West High Yield  Resources Ltd. Announces Exercise of Warrants

West High Yield Resources Ltd. Announces Exercise of Warrants

West High Yield (W.H.Y.) Resources Ltd. (TSXV: WHY,OTC:WHYRF) (FSE: W0H) (the "Company" or "West High Yield") announces announces the exercise share purchase warrants (the "Warrants") of the Company.

One holder of Warrants exercised an aggregate of 50,000 Warrants resulting in the issuance of 50,000 common shares of the Company. The specific Warrants held and exercised by the one warrantholder were exercisable at a price of CAD$0.30 per Warrant, resulting in proceeds to the Company in the amount of CAD$15,000.00 upon such exercise.

Two holders of Warrants exercised an aggregate of 112,000 Warrants resulting in the issuance of 112,000 common shares of the Company. The specific Warrants held and exercised by the two warrantholders were exercisable at a price of CAD$0.35 per Warrant, resulting in proceeds to the Company in the amount of CAD$39,200.00 upon such exercise.

The total gross proceeds to the Company from the combined exercise of CAD$0.30 Warants and CAD$0.35 Warrants was CAD$54,200.00.

About West High Yield

West High Yield is a publicly traded junior mining exploration and development company focused on acquiring, exploring, and developing mineral resource properties in Canada. Its primary objective is to develop its Record Ridge critical mineral (magnesium, silica, and nickel) deposit using green processing techniques to minimize waste and CO2 emissions.

The Company's Record Ridge critical mineral deposit located 10 kilometers southwest of Rossland, British Columbia has approximately 10.6 million tonnes of contained magnesium based on an independently produced National Instrument 43-101 - Standards of Disclosure for Mineral Projects ("NI 43-101") Preliminary Economic Assessment technical report (titled "Revised NI 43-101 Technical Report Preliminary Economic Assessment Record Ridge Project, British Columbia, Canada") prepared by SRK Consulting (Canada) Inc. on April 18, 2013 in accordance with NI 43-101 and which can be found on the Company's profile at https://www.sedarplus.ca.

Contact Information:

West High Yield (W.H.Y.) RESOURCES LTD.

Frank Marasco Jr., President and Chief Executive Officer
Telephone: (403) 660-3488
Email: frank@whyresources.com

Barry Baim, Corporate Secretary
Telephone: (403) 829-2246
Email: barry@whyresources.com

Cautionary Note Regarding Forward-looking Information

This press release contains forward-looking statements and forward-looking information within the meaning of Canadian securities legislation. The forward-looking statements and information are based on certain key expectations and assumptions made by the Company. Although the Company believes that the expectations and assumptions on which such forward-looking statements and information are based are reasonable, undue reliance should not be placed on the forward-looking statements and information because the Company can give no assurance that they will prove to be correct.

Forward-looking information is based on the opinions and estimates of management at the date the statements are made and are subject to a variety of risks and uncertainties and other factors that could cause actual events or results to differ materially from those anticipated in the forward-looking information. Some of the risks and other factors that could cause the results to differ materially from those expressed in the forward-looking information include, but are not limited to: general economic conditions in Canada and globally; industry conditions, including governmental regulation; failure to obtain industry partner and other third party consents and approvals, if and when required; the availability of capital on acceptable terms; the need to obtain required approvals from regulatory authorities; and other factors. Readers are cautioned that this list of risk factors should not be construed as exhaustive.

Readers are cautioned not to place undue reliance on this forward-looking information, which is given as of the date hereof, and to not use such forward-looking information for anything other than its intended purpose. The Company undertakes no obligation to update publicly or revise any forward-looking information, whether as a result of new information, future events or otherwise, except as required by applicable law.

This press release does not constitute an offer to sell or a solicitation of an offer to buy any securities in the United States. The securities of the Company will not be registered under the United States Securities Act of 1933, as amended (the "U.S. Securities Act") and may not be offered or sold within the United States or to, or for the account or benefit of U.S. persons except in certain transactions exempt from the registration requirements of the U.S. Securities Act.

