Visible Copper Intersected in Maiden Drilling at Pearl

Golden Mile Resources

Keep reading...Show less

Multiple exploration opportunities across base and precious metals in Australia and the US

OUTCROP SILVER ANNOUNCES PARTNER FUNDED MAIDEN DRILL PROGRAM AT THE PEARL COPPER PROJECT, ARIZONA

Outcrop Silver & Gold Corporation (TSXV:OCG, OTCQX:OCGSF, DE:MRG) ("Outcrop Silver") is pleased to announce the commencement of the maiden drill program at the Pearl Copper Project located in Arizona United States . The drilling campaign will be fully funded by Golden Mile Resources Limited (ASX: G88), whereby Golden Mile is currently earning a 51% interest through funding this A$2 million maiden drill program. Outcrop Silver retained a 1% net smelter return (NSR) royalty.

Highlights

Outcrop Silver advances the Pearl Copper project through an earn-in agreement with Golden Mile Resources (ASX:G88). Program fully funded by Golden Mile .
The Pearl project is located in the prolific Laramide porphyry copper district, which is responsible for 70% of the United States of America's copper production.
All drilling permits secured from the Bureau of Land Management (BLM) and the Arizona State Land Department (ASLD).
The maiden drill program to test high-grade copper-silver-gold targets at the Odyssey and Ford prospects has commenced.

" Golden Mile's fully funded drill program moves Pearl forward at no cost to Outcrop Silver and exemplifies our strategy of unlocking value from non-core assets while we focus capital on expanding the high-grade Santa Ana silver project in Colombia ," stated Ian Harris , President & CEO of Outcrop Silver.

The Pearl Copper project is located in the Laramide porphyry copper district, one of the most prolific copper-producing regions globally, accounting for approximately 70% of U.S. copper production. The project sits immediately north of BHP's past-producing San Manuel-Kalamazoo Mine and along the trend with Capstone Copper's active Pinto Valley Mine, benefiting from exceptional infrastructure and a skilled local workforce.

Following the receipt of all required exploration permits, including the Notice of Intent (NOI) from the BLM and the Special Land Use Permit (SLUP) and Geologic Field Operation Plan (GFOP) from the ASLD, drilling has commenced. This maiden drill program consists of 14 to 16 reverse circulation (RC) holes totaling up to 1,800 metres, and will test two priority targets.

Transaction

On September 12, 2024 Golden Mile purchased an option on Pearl for A$100,000 (Australian Dollars) with Outcrop Silver retaining a 1% NSR royalty. Golden Mile has the option to earn-in to 51% by funding A$2,000,000 in exploration expenditures by September 12, 2027 . Golden Mile may also earn an additional 34% by funding an additional A$10,000,000 in exploration expenditures within 5 years. Upon completing the earn-in a joint venture will be formed with both parties funding proportionally. If either party dilutes below 10%, their interest will convert to an additional 1% NSR royalty. At such time that a JORC compliant resource achieves 750,000 tonnes of contained copper at a minimum grade of 0.3%, Golden Mile will pay Outcrop Silver A$2,000,000 .

The Pearl Copper project was acquired through the amalgamation with Zacapa Resources. Zacapa's portfolio also included the Kramer Hills brownfield oxide gold project in San Bernardino, California and the South Bullfrog, gold project in Beatty, Nevada adjacent to Anglo Gold's Silicon project.

Qualified Person

Edwin Naranjo Sierra is the designated Qualified Person within the meaning of the National Instrument 43-101 and has reviewed and verified the technical information in this news release. Mr. Naranjo holds a MSc. in Earth Sciences, and is a Fellow of the Australasian Institute of Mining and Metallurgy (FAusIMM). Mr. Naranjo Sierra is a consultant to the company and is therefore independent for the purposes of NI 43-101.

About Outcrop Silver

Outcrop Silver is a leading explorer and developer focused on advancing its flagship Santa Ana high-grade silver project in Colombia . Leveraging a disciplined and seasoned team of professionals with decades of experience in the region. Outcrop Silver is dedicated to expanding current mineral resources through strategic exploration initiatives.

