In Q3 2024, the Company drilled two diamond holes totalling 607.77 metres (see Table 1). The holes were scouting in nature, drilled near the southwestern claims boundary and they represent the first holes drilled by Troy Minerals on the Project (see Figure 3). This release is for all initial selective core samples for which analytical results have now been received. Follow up infill / continuous sampling results are pending and once received and processed, reported intersections will be recalculated.
Key Highlights
- The two DDH holes at the Lake Owen Project targeted titanium (TiO2) and vanadium (V2O5) mineralization associated with magnetite in gabbro, as well as potential reef style PGE mineralization.
- Although sampling along the holes was visually selective, associated with high magnetite zones, several anomalous zones of Titanium (>1%) have been encountered.
- Elevated values of Vanadium are also associated with increased titanium enrichment.
- Most importantly, associated with these anomalous zones, is elevated concentration of Scandium (Sc), a rare critical metal belonging to the REE group with no domestic supply in the United States.
"The first hole drilled by Troy at our Lake Owen project, from historical data knowledge, was planned targeting to intersect magnetite, titanium and vanadium mineralization; beyond that, it also revealed seriously elevated Scandium, a rare-earth element (REE), classified by the USGS as a critical metal." said Yannis Tsitos, President of Troy Minerals. "Scandium has green-energy technologies applications, but additionally it is the most effective known microalloying element that can strengthen aluminium, while also offering improved flexibility, resistance to heat and corrosion, and lighter weight, therefore Scandium finds applications in the space, military and civilian aviation industries. We have recently expanded our total Claims footprint over the mafic layered intrusion at Lake Owen in Wyoming to 185 Claims and Troy is currently designing the 2nd Phase, summer 2025, exploration program."
Figure 1. Lake Owen, Location Map, Wyoming, USA
Figure 2. Lake Own Project, Troy's Claims on Topo Map
Drilling Results & Exploration Outlook
Several anomalous zones of titanium (>1%) were encountered. Elevated values of vanadium are correlative with the titanium. Sampling was highly selective to assess various lithological units and all zones with magnetite content up to 15-20% and or visible sulfide mineralization. Magnetite content in the gabbro in hole LO24-01 is consistently about 5-10%. In LO24-01, the limited sampling to date suggests a large zone of titanium and vanadium-enrichment and higher relative values correlate with the green gabbro.
Figure 3. Drill Hole Locations on top of Geology and Company's Claims
Associated with these anomalous zones are elevated concentration of scandium. Anomalous values of scandium were found in sampled Mag Gabbro and especially with Green Gabbro zones containing >10% magnetite. Scandium is considered a critical metal by the United States Geologic Survey (USGS) and a rare earth element (REE). This presents an additional critical element with no current domestic supply. The USGS recognizes the critical metal potential of the Lake Owen Complex and flew an airborne survey over the entire complex in 2023, including all of Troy's claims. The high value of scandium coupled with the total dependence on the metal from China and Russia makes scandium a potentially high-value critical metal target for the Lake Owen Project.
Table 1: Drill hole specifications
Drill hole LO24-01 was designed to test the extent of the Lower Mag Gabbro down to the basement contact. Drilling revealed a series of interlayered magnetic gabbro and a distinctive coarse-grained green gabbro. The green coloration is imparted by pyroxenes altering to chlorite. These layers are generally constrained to widths of less than 4 metres.
Table 2. Drill hole LO24-01 intersections
1: All intersections lengths are drill indicated thicknesses; insufficient work has been completed to reliably determine true thicknesses.
2: Analysis of titanium and vanadium converted to titanium oxide and vanadium oxide using conversion factor of 1.6681 and 1.7852, respectively.
3: The release is for all initial selective core samples for which analytical results have now been received. Follow up infill / continuous sampling results are pending and once received and processed, reported intersections will be recalculated.
Drill hole LO24-02 was also planned to test the extent of the Lower Mag Gabbro as well as the contact with basement rocks. This was collared lower in the stratigraphic sequence than hole LO24-01 starting in a weakly magnetite gabbro. At 28 metres, weak to strong foliation or schistosity was present. This schist is likely of gabbroic to slightly granitic in composition. It is speculated that these schists reflect basement rock ripped up into the intrusion as large xenoliths.
The drill program was managed on-site day-to-day by BRS Engineering Inc. of Riverton, WY under the supervision of Troy personnel. The drill core was quick-logged at the drill site by BRS staff including collection of geotechnical, magnetic susceptibility data and selective testing utilizing an XRF device. Upon completion of drilling, all drill core was shipped directly to BRS Engineering's secure facility in Riverton, WY.