NEITHER THE TSXV NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSXV) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS RELEASE.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/265298

News Provided by Newsfile via QuoteMedia

WHY:CA
West High Yield

West High Yield Investor Kit

  • Corporate info
  • Insights
  • Growth strategies
  • Upcoming projects

GET YOUR FREE INVESTOR KIT

The Conversation (0)
West High Yield

West High Yield


Keep reading...Show less

Focused on critical minerals with near-term strategic high-grade magnesium/silica/nickel/iron project

West High Yield  Resources Ltd. Announces Exercise of Options and Warrants

West High Yield Resources Ltd. Announces Exercise of Options and Warrants

West High Yield (W.H.Y.) Resources Ltd. (TSXV: WHY,OTC:WHYRF) (FSE: W0H) (the "Company" or "West High Yield") announces announces the exercise of certain stock options (the "Options") and share purchase warrants (the "Warrants") of the Company.

Options

News Provided by Newsfile via QuoteMedia

Keep reading...Show less
West High Yield  Resources Ltd. Welcomes Final EAO Decision on Record Ridge Magnesium Project

West High Yield Resources Ltd. Welcomes Final EAO Decision on Record Ridge Magnesium Project

West High Yield (W.H.Y.) Resources Ltd. (TSXV: WHY,OTC:WHYRF) (FSE: W0H) (the "Company" or "West High Yield") is very pleased to announce that the British Columbia Environmental Assessment Office (the "EAO ") has issued its Final Designation Decision confirming that the Company's Record Ridge Industrial Minerals Project (the "Project"), near Rossland, British Columbia, will not be designated as a reviewable project under Section 11 of the Environmental Assessment Act (2018) (British Columbia) (the "Act").

The EAO reviewed applications submitted under Section 11 of the Act and concluded that the Project's potential effects are being appropriately addressed through existing regulatory processes, including the Mines Act (British Columbia) and the Environmental Management Act (British Columbia). The EAO's Final Designation Report and Reasons for Decision are publicly available on the EAO's Project Information Centre: EAO EPIC – Record Ridge Project Documents.

News Provided by Newsfile via QuoteMedia

Keep reading...Show less
West High Yield  Resources Ltd. Announces Proceeds from Exercise of Warrants

West High Yield Resources Ltd. Announces Proceeds from Exercise of Warrants

West High Yield (W.H.Y.) Resources Ltd. (TSXV: WHY) (FSE: W0H) (the "Company" or "West High Yield") announces the receipt of proceeds from the exercise of certain warrants (the "Warrants") of the Company.

Two holders of Warrants (the "Warrantholders") exercised an aggregate of 280,000 Warrants resulting in the issuance of 280,000 common shares of the Company (each, a "Warrant Share"). The specific Warrants held and exercised by the Warrantholders were exercisable at a price of CAD$0.30 per Warrant Share, resulting in gross proceeds to the Company in the amount of CAD$84,000.00 upon such exercise. The Warrants exercised by the Warrantholders were issued to the Warrantholders, among others, as part of a private placement offering of the Company that closed on November 14, 2024.

News Provided by Newsfile via QuoteMedia

Keep reading...Show less
West High Yield  Resources Ltd. Announces Stock Option Grant

West High Yield Resources Ltd. Announces Stock Option Grant

West High Yield (W.H.Y.) Resources Ltd. (TSXV: WHY) (FSE: W0H) (the "Company" or "West High Yield") is pleased to announce that its board of directors approved and authorized the grant and issuance of a total of 50,000 stock options (each an "Option" and collectively, the "Options") effective June 3, 2025.

All of the Options were issued to a consultant of the Company. One (1) Option entitles the holder thereof to purchase one (1) common share of the Company (each a "Share" and collectively, the "Shares"). All of the Options vest on their date of grant and have a term of ten (10) years from their date of grant. The exercise price of the Options was set at CAD$0.48 per Share, which was the closing trading price of the Shares on the TSX Venture Exchange (the "TSXV") on the day immediately preceding their date of grant.

News Provided by Newsfile via QuoteMedia

Keep reading...Show less
West High Yield  Resources Ltd. Announces Proceeds from Exercise of Warrants

West High Yield Resources Ltd. Announces Proceeds from Exercise of Warrants

West High Yield (W.H.Y.) Resources Ltd. (TSXV: WHY) (FSE: W0H) (the "Company" or "West High Yield") announces announces the receipt of proceeds from the exercise of certain warrants (the "Warrants") of the Company.