At the core of our operations is a commitment to responsible mining practices and community engagement, underscoring our approach to sustainable development. Our expertise in navigating complex geological and market conditions enables us to consistently identify and capitalize on opportunities to enhance shareholder value. With a deep understanding of the Colombian mining landscape and a track record of successful exploration, Outcrop Silver is poised to transform the Santa Ana project into a significant silver producer, contributing positively to the local economy and setting new standards in the mining industry.

About Golden Mile

Golden Mile is a project development and mineral exploration company. The primary focus is on growing the Company with a multi-asset and multi-commodity strategy through advancing core projects, acquiring high-quality assets, and tactical alliances with joint venture partners.

ON BEHALF OF THE BOARD OF DIRECTORS

Neither the TSX Venture Exchange nor its Regulation Services Provider (as such term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Certain information contained herein constitutes "forward-looking information" under Canadian securities legislation. Generally, forward-looking information can be identified by the use of forward-looking terminology such as "potential," "we believe," or variations of such words and phrases or statements that certain actions, events or results "will" occur. Forward-looking statements are based on the opinions and estimates of management as of the date such statements are made and they are subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of Outcrop Silver to be materially different from those expressed or implied by such forward-looking statements or forward-looking information, including: the receipt of all necessary regulatory approvals, capital expenditures and other costs, financing and additional capital requirements, completion of due diligence, general economic, market and business conditions, new legislation, uncertainties resulting from potential delays or changes in plans, political uncertainties, and the state of the securities markets generally. Although management of Outcrop Silver have attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements or forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements and forward-looking information. Outcrop Silver will not update any forward-looking statements or forward-looking information that are incorporated by reference.

SOURCE Outcrop Silver & Gold Corporation

View original content to download multimedia: http://www.newswire.ca/en/releases/archive/May2025/08/c1166.html

News Provided by Canada Newswire via QuoteMedia

Keep reading...Show less

International Lithium Announces Private Placement

International Lithium Corp. (TSXV: ILC,OTC:ILHMF) (OTCQB: ILHMF) (FSE: IAH) (the "Company" or "ILC") is pleased to announce a non-brokered private placement (the "Offering") of up to 66,666,667 common shares at CAD $0.015 per share to raise gross proceeds of up to $1,000,000. The Company may pay finders fees on a portion of the placement.

Proceeds of the private placement will be used partly to allow the Company to invest in growing its Southern African and Canadian operations and partly for general working capital purposes. Payments to persons conducting Investor Relations activities are expected not to exceed 10% of the proceeds.

News Provided by Newsfile via QuoteMedia

Keep reading...Show less

Strong drilling targets identified next to high-grade gold-copper mine

HIGHLIGHTS:

Cygnus has identified numerous drilling targets near the historic high-grade Cedar Bay mine, which produced 400Koz Au and 61Kt Cu at an average of 4% CuEq, ² within the Chibougamau Project
Targets identified through ongoing review of historical data and drill logs using Cygnus' innovative custom-built AI solution
This highly successful approach has already delivered significant gold and copper results at Golden Eye, which will be included in the imminent resource update
Cedar Bay closed in 1990 when the price of copper was just US$1,150/t (US$0.52/lb) and gold was US$380/oz, and is located less than 3km from Cygnus' central processing plant
Cygnus aims to significantly increase the remaining unmined high-grade resource at Cedar Bay, which currently stands at 130kt at 8.9% CuEq Indicated and 230kt at 8.5% CuEq Inferred ¹
Mineralisation is open in numerous directions, with high-grade intersections outside of the current resource, including: ³
- 3.4m @ 16.8% CuEq (4.8% Cu, 15.2g/t Au & 23.3g/t Ag) (CB-27-9)
- 2.9m @ 9.6% CuEq (8.4% Cu, 1.0g/t Au & 43.0g/t Ag) (CB-27-6)
At Corner Bay, final infill results have been received and will feed into next month's resource update; These include:
- 3.5m @ 4.9% CuEq (4.2% Cu, 0.5g/t Au & 27.3g/t Ag) (CB-25-123)
- 1.8m @ 7.7% CuEq (6.3% Cu, 0.9g/t Au & 45.9g/t Ag) (CB-25-125)

Cygnus Executive Chairman David Southam said : "These latest targets, supported by historical drilling data, are located right next to a high-grade mine, making them compelling.

"Given their potential to help drive resource growth, we are mobilising another rig with the aim of drilling the targets ASAP.

