Altech Batteries Limited  Acquisition of Additional Investments CERENERGY and Silumina

Altech Batteries Limited Acquisition of Additional Investments CERENERGY and Silumina

Perth, Australia (ABN Newswire) - Altech Batteries Limited (ASX:ATC) (FRA:A3Y) (OTCMKTS:ALTHF) is pleased to announce that it has executed a binding Term Sheet to acquire Altech Advanced Materials AG's (FRA:AMA) 25% equity interest in Altech Energy Holdings GmbH (AEH) (75% holder of CERENERGY(R)) and 25% equity interest in Altech Industries Germany GmbH (AIG) (100% holder of Silumina AnodesTM) including all outstanding shareholder loans from AIG and AEH to AAM; together the 'Acquisitions'.

Highlights

- Altech's offer to acquire Altech Advanced Materials AG (AAM) project stakes accepted by AAM

- Altech to acquire additional 18.75% stake in CERENERGY(R) Project and additional 25% stake in Silumina AnodesTM Project including outstanding shareholder loans to AAM

- Altech will hold 75% of CERENERGY(R) & 100% of Silumina AnodesTM projects post acquisition

- Fraunhofer remains as 25% JV partner of the CERENERGY(R) project

- Altech will issue AAM approximately 532 million fully paid ordinary shares

- Acquisitions are valued at approximately A$23.3 million

- AAM market capitalisation on Frankfurt Stock Exchange is approximately A$38.7 million

- Based on DFS, and risk-adjusted AAM value, both projects valued at A$77 million

- AAM post-acquisition will be 21% shareholder of ATC

- New simplified corporate structure serves to optimise financing options

- Potential for ATC to divest acquired interests to strategic partners for project financing

- Subject to shareholder approval by both ATC and AAM

- General Meeting to be held inclusive of Independent Expert Report

In accordance with the project's ownership, the AAM equity interests to be acquired by ATC represent an additional 18.75% stake in the CERENERGY(R) project and an additional 25% stake in the Silumina AnodesTM project (refer Figure 1* Corporate Structure before and after Acquisitions).

Fraunhofer remains as 25% JV partner of the CERENERGY(R) project.

As consideration for the Acquisitions, and subject to shareholder approval, Altech will issue to AAM approximately 532 million fully paid ordinary shares, resulting in AAM holding 21% of Altech's issued share capital post Acquisitions. Based on the volume weighted average price (VWAP) of Altech shares being $0.044 over the 15 trading days prior to this announcement, the total consideration offered is valued at A$23.3 million. The shares proposed to be issued to AAM will be subject to a voluntary escrow period of 12 months from the date of issue. The Acquisition is still subject to several conditions precedent, including the approval of the Acquisitions by shareholders at the General Meetings of AAM and ATC.

Valuation of Transaction

AAM's current market capitalisation on the Frankfurt Stock Exchange A$38.7 million (equal to EUR23.2 million), while the consideration offered for its sole assets amounts to A$23.3 million.

The Cerenergy Project DFS has a Net Present Value (NPV) of A$281 million, with AAM's 18.75% stake equating to A$52 million at full financing. Applying a standard 0.23 NAV discount for financing risk, the adjusted valuation is A$12 million. The Silumina Project DFS has an NPV of A$1.14 billion, with AAM's 25% stake translating to A$285 million. After applying the same 0.23 NAV discount, the adjusted valuation stands at A$65 million. In total, the risk-adjusted value of both projects is A$77 million, compared to the A$23.3 million consideration offered for their acquisition.

AAM initially acquired a 25% stake in both the CERENERGY and Silumina Projects from ATC for a total consideration of A$8 million. Following the acquisition, AAM made additional capital contributions in response to cash calls from both project entities, providing a total of A$10.8 million to support project development, operational expenses, and financing commitments. This brings AAM's total investment in the projects to date to A$18.8 million compared to the A$23.3 million consideration offered for their acquisition.

Post Acquisitions

Post Acquisitions, Altech will own 100% of the Silumina AnodesTM Project and 75% of the CERENERGY(R) Battery Project, with Fraunhofer as 25% joint venture partner.