One holder of Warrants (the "Warrantholder") exercised 50,000 Warrants resulting in the issuance of 50,000 common shares of the Company (each, a "Warrant Share"). The specific Warrants held and exercised by the Warrantholder were exercisable at a price of CAD$0.30 per Warrant Share, resulting in gross proceeds to the Company in the amount of CAD$15,000 upon such exercise. The Warrants exercised by the Warrantholder were issued to the Warrantholder, among others, as part of a private placement offering of the Company that closed on November 9, 2024.

News Provided by Newsfile via QuoteMedia

Keep reading...Show less
Allied Critical Metals Intersects 12 Metres of 4.27% Tungsten  Incl. 6 Metres of 8.39% Tungsten  at Its 100% Owned Borralha Tungsten Project in Northern Portugal

Allied Critical Metals Intersects 12 Metres of 4.27% Tungsten Incl. 6 Metres of 8.39% Tungsten at Its 100% Owned Borralha Tungsten Project in Northern Portugal

Highlights:

  • Drill hole Bo_RC_14/25 intersects 12.0 metres @ 4.27% WO3 including 6.0 metres @ 8.39% WO3 from 252.00 metres downhole, confirming one of the highest-grade tungsten intercepts reported in Western exploration, especially for high quality wolframite tungsten mineralization. This validates early visual observations and supports the presence of a controlled high-grade breccia corridor.
  • Over 2,500 metres of drilling completed across nine holes, with multiple intercepts of visible wolframite and chalcopyrite. The remaining 1,600 metres of the 4,200 metre campaign now underway with a further fully funded 1,528 metres now also planned with two rigs active on site.
  • Tungsten price reaches high of $545 USD/MTU, up approximately 40% in last 4 months as demand for the critical mineral increases with further supply chain restrictions from non-Western countries.

Allied Critical Metals Inc. (CSE: ACM,OTC:ACMIF) (OTCQB: ACMIF) (FSE: 0VJ0) ("Allied" or the "Company"), which is focused on its 100% owned past producing Borralha and Vila Verde tungsten projects in northern Portugal, is pleased to announce an update on its ongoing 4,200-metre Reverse Circulation (RC) drill program at the Borralha Tungsten Project. The initial phase of the campaign was launched in early June 2025 and continues to deliver strong technical progress, supporting: (i) an updated Mineral Resource Estimate (MRE), anticipated in Q4 2025; (ii) advanced metallurgical testing; and (iii) the Company's Preliminary Economic Assessment (PEA) for a large scale processing facility located at Borralha, targeted for completion later this year. A further fully funded 1,528 metre drilling is now also planned for the fourth quarter of 2025 to build off of the successes in July.

High-grade results from drill hole Bo_RC_14/25 marks a breakthrough for the Borralha Project, with further drilling and a Preliminary Economic Assessment already underway. The results are particularly timely as tungsten price has reached a new high of $545 USD/MTU, which is an increase of approximately 40% over the past four months as demand for the critical mineral increases in the face of further supply chain restrictions from non-Western countries [Source: FastMarkets].

Roy Bonnell, CEO & Director of Allied, commented, "These initial assay results are a major step forward for the Borralha Project and a clear validation of our geological model. The exceptional tungsten grades intersected in Bo_RC_14/25 place Borralha among the most exciting undeveloped critical mineral assets in Europe. As we advance toward the Mineral Resource update and Preliminary Economic Assessment, these results strengthen our confidence in Borralha's potential to become a cornerstone of Western countries' strategic raw material supply."

As of July 30, 2025, Allied had completed approximately 2,500 metres of drilling across nine drill holes. Drilling operations were temporarily paused during August in compliance with seasonal fire safety restrictions and successfully resumed on September 1, 2025. The program continues to advance towards its objectives, with a clear focus on three key technical priorities:

  • Expanding and upgrading the existing tungsten resource in accordance with National Instrument 43-101-Standards of Disclosure for Mineral Projects ("NI 43-101"), with emphasis on increasing tonnage and converting Inferred Resources to Indicated Resources classification; and

  • Collecting representative material for metallurgical testing, to validate marketable concentrate grades at 65% WO₃.

