methods. HyProMag USA has been selected by the U.S. State Department as a Minerals Security Partnership project and is targeting 10% of U.S. domestic magnet supply within five years.

Ownership

HyProMag USA LLC is owned 50:50 by CoTec and HyProMag Limited. HyProMag Limited is 100% owned by Maginito Limited, which is owned 79.4% by Mkango and 20.6% by CoTec.

For more information on HyProMag USA, please visit www.hypromagusa.com

About CoTec

CoTec is redefining the future of resource extraction and recycling. Focused on rare earth magnets and strategic materials, CoTec integrates breakthrough technologies with strategic assets to unlock secure, sustainable, and low-cost supply chains.

CoTec's mission is clear: accelerate the energy transition while strengthening strategic mineral supply chains for the countries we operate in. By investing in and deploying disruptive technologies, the Company delivers capital-efficient, scalable solutions that transform marginal assets, tailings, waste streams, and recycled products into high-value critical minerals.

From its HyProMag USA magnet recycling joint venture in Texas, to iron tailings reprocessing in Québec, to next-generation copper and iron solutions backed by global majors, CoTec is building a diversified portfolio with long-term growth, rapid cash flow potential, and high barriers to entry. The result is a differentiated platform at the intersection of technology, sustainability, and strategic materials.

For more information, please visit www.cotec.ca

For further information, please contact:

Braam Jonker - (604) 992-5600

Forward-Looking Information Cautionary Statement

Statements in this press release regarding the Company and its investments which are not historical facts are "forward-looking statements" which involve risks and uncertainties, including statements relating to the Company's interest in HyProMag USA, the lease agreement of HyProMag USA, and its proposed development and management's expectations with respect to its current and potential future investments, including HyProMag USA, and the benefits to the Company which may be implied from such statements. Since forward-looking statements address future events and conditions, by their very nature, they involve inherent risks and uncertainties. Actual results in each case could differ materially from those currently anticipated in such statements, due to known and unknown risks and uncertainties affecting the Company, including but not limited to resource and reserve risks; environmental risks and costs; labor costs and shortages; uncertain supply and price fluctuations in materials; increases in energy costs; labor disputes and work stoppages; leasing costs and the availability of equipment; heavy equipment demand and availability; contractor and subcontractor performance issues; worksite safety issues; project delays and cost overruns; extreme weather conditions; and social and transport disruptions. For further details regarding risks and uncertainties facing the Company please refer to "Risk Factors" in the Company's filing statement dated April 6, 2022, a copy of which may be found under the Company's SEDAR+ profile at www.sedarplus.ca. The Company assumes no responsibility to update forward-looking statements in this press release except as required by law. Readers should not place undue reliance on the forward-looking statements and information contained in this news release and are encouraged to read the Company's continuous disclosure documents which are available on SEDAR+ at www.sedarplus.ca.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release.


Click here to connect with CoTec Holdings Corp. (TSXV:CTH)(OTCQX:CTHCF) to receive an Investor Presentation

Source

CTH:CA
CoTec Holdings

CoTec Holdings Investor Kit

  • Corporate info
  • Insights
  • Growth strategies
  • Upcoming projects

GET YOUR FREE INVESTOR KIT

The Conversation (0)
CoTec Holdings (TSXV:CTH)

CoTec Holdings

Unlocking value from resources and waste with disruptive mineral technologies

Unlocking value from resources and waste with disruptive mineral technologies Keep Reading...

CoTec Holdings: HyProMag USA PFS Outlines 4x U.S. Magnet Capacity

CoTec Holdings Corp. (TSXV:CTH)(OTCQX:CTHCF) noted an independent Pre-Feasibility Study by its 50:50 joint venture, HyProMag USA, on expanding U.S. rare eart...

​Overview

CoTec Holdings (TSXV:CTH, OTCQX:CTHCF) is redefining the future of rare earth magnet recycling and strategic material extraction. Its portfolio spans rare earth magnet recycling and manufacturing, iron tailings reprocessing and emerging copper extraction technologies, all directed at fast-tracking revenue generation and reducing energy and capital intensity compared to conventional mining.

Cotec Holdings mining model

Key Technologies

The company’s modular, capital-efficient model — including joint ventures and strategic subsidiaries — positions it for scalable growth and streamlined execution. With significant advancement in project execution, one completed feasibility study and a second underway, CoTec is moving toward transforming its technology suite into commercial operations.

Why Invest in CoTec?

Why invest in CoTec Holdings

  • Differentiated Growth Model: Capital-light strategy deploying modular technologies at brownfield assets to accelerate timelines and reduce capital intensity.
  • Strategic Commodity Exposure: Exposure to rare earths, iron and copper — key materials for electrification, AI infrastructure, robotics and other critical supply chains.
  • Execution-Stage Portfolio: Three projects advancing through feasibility, engineering and financing stages.
  • Aligned Leadership: Strong insider ownership and experienced management with deep mining and capital markets expertise.
  • Lower-Carbon Production: Technologies designed to reduce energy use, water consumption and emissions relative to conventional mining.