"In the meantime, we are feeding the final results from Corner Bay into our updated resource model, which is set to be released next month. The resource update, combined with a pipeline of targets and multiple rigs turning, ensures we are maximising our ability to create significant shareholder value.

"Uncovering these new growth targets through our compilation strategy adds further weight to the work we are doing in the background which has already delivered success at Golden Eye in a mere six months of taking ownership. The Chibougamau camp has successfully produced a significant amount of high-grade gold and copper over a long history with multiple mines that have not been geologically or economically examined in over 35 years".

Cygnus Metals Limited (ASX: CY5; TSXV: CYG; OTCQB: CYGGF) ("Cygnus" or the "Company") is pleased to announce new promising targets next to an historic high-grade mine within its Chibougamau Copper-Gold Project in Quebec.

News Provided by GlobeNewswire via QuoteMedia

Keep reading...Show less

Vertex Minerals Limited Underground Production Commences at the Reward Gold Mine Project

Perth, Australia (ABN Newswire) - Vertex Minerals Limited (ASX:VTX,OTC:VTXXF) (OTCMKTS:VTXXF) commences underground production at the Reward Gold Mine, moving to high grade gold production.

Operational Milestones

- First blasting of gold producing ore on the Lady Belmore Reef was undertaken over the weekend.

- The material will start complementing the low-grade gold stockpile feed to the Gravity Processing Plant, until all mining fronts are enabled.

- In forthcoming weeks, VTX remains firmly on track to commence processing of high-grade stope ore from the underground mine.

- The Reward Underground 11kva to 1000v Transformer Substation is installed and powered up. Cabling to the Primary Fan is completed.

- Access Drives to the two Starter Stopes are being cleaned, ready for the Production Rig to commence drilling the High-Grade Stopes.

- Decline 3 developed on the Mica Vein is fully dewatered, ready to be flatback mined for providing further gold feed to the Gravity Plant.

- Vertex aims to have developed at least 4 mining fronts and maintain continuous feed to the plant, which will involve various mining methods.

- Mining the Reward Gold Mine - Resource 225kozs at 16.7g/t

As previously announced, the startup mine schedule includes mining 2,075 tonnes at 17.8 g/t Au from a developed airleg stope block. The planned stope width is the same as the interpretation of the mineralisation. Refer to VTX ASX announcement 4th June 2025

Given the stope will take some time to extract, additionally, the Vertex Geology and Mining Team have brought forward a very high-grade long hole stope to commence mining in August 2025. The high-grade long hole stope isto be mined with a long hole stope method, using the Epiroc Production Rig.

*To view photographs, please visit:
https://abnnewswire.net/lnk/2U10401V

About Vertex Minerals Limited:

Vertex Minerals Limited (ASX:VTX,OTC:VTXXF) is an Australian based gold exploration company developing its advanced Hargraves and Hill End gold projects located in the highly prospective Eastern Lachlan Fold Belt of Central West NSW. Other Company assets include the Pride of Elvire gold project and Taylors Rock gold/nickel/lithium project both located in the Eastern Goldfields of WA. The focus of Vertex Minerals is to advance the commercial production of gold from its NSW projects embracing an ethical and environmentally sustainable approach.

Source:
Vertex Minerals Limited

News Provided by ABN Newswire via QuoteMedia

Keep reading...Show less

Prismo Metals Announces Closing of Oversubscribed Private Placement

(TheNewswire)

Vancouver, British Columbia, August 8th, 2025 TheNewswire Prismo Metals Inc. (" Prismo " or the " Company ") (CSE: PRIZ,OTC:PMOMF) (OTCQB: PMOMF) is pleased to announce that further to its news releases dated July 3, 2025, July 18, 2025 and July 31, 2025, the Company has proceeded with an upsized closing of its previously announced non-brokered private placement (the "Private Placement" ) of units of the Company (" Units ") at an issue price of $0.06 per Unit (the " Third Closing "). The closing was increased from 6,000,000 Units to the issuance of 6,425,000 Units for gross proceeds of $385,500.