Overview of Drilling to Date:

  • Drill hole Bo_RC_14/25 confirmed the presence of high-grade tungsten mineralization, with visual observations of massive wolframite supporting the interpretation of a potentially enriched corridor within the breccia-hosted system.

  • Drill hole Bo_RC_15/25 aimed to access the west deep step-out potential at the south area of the breccia. Visual inspection confirmed the presence of breccia together with evidence of wolframite. Assays of this drill hole are ongoing.

  • Drill holes Bo_RC_16/25 and Bo_RC_17/25 are infill drillholes to increase the Resource resolution and knowledge of the interchange between the large bulkable medium grade central backbone of the south area of the breccia, into the medium size high-grade corridors deeper to west. As expected, breccia with visible mineralization was visible, and the pending assays results will provide proper interpretation.

  • Drill holes Bo_RC_18/25 , Bo_RC_19/25 and Bo_RC_26/25 are infill drillholes at the central and lower grade area of the Breccia. Here the goal was to improve the Resource model resolution and grade at this section. Some visible mineralization was identified, but the pending assays are necessary to confirm the potential upgrade.

  • Drill holes Bo_RC_21/25 and Bo_RC_22/25 are drillholes meant to step-out the previous discovery of a potential new high-grade large corridor at the Bo_RC_11/24 drill hole that has no resources due to lack of composites pairs. Both drillholes encountered continuous breccia and multiple zones with visible sulphides and polymetallic indicators, including wolframite and chalcopyrite, reinforcing the continuity and depth of the mineralized system. Pending assays will confirm if a new economical vector for considerable Resource expansion is present at the north deep area of the breccia.

Table 1 – Collar locations

New ID Coordinates (WGS84) Az.(º) Dip .(º) DEPTH (m)
Bo_RC_14/25 585445 4611405 109 80 265.00
Bo_RC_15/25 585347 4611368 109 70 255.00
Bo_RC_16/25 585406 4611329 105 60 251.00
Bo_RC_17/25 585426 4611295 109 75 237.00
Bo_RC_18/25 585461 4611431 109 75 241.00
Bo_RC_19/25 585470 4611493 109 82 247.00
Bo_RC_21/25 585484 4611552 109 85 370.00
Bo_RC_22/25 585484 4611552 109 70 375.00
Bo_RC_26/25 585586 4611449 289 60 287.00

Cannot view this image? Visit: https://images.newsfilecorp.com/files/11632/265023_a4b3ded4f486c9d6_001.jpg

Figure 1 - Drill collar plan showing planned holes for the ongoing 5,728 m RC campaign at the Borralha Project. The red outline delineates the main mineralized breccia zone.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/11632/265023_a4b3ded4f486c9d6_001full.jpg

All samples from the nine completed drill holes have been dispatched to ALS Laboratories in Seville for geochemical analysis, with initial assay results now beginning to return. The first results received from hole Bo_RC_14/25 confirm the presence of tungsten mineralization, consistent with earlier visual observations. Additional assay results from the remaining holes are expected over the coming weeks.

Building on Visual Confidence with Excellent Drill Results

The early stages of the 2025 RC drill campaign at Borralha Project were marked by highly encouraging visual intercepts across several holes. With the arrival of the first assays, that confidence has now been materially validated. Initial data confirms not only the continuity of breccia-hosted mineralization but also suggests that the Borralha Project hosts very high-grade tungsten intercepts as described below.

The results from the Bo_RC_14/25 drill hole represents a major technical milestone for Allied. The grade and length of the intercept reinforce the Company's position that the Borralha Project is one of Europe's most strategically important undeveloped tungsten assets. These assays will feed directly into the upcoming Mineral Resource Estimate (MRE) and Pre-Economic Assessment (PEA), both of which are expected to underpin Allied's near-term development plans.