Investor Insight

CoTec Holdings combines proprietary processing technologies with undervalued and legacy resource assets to create high-margin opportunities across rare earths, iron and copper sectors. With three execution-stage projects and a significant discount to attributable NAV, CoTec provides differentiated exposure to strategic minerals tied to electrification, AI infrastructure and supply-chain security.

Company Highlights

  • Technology-Driven Value Creation: Deploys proprietary, low-carbon processing technologies to extract value from waste, tailings and marginal deposits that traditional mining overlooks.
  • Execution-Stage Projects: Advancing three core assets — HyProMag USA rare earth magnet recycling and manufacturing, the Lac Jeannine iron tailings project, and MagIron iron ore feedstock, concentrator and pelletizer — with clear development pathways.
  • Expanding Rare Earth Footprint: HyProMag USA advances its scalable US hub-and-spoke rare earth magnet recycling and manufacturing roll-out using the Hydrogen Processing of Magnet Scrap (“HPMS”) technology, with Inserma HDD pre-processing machines on site in South Carolina and Nevada, supporting feedstock preparation and future commissioning.
  • Strategic Copper Focus: Established a new subsidiary, CoTec Copper, to accelerate targeted investment in copper tailings and copper sulfide deposits globally, leveraging CoTec’s core technologies to unlock value.
  • Iron Ore & Green Steel: Advancing iron tailings reprocessing at Lac Jeannine and supporting the restart of the MagIron pellet project to supply high-grade feedstock for low-carbon steel production.
  • Strong Insider Support: Management and insiders own a majority of shares, reinforcing alignment with long-term value creation.
  • Experienced Leadership: Board and executives bring deep mining, technology and capital markets experience from leading global organizations.

Key Technologies and Assets

HyProMag USA Project

HyProMag USA Project

HyProMag USA is CoTec’s flagship rare earth recycling platform and a cornerstone of its strategy to localize critical mineral supply chains. The project deploys Hydrogen Processing of Magnetic Scrap technology to recover neodymium iron boron magnets from end-of-life electronics and industrial equipment through a simplified hydrogen-based process that bypasses traditional chemical separation and smelting. This short-loop approach dramatically reduces energy use, water consumption and emissions while lowering operating complexity and cost.

The company’s phased development plan is targeting commissioning of its initial finished neodymium-iron-boron magnet production equipment in Texas in 2027. Up to 20 tonnes of magnet blocks supplied by HyProMag Group in the United Kingdom and Germany will be shaped and finished at HyProMag USA's operations for U.S. customers. Integrated Texas Hub's Hydrogen Processing of Magnet Scrap section targeted for Q2 2028.

Watch an overview of HyProMag USA here: https://www.youtube.com/watch?v=v0d7rKdwu_s

Highlights

  • CoTec holds a 60.3 percent economic interest.
  • Bankable Feasibility Study supports a single hub after-tax NPV of US$797 million at forecast prices or US$416 million at current prices with recent updated economics published June 22, 2026
  • Capex estimated at US$152 million per hub.
  • First revenue targeted for Q2 2028.
  • Expansion concept envisions three hubs producing 4,656 tonnes annually with potential NPV of up to US$2.2 billion.
  • Inserma pre-processing machines have arrived at South Carolina and Nevada facilities to support feedstock preparation and scale-up of the hub-and-spoke rollout.
  • Integrated Texas Hub's Hydrogen Processing of Magnet Scrap section targeted for Q2 2028.

Lac Jeannine Iron Project

CoTec Holdings Lac Jeannine Iron project

The Lac Jeannine project is an advanced tailings reprocessing initiative designed to transform legacy mining waste into high-purity iron concentrate for steelmaking. By leveraging existing infrastructure and modern processing technologies, the project aims to unlock value from previously discarded material while simultaneously advancing environmental reclamation. This approach aligns economic return with environmental remediation and supports domestic iron supply.

Metallurgical test work has demonstrated the project's ability to produce a high-purity iron concentrate grading in excess of the standard 67 percent. CEO Julian Treger said that this is a validation resource’s quality and the effectiveness of the company’s processing strategy. “(It also supports) our vision of transforming a historic environmental liability into a strategic asset capable of supporting the global transition to lower-carbon steel production."

Highlights

  • Inferred resource of about 71 Mt at 6.8 percent iron.
  • After-tax NPV7 of US$91.9 million and IRR of 29.6 percent from the recently reported Mineral Resource Estimate announced on Jun. 16, 2026
  • Initial capex estimated at US$65 million.
  • 15-year mine life
  • A 41 percent increase in the resource according to the 2026 PEA, with a global increase in total iron grade from 6.7 to 6.8 percent.