News Provided by TheNewsWire via QuoteMedia

Keep reading...Show less

Name	Metal	Location	Stage	Area in Hectares	Current Ownership Percentage	Future Ownership % if options exercised and/or residual interest	Operator or JV Partner
Raleigh Lake	Lithium Rubidium	Ontario	Dec 2023 : PEA for Li completed Apr 2023 Maiden Resource Estimates for Li and Rb	32,900	100%	100%	ILC
Firesteel	Copper Cobalt	Ontario	Aeromagnetics and Drilling started mid 2024	6,600	90%	90%	ILC
Wolf Ridge	Lithium	Ontario	Pre-Drilling	5,700	0%	100%	ILC
Mavis Lake	Lithium	Ontario	May 2023 Maiden Resource Estimate	2,600	0%	0% (carries an extra earn-in payment of AUD$ 0.75 million if resource targets met)	Critical Resources Ltd
Avalonia	Lithium	Ireland	Drilling	29,200	0%	0% 2.0% Net Smelter Royalty	GFL Intl Co Ltd (owned by Ganfeng Lithium Group Co.Ltd)
Forgan/ Lucky Lakes	Lithium	Ontario	Drilling		0%	0% 1.5% Net Smelter Royalty	Power Minerals Ltd

This announcement has been authorised for release by the Board of Directors of Cygnus.

David Southam	Ernest Mast	Media:
Executive Chair	President & Managing Director	Paul Armstrong
T: +61 8 6118 1627	T: +1 647 921 0501	Read Corporate
E: info@cygnusmetals.com	E: info@cygnusmetals.com	T: +61 8 9388 1474

HOLEID	X	Y	Z	Azi	Dip	Depth	From (m)	To (m)	Interval (m)	Cu (%)	Au (g/t)	Ag (g/t)	CuEq (%)
CB-25-123	554619	5510023	394.0	96.5	-60	574.0	559.0	560.8	1.8	6.3	0.9	45.9	7.4
CB-25-124	554619	5510023	394.0	92.0	-66	679.0	667.1	669.8	2.6	1.5	0.1	6.8	1.6
CB-25-125	554619	5510023	394.0	84.0	-64	643.5	594.0	598.5	4.5	3.4	0.4	22.1	3.9
CB-25-127	555071	5509889	402.8	90.0	-60	300.0	267.1	269.4	2.3	2.7	0.5	10.4	3.2

Deposit	Category	Tonnes (k)	Cu Grade (%)	Au Grade (g/t)	Cu Metal (kt)	Au Metal (koz)	CuEq Grade (%)
Corner Bay (2022)	Indicated	2,700	2.7	0.3	71	22	2.9
Corner Bay (2022)	Inferred	5,900	3.4	0.3	201	51	3.6
Devlin (2022)	Measured	120	2.7	0.3	3	1	2.9
	Indicated	660	2.1	0.2	14	4	2.3
	Measured & Indicated	780	2.2	0.2	17	5	2.4
	Inferred	480	1.8	0.2	9	3	2.0
Joe Mann (2022)	Inferred	610	0.2	6.8	1	133	5.5
Cedar Bay (2018)	Indicated	130	1.6	9.4	2	39	8.9
Cedar Bay (2018)	Inferred	230	2.1	8.3	5	61	8.5
Total	Measured & Indicated	3,600	2.5	0.6	90	66	3.0
Total	Inferred	7,200	3.0	1.1	216	248	3.8