Assay Highlights from Bo_RC_14/25 include, from 252.00m downhole:

  • 12.0 m @ 4.27% WO₃*, including

  • 6.0 m @ 8.39% WO₃*

*WO3 Tungsten trioxide % converted from W ppm multiplied by 1.2611 stoichiometric factor. W ppm results are from ALS Laboratories analytical method ME-MS81. For the ME-MS81 above detection limit of >10,000 ppm assays, ME-XRF15c is used.

A geological cross section for hole Bo_RC_14/25 is presented below, illustrating the location of the high-grade intercept within the broader breccia-hosted mineralized zone. The section highlights the continuity of the tungsten-bearing structures, the correlation with visual observations, and the potential for further extensions at depth and along strike.

Cannot view this image? Visit: https://images.newsfilecorp.com/files/11632/265023_a4b3ded4f486c9d6_002.jpg

Figure 2 - Geological Cross-Section for hole Bo_RC_14/25.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/11632/265023_a4b3ded4f486c9d6_002full.jpg

Technical Information and Quality Control / Quality Assurance

Drillholes were all conducted with RC diamond bit drilling. All sample bags were pre-marked prior to drilling. They were each identified with an internal sequence number used as a sample identifier, both the sample for analysis and its reject samples. Each analytical sample bag is filled with a portion of 2 m length of drilled rock and each reject sample bag will take another representative portion of 1 m length of drilled rock. Thus, each two reject samples will be the equivalent to one assay sample. The splitting is done as part of the drilling process using a rotary splitter.

The analytical samples were collected directly from the rig splitter according to a sampling list that documented the metres and sampling sequence for each drill hole. This list also identified which sample should be collected in duplicate as well as which certified reference material ('CRM') were to be placed in the numerical sequence. The CRMs were randomly inserted at every 20 samples (5%), and duplicate samples were collected every 20 samples (5%). Thus, there's an alternating CRM and Duplicate every 10th sample.

The analytical and reject samples are then transported in boxes from the drilling site to the core shed by a designated employee. The analytical samples were stored on labelled palettes for later direct shipping to the ALS preparation laboratories in Seville, Spain. Later, the pulp and reject samples were securely stored in the logging room on the property.

To the best of the Company's knowledge, no drilling, sampling, recovery, or other factors exist that would materially compromise the accuracy or reliability of the referenced data

RC samples were prepared by ALS preparation laboratory in Seville, Spain, crushing the sample with up to 70% of the material passing a 2 mm screen, and then each sample was split to 250 g and pulverized with hardened steel to 85% passing a 75 μm screen. Each resultant sub-sample was then direct shipped to their certified assay laboratory Dublin Road, Loughrea, Co., Ireland.

The samples are analyzed by the ME-MS81 ALS method that applies a lithium borate fusion to the sample and the result of this fusion is measured by applying an ICP-MS. It is also applied to the ALS ME-4ACD81 procedure which reports base metals by a 4-acid digestion and later analyzed by an ICP-MS procedure. Any over-limit tungsten values were re-analysed at the same laboratory by a W-XRF15b procedure that uses a lithium borate fusion with an XRF analysis. The analytical results were then securely emailed to the Company.

Qualified Person's Statement and Data Verification

The scientific and technical information in this news release has been reviewed and approved by Mr. Vítor Arezes, BSc, MIMMM (QMR), Vice-President Exploration of Allied Critical Metals, who is a Qualified Person for the purposes of National Instrument 43-101 – Standards of Disclosure for Mineral Projects. Mr. Arezes is not independent of Allied Critical Metals as he is an officer of the Company.

The Qualified Person has verified the data disclosed herein by reviewing core logs and drill records, validating collar and downhole survey data, assessing database integrity, reviewing assay QA/QC (CRMs, blanks, and duplicates), and reconciling reported intervals to the original laboratory certificates. The verification did not identify any factors that would materially affect the accuracy or reliability of the information presented.

Project Momentum and Strategic Positioning

The drill program is a cornerstone of Allied's strategy to position Borralha as Europe's leading high-grade tungsten development, combining grade, scale, and near-term production potential in a secure EU jurisdiction. With tungsten designated as a Critical and Strategic Raw Material by both the European Union and the United States, Borralha directly addresses Western supply vulnerabilities at a time of rising global demand and constrained Chinese exports. As one of the only advanced-stage tungsten assets in Western Europe, Borralha is uniquely placed to support defense readiness, AI, EVs, and the EU's Critical Raw Materials Act objectives for domestic sourcing.