MagIron Project

MagIron represents a restart-ready brownfield iron ore deposit, concentrator and pelletizer project in Minnesota and Indianna, that benefits from an estimated $660m in historical capital investment, targeting the production of direct-reduction grade pellets for low-carbon steelmaking. The project benefits from extensive existing infrastructure and prior capital investment, allowing rapid recommissioning compared with greenfield developments. Its strategic positioning targets rising demand for domestically sourced feedstock for electric arc furnaces and decarbonized steel production.

Senior leadership changes have been made to support the ongoing development of MagIron, especially regarding restarting its iron ore concentrator in Minnesota and pellet plant in Indiana.

Highlights

  • CoTec owns approximately 17 percent.
  • Definitive Feasibility Study shows after-tax NPV of about US$1.60 billion and IRR about 27.6 percent.
  • Average annual production is about 2.6 Mt DR-grade pellets.
  • Life of mine is about 32 years.
  • Payback period is about 3 years and 7 months.
  • Raised additional capital at a pre-money valuation of US$550 million from existing shareholders

Cotec Holdings three-execution stare projects

CoTec Copper

CoTec Copper is a dedicated subsidiary created to accelerate the company’s exposure to copper, one of the most strategically important electrification metals. The unit focuses on acquiring and advancing copper tailings projects and sulphide deposits, particularly in historically productive mining jurisdictions where modern processing technologies can unlock additional value from previously uneconomic material. It leverages CoTec’s existing technology portfolio to enhance recoveries and lower operating costs.

Highlights

  • Targets assets in Tier 1 mining regions across the United States, Australia and Africa.
  • Focuses on both tailings reprocessing and sulphide copper deposits.
  • Designed as a scalable growth platform to expand CoTec’s copper exposure.

Binding Solutions

Binding Solutions provides a cold agglomeration technology that converts ultrafine mineral waste into ISO-compliant pellets or briquettes suitable for industrial use, particularly in green steel production. Unlike traditional pelletizing processes that rely on high-temperature furnaces, this approach operates at low temperatures, drastically reducing energy consumption and emissions while enabling monetization of low-grade or waste materials.

Highlights

  • Uses about 95 percent less energy than conventional pelletizing.
  • Generates about 98 percent fewer emissions.
  • Applicable to iron and other mineral fines.

Ceibo

Ceibo’s oxidative heap-leaching technology is designed to improve copper recovery from sulphide ores such as chalcopyrite, which account for the majority of global copper reserves but are traditionally difficult and costly to process. The process enhances recovery rates while lowering environmental impact and capital intensity, potentially transforming the economics of many existing copper assets.

Highlights

  • Potential recovery improvement from about 31 percent via traditional leaching/concentration to approximately 70-80 percent.
  • Targets refractory sulphide deposits often considered uneconomic.
  • CoTec holds a minority equity interest and a seat on the technical advisory board.
  • Completed Series B C$30M financing led by Energy Impact Partners to fund the scaling of the technology.

WaveCracker

WaveCracker is a microwave-assisted mineral processing technology being advanced in collaboration with McGill University. The system uses targeted microwave energy to weaken mineral structures before conventional processing, improving metal liberation, reducing reagent consumption and lowering overall processing costs.

Highlights

  • Focused initially on copper sulphide applications.
  • Designed to accelerate leaching and recovery kinetics.
  • Builds on more than 30 years of microwave mineral processing research.

Salter Cyclones

Salter Cyclones technology uses multi-gravity separators to recover ultra-fine minerals from tailings streams that traditional processing methods cannot efficiently capture. By enabling recovery of metals from waste material, the system creates new revenue streams while reducing environmental liabilities associated with tailings storage.

Highlights

  • Applicable to iron, manganese and other fine mineral commodities.
  • Exclusive global rights for iron applications and regional exclusivity for manganese during the initial agreement period.
  • Converts waste into high-grade concentrates suitable for market.

Management Team

Julian Treger - Chief Executive Officer and Director

Julian Treger previously served as the CEO of Anglo Pacific Group before establishing Audley Capital Partners. At Audley, Treger directed the team through acquisitions totaling $570 million and achieved a realized Internal Rate of Return (IRR) of 38 percent. Treger continues to serve as the chairman of Audley Capital and holds both a BA and an MBA from Harvard.

Abraham Jonker - Chief Financial Officer

Abraham Jonker has 30 years of experience in mining finance. He previously served as the Lead Independent Director at Mandalay Resources and has been instrumental in leading over $750 million in equity and debt raises. Jonker is a Chartered Accountant in the UK, Canada, and South Africa and holds a Master's in Tax from Rand Afrikaans University.