Strategic Rationale and Benefits

This transaction represents a pivotal moment for Altech's strategic growth. By acquiring 100% ownership of Silumina AnodesTM and 75% ownership of CERENERGY(R), Altech is positioning itself to accelerate the development and commercialisation of these high-value projects. The Silumina AnodesTM project is a breakthrough in battery material technology, incorporating high-purity alumina in silicon anodes to improve battery performance. The CERENERGY(R) project, meanwhile, is at the forefront of next-generation sodium chloride battery development, offering a sustainable alternative to conventional lithium-ion technology.

Additionally, the transaction presents a practical solution to recent funding challenges by AAM. Uncertainty among German investors regarding AAM's ownership structure has complicated AAM's fundraising efforts and hindered sustained support in Germany.

Altech will have the autonomy to make key investment and operational decisions without requiring external approvals, thereby enhancing project execution efficiency. Furthermore, the Acquisitions will provide Altech with a stronger negotiation position when engaging with potential strategic partners, customers, and financiers. Through these transactions, AAM will retain long-term upside potential through its new equity stake in Altech. This structure aligns the interests of both companies and ensures that AAM continues to benefit from future successes. AAM will remain as an investment company on the Frankfurt Stock Exchange rather than holding direct interest of both projects.

Consolidating ownership reduces the complexity of project governance and enhances Altech's ability to execute strategic initiatives with greater agility and less complexity. Additionally, the issuance of shares to AAM in lieu of cash payments preserve Altech's balance sheet strength, allowing it to deploy capital more effectively towards project development and commercialisation.

The Board of Altech believes the transaction will deliver significant strategic benefits, including:

- Consolidation of ownership in the Silumina AnodesTM and CERENERGY(R) projects, enabling streamlined decision-making and project execution

- Improved operational flexibility and efficiency to fast-track commercialisation efforts

- Addressing recent funding challenges faced by AAM and improving capital structure alignment

Conditions Precedent

The completion of the Acquisitions is subject to:

- All necessary regulatory approvals, including:

o ASX Listing Rule 7.1 shareholder approval for the issuance of consideration shares.

o Shareholder approval under item 7, section 611 of the Corporations Act 2001 (Cth), to the extent that AAM, or any of its shareholders, will increase its voting power above 20% in Altech.

- Approval from the Australian Treasurer under the Foreign Acquisitions and Takeovers Act 1975 (Cth), if required.

- Approval by AAM's shareholders meeting

- Execution of an escrow deed between Altech and AAM regarding the voluntary escrow conditions.

Board Recommendation

Mr Hansjoerg Plaggemars and Mr Uwe Ahren, being current Managing Directors of AAM, did not take part in any voting on the Acquisitions in their position as Board members of Altech and do not make a recommendation on the proposal. Mr Iggy Tan, being a previous Managing Director of AAM (resigned 31 December 2024) did not take part in any voting on the Acquisitions and does not make a recommendation on the proposal.

The Independent Directors of Altech, consisting of Mr Luke Atkins, Mr Dan Tenardi and Mr Peter Bailey, unanimously recommend that shareholders vote in favour of the Acquisitions, subject to the Independent Expert's Report concluding that the transaction is fair and/or reasonable to Altech shareholders. Altech's Board strongly believes that this transaction will enhance shareholder value over the long term by consolidating ownership, streamlining decision-making and ensuring that both projects progress efficiently towards commercialisation. The transaction structure ensures that AAM remains aligned with Altech's success while addressing funding constraints in a manner that benefits all stakeholders.

Next Steps

Altech will continue working closely with AAM to finalise definitive agreements and complete all required regulatory and shareholder approvals. Shareholders will be kept informed of any significant developments, and further announcements will be made as key milestones are achieved. The Company remains committed to executing this strategic initiative in a manner that enhances shareholder value and accelerates its growth objectives. The Board looks forward to engaging with shareholders throughout the approval process and appreciates the ongoing support from its investors.