Drill core was detail logged and sampled by Company staff. Core was selectively sampled based on lithology and mineralization with 45 samples taken. Core was split by saw with samples sent to ALS Global's laboratory in Reno, NV for preparation and analysis. Samples were analyzed for multi-elements (ME-MS61) and gold plus PGE's (PGM-MS23L).
The Company's quality control monitoring consisted of inserting certified reference material in the sample stream. No quality control issues were identified.
Figure 4. DDH Cross Section, LO24-01
Drill hole LO24-02 intersected gabbroic units that are weakly magnetic and contain no anomalous values of titanium, vanadium, or scandium.
Only a very small portion of the Lake Owen Complex has been drill-tested to date. As currently mapped, the prospective Lower Mag Gabbro unit continues along strike to the west. The Company has yet to drill test the stratigraphically higher Upper Mag Gabbro. Surface mapping and sampling in 2023 identified two massive magnetite rock samples that returned 8.812% TiO2 and 0.548% V2O5, and 15.505% TiO2 and 0.586% V2O5 (Figure 5) These represent priority drill targets for 2025. An historical drill hole was completed here but there was no assessment of titanium, vanadium, or scandium.
Figure 5. Rock Geochemistry, Titanium
Rock sampling also returned four anomalous scandium results (>59 ppm): three collected from gabbro-norite outcrop within the mapped "Layered Unit" which strikes across the Property and is stratigraphically situated between the Upper Mag and Lower Mag Gabbro units; and one from near the collar of LO24-02, within the Lower Mag Gabbro (Figure 6).
Figure 6. Rock Geochemistry, Scandium on top of Airborne Magnetics (1st Vertical Derivative)
A massive magnetic anomaly due to the very high magnetite content that covers Troy's claims and the interpretation of the airborne magnetic survey will be reported and discussed in another news release in due course.
* Cautionary Note
The reader is cautioned that grab samples are selective by nature and may not represent the true grade or style of mineralization across the property.
Qualified Person
The information contained in this news release has been reviewed and approved by Ted Vander Wart, P.Geo., a consultant to the Company, who is a qualified person as defined under National Instrument 43-101.
About Troy Minerals
Troy Minerals is a Canadian based publicly listed mining company focused on building shareholder value through acquisition, exploration, and development of strategically located "critical" mineral assets. Troy is aggressively advancing its projects within the silica (silicon), vanadium, and rare earths industries within regions that exhibit high and growing demand for such commodities, in both North America and Central-East Asia. The Company's primary objective is the near-term prospect of production with a vision of becoming a cash-flowing mining company to ultimately deliver tangible monetary value to shareholders, state, and local communities.
ON BEHALF OF THE BOARD,
Rana Vig | CEO & Director
Telephone: 604-218-4766
Email: rana@ranavig.com
Forward-Looking Statements
Statement Regarding Forward-Looking Information: This release includes certain statements that may be deemed "forward-looking statements". All statements in this release, other than statements of historical facts, that address events or developments that Troy Resources Inc. (the "Company") expects to occur, are forward-looking statements. Forward-looking statements are statements that are not historical facts and are generally, but not always, identified by the words "expects", "plans", "anticipates", "believes", "intends", "estimates", "projects", "potential" and similar expressions, or that events or conditions "will", "would", "may", "could" or "should" occur. Although the Company believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance and actual results may differ materially from those in the forward-looking statements. Factors that could cause the actual results to differ materially from those in forward-looking statements include results of exploration activities may not show quality and quantity necessary for further exploration or future exploitation of minerals deposits, volatility of commodity prices, and continued availability of capital and financing, permitting and other approvals, and general economic, market or business conditions. Investors are cautioned that any such statements are not guarantees of future performance and actual results or developments may differ materially from those projected in the forward-looking statements. Forward-looking statements are based on the beliefs, estimates and opinions of the Company's management on the date the statements are made. Except as required by applicable securities laws, the Company undertakes no obligation to update these forward-looking statements in the event that management's beliefs, estimates or opinions, or other factors, should change.
The Canadian Securities Exchange has not reviewed this press release and does not accept responsibility for the adequacy or accuracy of this news release.
Source
Click here to connect with Troy Minerals Inc. CSE:TROY, OTCQB:TROYF, FSE:VJ3 to receive an Investor Presentation
Figure 1. Lake Owen, Location Map, Wyoming, USA 
Figure 2. Lake Own Project, Troy's Claims on Topo Map
Figure 3. Drill Hole Locations on top of Geology and Company's Claims 
Table 1: Drill hole specifications 
Table 2. Drill hole LO24-01 intersections
Figure 4. DDH Cross Section, LO24-01 
Figure 5. Rock Geochemistry, Titanium 
Figure 6. Rock Geochemistry, Scandium on top of Airborne Magnetics (1st Vertical Derivative)