Criteria	JORC Code explanation	Commentary
Sampling techniques	Nature and quality of sampling (eg cut channels, random chips, or specific specialised industry standard measurement tools appropriate to the minerals under investigation, such as down hole gamma sondes, or handheld XRF instruments, etc). These examples should not be taken as limiting the broad meaning of sampling.	All drilling conducted by Cygnus Metals at the Chibougamau Project was completed under the supervision of a registered professional geologist as a Qualified Person (QP) who is responsible and accountable for the planning, execution, and supervision of all exploration activity as well as the implementation of quality assurance programs and reporting. All Cygnus drilling reported is NQ size (47.8 mm diameter).
	Include reference to measures taken to ensure sample representativity and the appropriate calibration of any measurement tools or systems used.	All sample collection, core logging, and specific gravity determinations were completed by Cygnus Metals under the supervision of a professionally qualified registered geologist. NQ core was marked for splitting during logging and is sawn using a diamond core saw with a mounted jig to assure the core is cut lengthwise into equal halves. Half of the cut core is placed in clean individual plastic bags with the appropriate sample tag. QA/QC is done in-house by Cygnus Metals geologists with oversight from the Senior Geologist. The check samples (blanks and standards – 4% of total samples with another 2% of core duplicates taken on half split core) that were inserted into the sample batches are verified against their certified values and are deemed a pass if they are within 3 standard deviations of the certified value. The duplicates are evaluated against each other to determine mineralization distribution (nugget). If there are large discrepancies in the check samples, then the entire batch is requested to be re-assayed. The samples are then placed in bags for shipment to the offsite laboratory's facility. The remaining half of the core is retained and incorporated into Cygnus's secure, core library located on the property.
	Aspects of the determination of mineralisation that are Material to the Public Report. In cases where ‘industry standard' work has been done this would be relatively simple (eg ‘reverse circulation drilling was used to obtain 1 m samples from which 3 kg was pulverised to produce a 30 g charge for fire assay'). In other cases more explanation may be required, such as where there is coarse gold that has inherent sampling problems. Unusual commodities or mineralisation types (eg submarine nodules) may warrant disclosure of detailed information.	Industry standard sampling practices were used with sample lengths ranging from 0.3 m to 1.0 m and respected geological contacts. Sample tags were placed at the beginning of each sample interval and the tag numbers were recorded in a centralised database. Sampling practice is considered to be appropriate to the geology and style of mineralisation.
Drilling techniques	Drill type (eg core, reverse circulation, open-hole hammer, rotary air blast, auger, Bangka, sonic, etc) and details (eg core diameter, triple or standard tube, depth of diamond tails, face-sampling bit or other type, whether core is oriented and if so, by what method, etc).	Diamond core was drilled using surface diamond rigs with industry recognised contractors Miikan Drilling. Miikan is a joint venture between Chibougamau Diamond Drilling Ltd., the First Nations community of Ouje-Bougoumou and the First Nations community of Mistissini both located in the Eeyou Istchee territory. Drilling was conducted using NQ core size. Directional surveys have been taken at 50m intervals.
Drill sample recovery	Method of recording and assessing core and chip sample recoveries and results assessed. Measures taken to maximise sample recovery and ensure representative nature of the samples. Whether a relationship exists between sample recovery and grade and whether sample bias may have occurred due to preferential loss/gain of fine/coarse material.	Diamond core recovery was measured for each run and calculated as a percentage of the drilled interval. Overall, the core recoveries are excellent in the Chibougamau area. As a result, no bias exists.
Logging	Whether core and chip samples have been geologically and geotechnically logged to a level of detail to support appropriate Mineral Resource estimation, mining studies and metallurgical studies.	All core was geologically and geotechnically logged. Lithology, veining, alteration and mineralisation are recorded in multiple tables of the drillhole database.
	Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc) photography.	Geological logging of core is qualitative and descriptive in nature.
	The total length and percentage of the relevant intersections logged.	100% of the core has been logged.
Sub- sampling techniques and sample preparation	If core, whether cut or sawn and whether quarter, half or all core taken. If non-core, whether riffled, tube sampled, rotary split, etc and whether sampled wet or dry. For all sample types, the nature, quality and appropriateness of the sample preparation technique. Quality control procedures adopted for all sub-sampling stages to maximise representivity of samples. Measures taken to ensure that the sampling is representative of the in-situ material collected, including for instance results for field duplicate/second-half sampling. Whether sample sizes are appropriate to the grain size of the material being sampled.	The NQ diameter the core was sawn in half following a sample cutting line determined by geologists during logging and submitted for analysis on nominal 1m intervals or defined by geological boundaries determined by the logging geologist. Each core sample is assigned a tag with a unique identifying number. Sample lengths are typically one metre but can be depending on zone mineralogy and boundaries. This sampling technique is industry standard and deemed appropriate. Sample sizes are considered appropriate to grain size of the materials being sampled.