To view the Indicative Timetable, please visit:
https://abnnewswire.net/lnk/DK6T5Z7Q



About Altech Batteries Ltd:

Altech Batteries Limited (ASX:ATC) (FRA:A3Y) is a specialty battery technology company that has a joint venture agreement with world leading German battery institute Fraunhofer IKTS ("Fraunhofer") to commercialise the revolutionary CERENERGY(R) Sodium Alumina Solid State (SAS) Battery. CERENERGY(R) batteries are the game-changing alternative to lithium-ion batteries. CERENERGY(R) batteries are fire and explosion-proof; have a life span of more than 15 years and operate in extreme cold and desert climates. The battery technology uses table salt and is lithium-free; cobalt-free; graphite-free; and copper-free, eliminating exposure to critical metal price rises and supply chain concerns.

The joint venture is commercialising its CERENERGY(R) battery, with plans to construct a 100MWh production facility on Altech's land in Saxony, Germany. The facility intends to produce CERENERGY(R) battery modules to provide grid storage solutions to the market.



Source:
Altech Batteries Ltd



Contact:
Corporate
Iggy Tan
Managing Director
Altech Batteries Limited
Tel: +61-8-6168-1555
Email: info@altechgroup.com

Martin Stein
Chief Financial Officer
Altech Batteries Limited
Tel: +61-8-6168-1555
Email: info@altechgroup.com

News Provided by ABN Newswire via QuoteMedia

ATC:AU
Altech Batteries

Altech Batteries Investor Kit

  • Corporate info
  • Insights
  • Growth strategies
  • Upcoming projects

GET YOUR FREE INVESTOR KIT

The Conversation (0)
Altech Batteries

Altech Batteries


Keep reading...Show less

Revolutionary sodium-chloride solid state batteries for renewable energy storage and silicon in graphite anodes for higher energy density batteries.

Altech Batteries Ltd  Annual Report to Shareholders

Altech Batteries Ltd Annual Report to Shareholders

Perth, Australia (ABN Newswire) - Altech Batteries Ltd (ASX:ATC,OTC:ALTHF) (FRA:A3Y) (OTCMKTS:ALTHF) is a specialty battery technology company that has a joint venture agreement with world leading German battery institute Fraunhofer IKTS ("IKTS") to commercialise the revolutionary CERENERGY Sodium Chloride Solid State (SCSS) Battery. CERENERGY batteries are the game-changing alternative to lithium-ion batteries. CERENERGY batteries are fire and explosion-proof; have a life span of more than 15 years and operate in extreme cold and desert climates. The battery technology uses table salt and is lithium-free; cobalt-free; graphite-free; and copper-free, eliminating exposure to critical metal price rises and supply chain concerns.

The joint venture is commercialising its CERENERGY battery, with plans to construct a 120MWh production facility on Altech's land in Saxony, Germany. The facility intends to produce CERENERGY battery modules to provide grid storage solutions to the market.

Altech has executed sales offtake Letters of Intent with three companies that covers the full first five years of production from the 120MWh production facility. Altech is now forging forward with securing the finance to construct the production facility, envisaged to be a combination of debt, equity from the sale of a minority interest in the project, and grants and subsidies.

The CERENERGY battery has achieved the highest possible dark green rating from Standard & Poors, due to its non-reliance on critical minerals as well as its expected 50% less greenhouse gas emissions to lithium-ion battery technology.

Altech has licenced its proprietary high purity alumina coating technology to 75% owned subsidiary Altech Industries Germany GmbH (AIG), which has finalised a Definitive Feasibility Study for the development of a 8,000tpa silicon/graphite alumina coating plant in the state of Saxony, Germany to supply its Silumina Anodes product to the burgeoning European electric vehicle market.

The Company patented its game changing technology of incorporating high-capacity silicon into lithium-ion batteries. Through in house R&D, the Company has cracked the "silicon code" and successfully achieved a 55% higher energy battery with improved cyclability or battery life. Higher density batteries result in smaller, lighter batteries and substantially less greenhouse gases, and is the future for the EV market. The Company's proprietary silicon graphite product is registered as Silumina Anodes.

The Company is in the race to get its patented technology to market, has finalised the construction of a Silumina Anodes pilot plant at AIG's industrial site within the Schwarze Pumpe Industrial Park in Saxony, Germany. The European silicon feedstock supply partner for this plant will be Ferroglobe. The project has also received green accreditation from the independent Norwegian Centre of International Climate and Environmental Research (CICERO). The pilot plant adjacent to the proposed project site will allow the qualification process for its Silumina Anodes product. AIG has executed NDAs with German and American automakers as well as a European based battery company.