This campaign also supports Allied's permitting and development milestones, including the submission of additional technical information in response to follow-up questions from the Environmental Impact Assessment (EIA) evaluation committee–a standard step in the review process. The Company expects to deliver its formal response by third quarter of 2025, with a final decision anticipated in fourth quarter of 2025 or early first quarter of 2026.

Next Steps

Allied is now preparing to complete the final 1,600 metres of drilling to reach the planned total of 4,200 metres for the current Phase 1 campaign. The remaining holes, including Bo_RC_20/25, Bo_RC_23/25, and Bo_RC_24/25 and Bo_RC_25/25, have been selected based on strong visual intercepts, structural continuity, and geological insights from previously completed drilling. Minor adjustments to the drill plan are being implemented to maximize coverage of key mineralized corridors while maintaining program efficiency. In addition, a further 1,528 metres drilling is now also planned for the fourth quarter of 2025 to build off of the successes in July.

Following a scheduled pause in August due to the regional fire season, drilling resumed on September 1 with two rigs operating simultaneously. The campaign has quickly regained momentum and remains on track to complete the targeted meterage within the planned timeframe. Field operations continue to run efficiently, positioning Allied to generate the technical data required for the upcoming Mineral Resource Estimate (MRE) update and Preliminary Economic Assessment (PEA).

New Advisory Role; Other Corporate

The Company is announcing that Colin Padget has resigned his position as director effective September 1, 2025, but is being retained as an advisor to the Company going forward. The Company wishes to thank Colin for his contributions and looks forward to his continued involvement as an advisor to the Company.

In addition, the Company prematurely announced the grant of stock options (Options) and restricted share units (RSUs) in its news release dated September 2, 2025. In light of the drill results in this press release, the Company is postponing the grant to a future date.

ON BEHALF OF THE BOARD OF DIRECTORS,

"Roy Bonnell"

Roy Bonnell
CEO and Director

For further information or investor relations inquiries, please contact:

Dave Burwell
Vice President, Corporate Development
Email: daveb@alliedcritical.com
Tel: 403-410-7907
Toll Free: 1-888-221-0915

About Tungsten

It is critical to understand the difference between wolframite mineralization of tungsten and scheelite mineralization of tungsten. Scheelite often reports higher grades (0.3%-1.0% WO₃) but is more costly and complex to process, requiring flotation methods with higher capital and operating expenditures and lower recoveries.i In contrast, wolframite, which is the focus of Allied Critical Metals can be processed more efficiently using gravity and magnetic separation, resulting in lower costs and higher recoveries, making lower grades (~0.15%-0.25% WO₃) economically viable in wolframite deposits.ii For example, a wolframite deposit with 0.4% WO₃ over 3 metres can be more profitable than a scheelite deposit with 0.7% WO₃ over the same interval due to lower processing costs and higher recovery rates.iii

In Western exploration drilling, scheelite tungsten grades typically range from 0.3% to 1.0% WO₃.iv The cut-off grade for economic viability is generally around 0.1% WO₃, with highly efficient operations able to mine at grades as low as 0.08% WO₃.v Skarn deposits, a common deposit type, typically range from 0.34% to 1.4% WO₃, with intercepts of 0.4% WO₃ over 1-5 metres considered very good and 0.7% WO₃ over 1-3 metres considered very high-grade.vi Intercept lengths can range from 0.6 metres to over 100 metres, with longer intercepts at strong grades generally preferred for economic mining. For example, two leading western tungsten mines demonstrate the standards for scheelite with results like 9.5 m @ 0.76% WO₃ and 14.1 m @ 0.58% WO₃vii at the Sangdong Mine* in South Korea and 18 m @ 1.00% WO₃ reported at the Mt. Carbine Tungsten Project* in Australia.viii

In contrast, the Panasqueira Mine* in Portugal typically reports 1-5 m @ 0.25-0.5% WO₃ as a wolframite depositix A result like 0.5% WO₃ over 3 metres is considered typical and strong within Western tungsten exploration standards, especially for wolframite tungsten mineralization.x