Quality of assay data and laboratory tests	The nature, quality and appropriateness of the assaying and laboratory procedures used and whether the technique is considered partial or total.	Sample (NQ size half core) preparation and fire assay analysis were done at Bureau Veritas Commodities Canada Ltd ("BV") in Timmins, Ontario, and ICP-ES multi-elements analysis was done at BV in Vancouver, B.C. Samples were weighed, dried, crushed to 70% passing 2 mm, split to 250 g, and pulverized to 85% passing 75 µm. Samples are fire assayed for gold (Au) (50 g) and multi-acid digestion ICP-ES finish, for 23 elements (including key elements Ag, Cu, Mo). Samples with visible gold or likely to have gold grains are analysed with metallic screen fire assay. Samples assaying >10.0 g/t Au are re-analysed with a gravimetric finish using a 50 g charge. Samples assaying >10% Cu are re-analysed with a sodium peroxide fusion with ICP-ES analysis using a 0.25 g charge.
	For geophysical tools, spectrometers, handheld XRF instruments, etc, the parameters used in determining the analysis including instrument make and model, reading times, calibrations factors applied and their derivation, etc.	None used.
	Nature of quality control procedures adopted (eg standards, blanks, duplicates, external laboratory checks) and whether acceptable levels of accuracy (i.e. lack of bias) and precision have been established.	At Bureau Veritas, laboratory QC procedures involve the use of internal certified reference material as assay standards, along with blanks, duplicates and replicates.
Verification of sampling and assaying	The verification of significant intersections by either independent or alternative company personnel.	Verification of sampling was made by Cygnus Metals and other professional consultant geologists.
	The use of twinned holes.	No hole is twinned.
	Documentation of primary data, data entry procedures, data verification, data storage (physical and electronic) protocols.	All logging data was completed, core marked up, logging and sampling data was entered directly into the database. The logged data is stored on the site server directly.
	Discuss any adjustment to assay data.	There was no adjustment to the assay data.
Location of data points	Accuracy and quality of surveys used to locate drill holes (collar and down-hole surveys), trenches, mine workings and other locations used in Mineral Resource estimation.	The location of the drill holes and the aiming points for the orientation of the drill holes were indicated on the ground using identified stakes. The stakes marking the location of the drillholes were set up and located with a Garmin GPS model "GPSmap 62s" (4m accuracy). Surveys are collected using a Reflex EZ-Shot® single-shot electronic instrument with readings collected at intervals of approximately every 30 m downhole plus a reading at the bottom of the hole.
	Specification of the grid system used.	The grid system used is UTM NAD83 (Zone 18).
	Quality and adequacy of topographic control.	A Digital Terrane Model (DTM) has been used to accurately plot the vertical position of the holes, which is considered to provide an adequate level of topographic control.
Data spacing and distribution	Data spacing for reporting of Exploration Results.	The drill spacing for recent drilling is considered appropriate for this type of exploration.
	Whether the data spacing and distribution is sufficient to establish the degree of geological and grade continuity appropriate for the Mineral Resource and Ore Reserve estimation procedure(s) and classifications applied.	No resource estimation is made.
	Whether sample compositing has been applied.	No sample compositing has been applied.
Orientation of data in relation to geological structure	Whether the orientation of sampling achieves unbiased sampling of possible structures and the extent to which this is known, considering the deposit type.	Recent drilling is orientated approximately at right angles to the currently interpreted strike of the known interpreted mineralisation.
Orientation of data in relation to geological structure	If the relationship between the drilling orientation and the orientation of key mineralised structures is considered to have introduced a sampling bias, this should be assessed and reported if material.	No bias is considered to have been introduced by the existing sampling orientation.
Sample security	The measures taken to ensure sample security.	Core was placed in wooden core boxes close to the drill rig by the drilling contractor. The core was collected daily by the drilling contractor and delivered to the secure core logging facility. Access to the core logging facility is limited to Cygnus employees or designates.
Audits or reviews	The results of any audits or reviews of sampling techniques and data.	No audits or reviews of sampling techniques or data have been undertaken, therefore information on audits or reviews is not yet available.

Visible Copper Intersected in Maiden Drilling at Pearl

Golden Mile Resources Investor Kit

GET YOUR FREE INVESTOR KIT

Investor Insight

Overview

Company Highlights

Key Projects

Pearl Copper Project

Quicksilver Nickel-Cobalt Project

Board and Management Team

Damon Dormer – Managing Director

Francesco Cannavo – Non-executive Director

Grant Button – Non-executive Chairman

Michele Alessandro Bina – Non-executive Director

Justyn Stedwell - Company Secretary

Martin Dormer – Exploration Manager

Latest News

Golden Mile Resources Investor Kit

GET YOUR FREE INVESTOR KIT

Latest Press Releases

Related News

TOP STOCKS