The pilot plant to produce commercial samples of the product has now been completed and is operational. Altech is working to ramp up production of the pilot plant in order to provide the commercial samples to the prospective companies for their independent testing within their product range.

*To view the full Annual Report, please visit:
https://abnnewswire.net/lnk/35XEX5O2



About Altech Batteries Ltd:

Altech Batteries Limited (ASX:ATC,OTC:ALTHF) (FRA:A3Y) is a specialty battery technology company that has a joint venture agreement with world leading German battery institute Fraunhofer IKTS ("Fraunhofer") to commercialise the revolutionary CERENERGY(R) Sodium Alumina Solid State (SAS) Battery. CERENERGY(R) batteries are the game-changing alternative to lithium-ion batteries. CERENERGY(R) batteries are fire and explosion-proof; have a life span of more than 15 years and operate in extreme cold and desert climates. The battery technology uses table salt and is lithium-free; cobalt-free; graphite-free; and copper-free, eliminating exposure to critical metal price rises and supply chain concerns.

The joint venture is commercialising its CERENERGY(R) battery, with plans to construct a 100MWh production facility on Altech's land in Saxony, Germany. The facility intends to produce CERENERGY(R) battery modules to provide grid storage solutions to the market.

News Provided by ABN Newswire via QuoteMedia

Keep reading...Show less
ALTECH - CERENERGY Battery Prototype Reaches Key Milestones

ALTECH - CERENERGY Battery Prototype Reaches Key Milestones

Altech Batteries (ATC:AU) has announced ALTECH - CERENERGY Battery Prototype Reaches Key Milestones

Download the PDF here.

Altech Batteries Ltd  CERENERGY Battery Prototype Reaches Key Milestones

Altech Batteries Ltd CERENERGY Battery Prototype Reaches Key Milestones

Perth, Australia (ABN Newswire) - Altech Batteries Limited (ASX:ATC,OTC:ALTHF) (FRA:A3Y) (OTCMKTS:ALTHF) is pleased to announce the latest performance results of the CERENERGY(R) cell and battery pack prototypes. These results confirm the technological maturity and robustness of the CERENERGY(R) technology and mark another decisive step towards industrialisation.

Highlights

- 650+ cycles with no capacity loss, proving exceptional material stability and long operational lifespan compared to conventional batteries

- Near 100% Coulombic efficiency, confirming minimal side reactions and strong intrinsic safety of sodium nickel chloride chemistry

- High energy efficiency of up to 92%, surpassing typical 70-80% levels of competing battery technologies

- Proven safety under extreme conditions - cells remained stable during overcharge, deep discharge, and thermal cycling up to 300 degC with no gassing, leakage, or rupture

- Robust and reliable chemistry - sodium nickel chloride avoids flammable electrolytes and runaway risks, confirming suitability for safe, large-scale grid and renewable energy storage

- ABS60 prototype validated under real-world conditions -tested across diverse load profiles, high-current pulses up to 50 A, and thermal variations

- Stable, efficient performance - achieved ~88% round-trip efficiency with no observable capacity fade over 110+ cycles

CELL PERFORMANCE

The CERENERGY(R) prototype cells have successfully completed over 650 charge-discharge cycles without any detectable capacity loss. Cycle life is a critical measure of battery durability, as most conventional batteries experience gradual degradation with every cycle. Achieving such performance highlights the outstanding stability of the materials and points to the potential for a long operational lifespan.

For stationary energy storage systems (ESS), this translates into fewer battery replacements, lower lifetime operating costs, and greater reliability for end users.

The cells also delivered nearly 100% Coulombic efficiency alongside an energy efficiency of up to 92% across 650 cycles. Coulombic efficiency reflects the proportion of charge recovered during discharge relative to what was supplied during charging. A value approaching 100% indicates minimal side reactions or parasitic losses, confirming the intrinsic stability and safety of sodium nickel chloride chemistry. This high efficiency demonstrates that the cells are not expending energy on unwanted processes such as electrode degradation. Such performance is vital for scalability, ensuring reliable, longterm operation in commercial energy storage applications.