John Singleton - Chief Operating Officer

John Singleton possesses over 25 years of experience in mining. His career began at De Beers, and he has since held senior leadership roles at Centamin and Rio Tinto. Singleton is a Fellow of the Royal Geological Society and holds degrees from Imperial College London and the University of Bristol.

John McGagh - Technology Consultant

John McGagh has more than 35 years of experience in digital transformation across various industries. He served as the head of innovation at Rio Tinto and is currently the chief digital officer at Snowy Hydro. McGagh is an adjunct professor at the University of Queensland and a Fellow of the Australian Academy of Technology Science and Engineering.

Eugene Hercun - VP Finance & Investor Relations

Eugene Hercun is a CPA, CA, with 15 years of varied experience in mining finance. He has led metal sales negotiations for more than $200 million annually and holds Level 1 of the CFA designation.

Board of Directors

Lucio Genovese, Independent Chairman

Lucio Genovese currently serves as the CEO of Nage Capital and as the chairman of Ferrexpo plc. He previously held senior roles at Glencore, including CEO of the CIS region. Genovese is a Chartered Accountant with degrees in Commerce and Accounting from the University of Witwatersrand.

Tom Albanese, Non - Executive Director

Tom Albanese is the former CEO of Rio Tinto and Vedanta Resources. He serves as lead independent director of Nevada Copper and as a director at Franco-Nevada Corporation. Albanese holds Master's and Bachelor's degrees from the University of Alaska Fairbanks.

Robert (Bob) Harward - Non-Executive Director

Robert Harward is a retired US Navy Vice Admiral (SEAL) and former deputy commander of US Central Command. He served on the US National Security Council and held senior strategy roles at Lockheed Martin and Shield AI.

Erez Ichilov - Non-executive Director

Erez Ichilov previously served as managing director at Traxys Projects, where he led investments in companies such as Nouveau Monde Graphite, Talon Metals, and Li-Cycle. Ichilov holds LLB and MBA degrees.

Sharon Fay - Non-executive Director

Sharon Fay previously served as head of equities and head of responsibility at AllianceBernstein. She built the firm's Corporate Responsibility and Responsible Investment teams. Fay is a Chartered Financial Analyst with a BA from Brown and an MBA from Harvard.

Different types of rare earth magnets laid out over a black surface.

Rare Earths Stocks: 5 Biggest ASX Companies in 2026

Prices and demand for rare earth metals have continued on an upward trend in 2026. The long-term outlook for these important materials remains positive, especially given their precarious supply situation amidst China's dominant control over the market.Rare earth elements are key metals for... Keep Reading...
Dual-colored pawn on a chessboard, flanked by black and white pieces.

European Lithium Investors Approve Critical Metals Takeover

European Lithium (ASX:EUR,OTCQB:EULIF) investors have voted overwhelmingly to fold the company into Critical Metals (NASDAQ:CRML), over 6 months after the acquisition's initial announcement.Shareholders backed the share scheme at meetings held on October 22, with 99.96 percent of votes cast and... Keep Reading...
map showing greenland.

Greenland Rejects Seabed Mining in Unanimous Vote

Greenland’s parliament unanimously passed a resolution instructing its government to draft a law banning deep-sea mining and seabed exploration around the island until at least the end of 2029.Polish news platform RMF 24 reported that the parliament’s decision, passed on October 15, serves as a... Keep Reading...
"Lynas Rare Earths" on phone screen.

Lynas Rare Earths to Buy Meteoric in US$678 Million Deal

Australian miner Lynas Rare Earths (ASX:LYC,OTCQX:LYSDY) is set to acquire Meteoric Resources (ASX:MEI,OTCPL:METOF) in an all-share, US$678 million transaction to consolidate control over the largest known ionic clay rare earth deposit outside of China.The acquisition secures Meteoric’s flagship... Keep Reading...
scandium

Supra Secures US DoD Contract for Scandium Recovery

Supra Elemental Recovery secured a Phase I Small Business Innovation Research contract from the US Department of Defense in pursuit of recovering high-purity scandium from domestic industrial byproducts, the company announced.The contract with the Defense Logistics Agency tasks the Austin-based... Keep Reading...
Side view of a military plane with a large American flag painted on the fuselage.

Pentagon Funds Elmet, Ucore in Critical Minerals Push

The US Department of War announced twin commitments for American critical mineral processors on Monday (September 14), injecting US$450 million into tungsten manufacturer The Elmet Group (NASDAQ:ELMT) and expanding grant funding for rare-earth developer Ucore Rare Metals... Keep Reading...
CoTec Holdings

CoTec Holdings Investor Kit

  • Corporate info
  • Insights
  • Growth strategies
  • Upcoming projects

GET YOUR FREE INVESTOR KIT

Interactive Chart

Latest Press Releases

Related News