To understand tungsten, it is also important to recognize that China, Russia, and North Korea control approximately 87% of the world's tungsten supply, using cheap labour and minimal environmental standards in authoritarian regimes.xi As a result, production costs and grades in these countries are not comparable to Western projects, which operate under higher labour, ESG, and energy cost structures.xii Evaluating projects outside these regions provides a realistic benchmark for what grades and intercepts are economically viable while supporting secure, NATO-aligned supply chains.xiii

For Allied, this context is significant, as the Company's grades, ranging from 0.2% to 1.0% WO₃, are considerable against global wolframite benchmarks, with intercepts that meet or exceed typical Western results.xiv The Company's focus on wolframite will correspond to lower processing costs and higher recoveries, supporting project economics even at lower grades.xv Allied's operations in secure jurisdictions align with Western critical mineral needs, avoiding geopolitical risks associated with China and Russia while positioning the Company to benefit from growing tungsten demand across defense, aerospace, and electrification sectors.xvi Allied's strong grades, low-cost processing advantages, and secure location position it as a strategic and responsible tungsten exploration company, well placed to support robust project economics in a rising-demand market.xvii

*The results cited for the Sangdong Mine, the Panasqueira Mine and the Mt. Carbine Tungsten Project are based on public disclosures and are presented for industry benchmarking and comparison purposes only. Allied has no interests in those mineral projects.

About Allied Critical Metals Inc.

Allied Critical Metals Inc. (CSE: ACM,OTC:ACMIF) (OTCQB: ACMIF) (FSE: 0VJ0) is a Canadian-based mining company focused on the expansion and revitalization of its 100% owned past producing Borralha Tungsten Project and the Vila Verde Tungsten Project in northern Portugal with advantageous wolframite tungsten mineralization. Tungsten has been designated a critical metal by the United States and other western countries, as they are aggressively seeking friendly sources of this unique metal. Currently, China, Russia and North Korea represent approximately 86% of the total global supply and reserves. Tungsten is used in a variety of industries such as defense, automotive, manufacturing, electronics, and energy.

Please visit our website at www.alliedcritical.com.

Also visit us at:
LinkedIn: https://www.linkedin.com/company/allied-critical-metals-inc
X: https://x.com/@alliedcritical/
Instagram: https://www.instagram.com/alliedcriticalmetals/

The Canadian Stock Exchange does not accept responsibility for the adequacy or accuracy of this release.

Cautionary Statement Regarding Forward-Looking Information

This news release contains "forward-looking statements", including with respect to the use of proceeds. Wherever possible, words such as "may", "would", "could", "should", "will", "anticipate", "believe", "plan", "expect", "intend", "estimate", "potential for" and similar expressions have been used to identify these forward-looking statements. These forward-looking statements reflect the current expectations of the Company's management for future growth, results of operations, performance and business prospects and opportunities and involve significant known and unknown risks, uncertainties and assumptions, including, without limitation, those listed in the Company's Listing Statement and other filings made by the Company with the Canadian securities regulatory authorities (which may be viewed under the Company's profile at www.sedarplus.ca ). Examples of forward-looking statements in this news release include, but are not limited to, statements regarding the proposed timeline and use of proceeds for exploration and development of the Company's mineral projects as described in the Company's Listing Statement, news releases, and corporate presentations. Should one or more of these risks or uncertainties materialize or should assumptions underlying the forward-looking statements prove incorrect, actual results, performance or achievements may vary materially from those expressed or implied by the forward-looking statements contained in this news release. These factors should be considered carefully, and prospective investors should not place undue reliance on the forward-looking statements. This list is not exhaustive of the factors that may affect any of the Company's forward-looking statements and reference should also be made to the Company's Listing Statement dated April 23, 2025 and news release dated May 16, 2025, and the documents incorporated by reference therein, filed under its SEDAR+ profile at www.sedarplus.ca for a description of additional risk factors. The Company disclaims any intention or obligation to revise forward-looking statements whether as a result of new information, future developments or otherwise, except as required by law.