Energy efficiency represents the proportion of energy delivered relative to the energy supplied. Competing technologies, including conventional high-temperature batteries and many flow batteries, typically achieve only around 70-80%. By reaching 92%, CERENERGY(R) positions itself in a highly competitive class, offering more cost-effective energy storage, stronger economics for grid operators, and seamless compatibility with the requirements of renewable energy integration.

The cells achieved a nominal capacity of 100 Ah and 250 Wh, with reliable performance even at higher discharge rates. A key feature is their ability to support multiple daily charge-discharge cycles within the 20-80% state of charge (SoC) range at 25 A. This capability positions CERENERGY(R) as a highly flexible solution for grid operators and energy storage providers, enabling cost-efficient, long-life performance in applications that demand frequent cycling such as renewable integration, peak shaving, and backup power.

CERENERGY(R) prototype cells underwent rigorous abuse testing, including overcharge to 4 V, deep discharge to 0.2 V, and thermal cycling between room temperature and 300 degC. In all cases, the cells remained stable with no gassing, leakage, or rupture -clear proof of their outstanding safety. These results highlight the intrinsic stability of sodium nickel chloride chemistry, which avoids the flammable electrolytes and runaway risks common in lithium-ion batteries. The ability to withstand extreme electrical and thermal stress demonstrates CERENERGY(R)'s robustness and confirms its suitability for safe, largescale deployment in grid, renewable, and industrial energy storage applications. This was achieved over 3 cycles with 1.8 Full Charge Equivalent (FCE) into 22 hours.

BATTERY PACK ABS60 (60 kWh) PROTOTYPE

The first ABS60 battery pack prototype has been successfully validated under real-world operating conditions, marking a major step forward in product readiness. Testing included diverse load profiles,

continuous discharges at 25 A (equivalent to C-rate of C/4 (discharges in 4 hours), or one-quarter of the pack's rated capacity per hour) at 80% depth of discharge (DoD), short-duration high-current pulses up to 50 A, and carefully controlled thermal variations.

The pack consistently demonstrated stable performance, achieving ~88% round-trip efficiency while maintaining reliable thermal management. Efficiency refers to the proportion of input energy that can be retrieved during operation-a critical measure of economic viability for large-scale storage. Over more than 110 cycles, results showed no observable capacity fading and only a slight increase in internal resistance. Capacity fading refers to the gradual decline in usable energy over repeated cycles, while internal resistance influences power delivery and heat generation.

The absence of meaningful degradation confirms the durability and electrochemical stability of the ABS60 design. These outcomes are highly significant as they demonstrate that the pack can withstand real-world duty cycles while retaining performance and efficiency, translating into longer service life, fewer replacements, and lower total cost of ownership.

For grid operators and renewable integration projects, this combination of robust cycling capability, efficiency, and thermal stability underscores the ABS60's commercial readiness and competitive advantage in the stationary energy storage market.

These results are a strong confirmation of CERENERGY(R)'s technological leadership and a clear signal of the technology's competitiveness and robustness for future applications in energy storage and industrial markets.

Group Managing Director, Iggy Tan said "These results confirm CERENERGY(R)'s robustness and readiness for market adoption. Demonstrating long cycle life, high efficiency, and unmatched safety, we are now strongly positioned to deliver a competitive and sustainable alternative for grid and industrial energy storage."

*To view photographs, tables and figures, please visit:
https://abnnewswire.net/lnk/17QS44T3



About Altech Batteries Ltd:

Altech Batteries Limited (ASX:ATC,OTC:ALTHF) (FRA:A3Y) is a specialty battery technology company that has a joint venture agreement with world leading German battery institute Fraunhofer IKTS ("Fraunhofer") to commercialise the revolutionary CERENERGY(R) Sodium Alumina Solid State (SAS) Battery. CERENERGY(R) batteries are the game-changing alternative to lithium-ion batteries. CERENERGY(R) batteries are fire and explosion-proof; have a life span of more than 15 years and operate in extreme cold and desert climates. The battery technology uses table salt and is lithium-free; cobalt-free; graphite-free; and copper-free, eliminating exposure to critical metal price rises and supply chain concerns.

The joint venture is commercialising its CERENERGY(R) battery, with plans to construct a 100MWh production facility on Altech's land in Saxony, Germany. The facility intends to produce CERENERGY(R) battery modules to provide grid storage solutions to the market.

News Provided by ABN Newswire via QuoteMedia

Keep reading...Show less
Altech Batteries Ltd  Bearer Bond Funds Received

Altech Batteries Ltd Bearer Bond Funds Received

Perth, Australia (ABN Newswire) - Altech Batteries Limited (ASX:ATC,OTC:ALTHF) (FRA:A3Y) (OTCMKTS:ALTHF) is pleased to announce that it has received EUR1M in funds from the remaining Bearer Bond facility in place with major shareholder Deutsche Balaton. The original facility was for EUR2.5M and this has now been adjusted by mutual agreement to EUR2M. The full EUR2M has now been drawn down.

As announced to the ASX on 25 March 2025, the Company advised that it is in the process of selling its Malaysian land to help fund the ongoing development of the CERENERGY(R) battery project and the Silumina Anodes(TM) battery materials project, as well as to support general working capital requirements.

The Company also announced that it had entered into a binding Bond Note Subscription Deed with its major shareholder Deutsche Balaton AG, under which Altech could drawdown up to EUR2.5M in cash in the form of interest-bearing Bearer Bonds.

As the Bond Note Subscription Deed involved the Company granting a security interest over the Company's Malaysian land, shareholder approval was required. The Company convened a General Meeting on 13 May 2025 and shareholders approved all Resolutions put to the General Meeting. The Company then applied to have the Malaysian land security registered with the relevant land authority, being Johor Corp. Although there were no laws or regulations precluding Johor Corp from registering the land security, it considered Deutsche Balaton AG a 'non-lending foreign entity' and advised that accordingly it was not comfortable in registering the land security.

The Company's wholly owned subsidiary Altech Chemicals Sdn. Bhd. is the holder of the lease agreement over the Malaysian land. The only asset of value within Altech Chemicals Sdn. Bhd. is the lease agreement over the Malaysian land. In order to provide the security to Deutsche Balaton AG so as to drawdown the Bearer Bonds, the Company enforced security over the shares of Altech Chemicals Sdn. Bhd. in favour of Deutsche Balaton AG in lieu of the land security.

On 20 August 2025, the Company's wholly owned subsidiary Altech Chemicals Australia Pty Ltd (shareholder of Altech Chemicals Sdn. Bhd.) executed a Share Charge with Deutsche Balaton AG in connection with the Bond Note Subscription Deed. Pursuant to the Share Charge, Altech Chemicals Australia Pty Ltd has offered as a continuing Security for the due and punctual payment of all the requirements of the Bond Note Subscription Deed, charged all its rights, title and interest to all of the shares held in Altech Chemicals Sdn. Bhd. in favour of Deutsche Balaton AG. The Security is a continuing security and will extend to the ultimate balance of the due and punctual payment of all the requirements of the Bond Note Subscription Deed.

On 20 August 2025, the Company executed an Amendment Deed to the Bond Note Subscription Deed. Under the terms of the Amendment Deed, the agreed amount of bonds available to be drawdown was reduced from EUR2.5M to EUR2.0M. Additionally, the Company's Meckering land was offered as additional security for the due and punctual payment of all the requirements of the Bond Note Subscription Deed.

Altech Meckering Pty Ltd, the Company's wholly owned subsidiary and holder of the Meckering land, has entered into a mortgage over the Meckering Land in favour of Deutsche Balaton AG as a continuing Security for the due and punctual payment of all the requirements of the Bond Note Subscription Deed.



About Altech Batteries Ltd:

Altech Batteries Limited (ASX:ATC,OTC:ALTHF) (FRA:A3Y) is a specialty battery technology company that has a joint venture agreement with world leading German battery institute Fraunhofer IKTS ("Fraunhofer") to commercialise the revolutionary CERENERGY(R) Sodium Alumina Solid State (SAS) Battery. CERENERGY(R) batteries are the game-changing alternative to lithium-ion batteries. CERENERGY(R) batteries are fire and explosion-proof; have a life span of more than 15 years and operate in extreme cold and desert climates. The battery technology uses table salt and is lithium-free; cobalt-free; graphite-free; and copper-free, eliminating exposure to critical metal price rises and supply chain concerns.