News Provided by Newsfile via QuoteMedia

Keep reading...Show less
Allied Critical Metals Joins the Critical Minerals Forum to Advance Secure Tungsten Supply

Allied Critical Metals Joins the Critical Minerals Forum to Advance Secure Tungsten Supply

Allied Critical Metals Inc. (CSE: ACM,OTC:ACMIF) (OTCQB: ACMIF) (FSE: 0VJ0) ("Allied" or the "Company"), which is focused on its 100% owned past producing Borralha and Vila Verde tungsten projects in northern Portugal, is pleased to announce its membership in the Critical Minerals Forum ("CMF" a leading U.S.-based non-profit initiative dedicated to strengthening secure and transparent global critical mineral supply chains.

The CMF convenes key stakeholders across the critical minerals value chain - including companies, investors, end-users, policymakers, and research organizations - with a shared mission of building reliable and resilient supply networks for minerals essential to technology, defense, energy, and advanced manufacturing.

News Provided by Newsfile via QuoteMedia

Keep reading...Show less
AU$50 notes on a concrete surface.

Lincoln Minerals Raises AU$1.5 Million to Advance South Australian Critical Minerals Assets

Lincoln Minerals (ASX:LML) has raised AU$1.5 million to advance its critical minerals projects.

The company closed a renounceable entitlement issue on Tuesday (September 2) after first announcing it on August 5. Participants had to hold shares as of August 8 and have a registered address in Australia or New Zealand.

In Tuesday's release, Lincoln said it has agreed to undertake a follow-on placement amounting to AU$750,000. The funds will be used to accommodate excess demand and provide additional capital for project execution.

Keep reading...Show less
Metallic ores on conference table with international flags in background.

Canada Backs Port Expansions, Strikes Critical Minerals Deal With Germany

Ottawa’s push to strengthen trade links with Europe is moving ahead on two tracks: investing in new port infrastructure at home and formalizing a minerals partnership with Germany abroad.

Speaking alongside German Chancellor Friedrich Merz in Berlin, Prime Minister Mark Carney confirmed Tuesday (August 26) that Canada would support major new infrastructure projects, including a new port in Churchill and an expansion of Montreal’s Contrecœur terminal.

Keep reading...Show less
Allied Critical Metals Appoints Former U.S. Secretary of Homeland Security Kirstjen Nielsen as a Director of Allied Critical Metals USA

Allied Critical Metals Appoints Former U.S. Secretary of Homeland Security Kirstjen Nielsen as a Director of Allied Critical Metals USA

Highlights:

  • Secretary Nielsen joins the board of directors of Allied USA.
  • Secretary Nielsen is a leading expert on United States national security matters and has advised government agencies, private sector companies, international organizations, and NGOs on assessing their risk posture and increasing their resiliency.
  • Allied USA is focused on importation, marketing and sales of tungsten into the United States.

Allied Critical Metals Inc. (CSE: ACM,OTC:ACMIF) (OTCQB: ACMIF) (FSE: 0VJ0) ("Allied" or the "Company"), which is focused on its 100% owned past producing Borralha and Vila Verde tungsten projects in northern Portugal, is pleased to announce the appointment of former U.S. Secretary of Homeland Security Kirstjen M. Nielsen as a Director of Allied's wholly owned U.S. subsidiary, Allied Critical Metals (USA) Inc. ("Allied USA").

News Provided by Newsfile via QuoteMedia

Keep reading...Show less
Close-up of two people in suits shaking hands with blue lights overlay.

Tivan Secures Mineral Exploration Deed for Sandover Fluorite Project

Tivan (ASX:TVN) said on Monday (August 18) that it has signed a mineral exploration deed for its Sandover fluorite project in the Northern Territory.

According to the company, this is its first secured deed with the Central Land Council (CLC).

CLC is the statutory body established under the Aboriginal Land Rights (Northern Territory) Act 1976, representing the traditional owners and native title holders of Central Australia.

Keep reading...Show less
West High Yield

West High Yield Investor Kit

  • Corporate info
  • Insights
  • Growth strategies
  • Upcoming projects

GET YOUR FREE INVESTOR KIT

Latest Press Releases

Related News

×