The joint venture is commercialising its CERENERGY(R) battery, with plans to construct a 100MWh production facility on Altech's land in Saxony, Germany. The facility intends to produce CERENERGY(R) battery modules to provide grid storage solutions to the market.

News Provided by ABN Newswire via QuoteMedia

Keep reading...Show less
Recyclico Battery Materials (TSXV:AMY)

RecycLiCo’s U.S. Subsidiary and Alaska Energy Metals Corporation Enter Memorandum of Understanding to Advance Goal of Creating Domestic Critical Metal Supply Chain

RecycLiCo Battery Materials Inc. (“RecycLiCo”) (TSX.V: AMY | OTCQB: AMYZF | FSE: ID4), a critical mineral refining and lithium-ion battery upcycling company, and Alaska Energy Metals Corp. (“AEMC”) (TSX.V: AEMC | OTCQB: AKEMF | FRA: V7F) are pleased to announce that RecycLiCo’s new wholly owned U.S. subsidiary, RecycLiCo US Mineral Recovery, Inc. (“RUMR”) and AEMC have entered into a Memorandum of Understanding (“MOU”), effective September 16, 2025, to assess the ways in which RecycLiCo’s hydrometallurgical processing technology could be used in the refining of metal concentrates derived from AEMC’s polymetallic Nikolai deposit in Alaska. The Nikolai deposit contains seven U.S. Government-designated Critical Minerals, including nickel, cobalt, copper, chromium, platinum, palladium, and gold (along with the non-critical mainstay metal iron).

Keep reading...Show less
SAGA Metals Expands Radar Ti-V-Fe Project Vision with Preliminary Metallurgical Insights and Major Exploration Milestones

SAGA Metals Expands Radar Ti-V-Fe Project Vision with Preliminary Metallurgical Insights and Major Exploration Milestones

Saga Metals Corp. ("SAGA" or the "Company") (TSXV: SAGA,OTC:SAGMF) (OTCQB: SAGMF) (FSE: 20H) a North American exploration company focused on critical mineral discovery, is pleased to report dual advancements in its 2025 program: the completion of a detailed mineralogical and geological study prepared by Dr. Al Miller, that sets the stage for comprehensive metallurgical testing, and significant on-site exploration progress at the 100% owned Radar Titanium-Vanadium-Iron (Ti-V-Fe) Project near Cartwright, Labrador. Together, these developments underscore Radar's potential as a strategic critical metals project in North America.

Radar Ti-V-Fe Project in Labrador, Canada:

News Provided by GlobeNewswire via QuoteMedia

Keep reading...Show less
A.I.S. Resources Signs Earn-In Agreement with Riversgold on the New Copper/Gold/Antimony Discovery at Saint John, New Brunswick

A.I.S. Resources Signs Earn-In Agreement with Riversgold on the New Copper/Gold/Antimony Discovery at Saint John, New Brunswick

A.I.S. Resources Limited (TSXV: AIS,OTC:AISSF, OTC-Pink: AISSF) ("AIS" or the "Company") is pleased to announce that it has entered into an earn-in agreement with Riversgold Ltd. (ASX: RGL) ("Riversgold"), granting AIS the right to acquire up to a 75% interest in the new Saint John IOCGPorphyry Project located in New Brunswick, Canada.

AIS CEO Marc Enright-Morin commented, "We are excited to partner with Riversgold on this very exciting newly discovered Saint John Project. The combination of very high-grade mineralisation, excellent infrastructure, and district-scale potential provides AIS with a unique opportunity to advance a possible IOCG/porphyry system in one of Canada's most mining-friendly jurisdictions. Saint John is exploration and drill ready with two drill programs already approved. Its unique location near the coast means we can explore here in a meaningful way all year round and we look forward to getting the drills turning and come up with the discovery hole."

News Provided by GlobeNewswire via QuoteMedia

Keep reading...Show less
Altech Batteries

Altech Batteries Investor Kit

  • Corporate info
  • Insights
  • Growth strategies
  • Upcoming projects

GET YOUR FREE INVESTOR KIT

Latest Press Releases

Related News