The Conversation (0)
True North Copper (ASX:TNC)) is a responsible explorer, developer and producer of critical minerals focusing on copper and cobalt. The company's most significant projects Mt Oxide and Cloncurry are located within the Mt Isa Inlier region, home to several world-class critical minerals projects.
TNC has global measured, indicated and inferred resources containing 336,200 tonnes copper, 21,890 tonnes cobalt, 88,000 oz gold, 4.31 million ounces (Moz) silver. It is trading on the Australian Stock Exchange in mid-June 2023, following a reverse takeover merger with exploration company Duke Exploration in February 2023.
Visual representation of Mt Oxide Project and Cloncurry Project tenements and resources summaryThe Mt Oxide and Cloncurry Projects benefit from low capex, and low-cost production. Mt Oxide Project is a highly prospective and underexplored asset, featuring significantly sized, high-grade copper with cobalt and silver mineralisation.
Company Highlights
- Tier 1 jurisdiction, Queensland-based copper and cobalt exploration and development company with a global measured, indicated and inferred resource containing: 336.2 kt copper, 21.89 kt cobalt, 88 koz gold, 4.31 Moz silver. Key projects located within Australia's Mt Isa Inlier region, home to some of the country's most well-known mining projects.
- Mt Oxide and Cloncurry Projects benefit from low capex, low-cost production.
- Cloncurry Project - producing copper sulphate, with a projected production of 10,000 to 15,000 tonnes per annum over a 10-year mine life. Exclusive offtake agreement for all Cloncurry-produced copper sulphate with Kanins International. Prices set at LME rate plus a premium.
- Mining restart studies for the Great Australia Mine finalised - Q3 2023. Mining recommencement decision - Q4 2023.
- Great Australia Mine drilling and exploration program - extended structurally controlled, down-dip feeder to mineralisation located beneath the GAM Pit, with notable intersections of copper mineralisation. IP survey conducted over the Greater Australian Target identified four high-order IP chargeability anomalies, with compelling targets for future drill testing.
- Mt Oxide Project’s Vero Resource contains 15.98 Mt at 1.43 percent copper and 6.91 g/t silver combined measured, indicated and inferred resource, and a separate 9.15 Mt at .23 percent cobalt total combined measured, indicated and inferred resource.
- First hole of an initial diamond drilling program at Vero Resource intersected 66.5 meters at 4.95 percent copper. Assay results returning throughout Q3 2023.
- Strong ESG focus across all operational elements including:
- Hitachi Vantara partnership to improve transparency and data capture while realising business savings through artificial intelligence.
- Leveraging the Queensland government's Powerlink-led CopperString 2032 project, which is situated less than 5 kilometres from the Cloncurry project. Rehabilitated TNC mining landforms are being transformed into renewable solar energy sources and will feed into the CopperString network.
This True North Copper profile is part of a paid investor education campaign.*
Click here to connect with True North Copper (ASX:TNC) to receive an Investor Presentation
TNC:AU
Empire Metals Limited Announces Team Expansion & Bulk Met Testing Commences
Highlights
- Strategic Appointments to Accelerate Development
Empire has appointed Mr. Alan Rubio as Study Manager and Mr. Pocholo Aviso as Hydro-metallurgist. These appointments are aligned with the Company's objective to evaluate mining scenarios, optimise product development, assess commercial process flowsheet options and progress the Project toward a feasibility study. - Mr. Alan Rubio, an engineer and seasoned Study and Project Manager with over 28 years' experience working within the resources sector developing and evaluating mining projects, will lead the assessment of mining, infrastructure and oversee key economic studies to deliver a robust project development plan.
- Mr. Pocholo Aviso, an experienced hydro-metallurgist with a background in the TiO₂ pigment industry (including roles at Tronox and BHP's Kwinana Nickel Refinery), will manage the titanium product development programme, focusing on product optimisation, process flowsheet designs and evaluating market pathways.
- Partnership with Strategic Metallurgy Pty Ltd:
Empire has also partnered with Strategic Metallurgy, a highly respected, Perth-based metallurgical consultancy. The firm will provide oversight of the metallurgical testwork programme and technical guidance to the Company's internal metallurgists and process design engineers, helping transition from bench-scale process development to pilot-scale testing.
- Bulk-Scale Testwork:
The Company has commenced bulk metallurgical testwork that will produce significant quantities of mineral concentrate to support large-scale beneficiation testing and, for the first time, enable the supply of bulk product samples to prospective end users. In addition, this testwork will provide critical technical information for the development of a commercial process flowsheet.
These key appointments advance the Company toward confirming project economics and assessing mine design, process flowsheets and product options-critical steps in the development pathway to commercial mine production.
Commenting on the announcement, Shaun Bunn, Managing Director, said:
"I am delighted to welcome Alan and Pocholo to our team. Their technical expertise will be invaluable as we move toward defining the economic potential and product strategy for Pitfield. Building a strong in-house team has been key to our progress so far, and these appointments mark an important next step.
"We are also very pleased to be working with Strategic Metallurgy, whose reputation and experience in process development will significantly strengthen our metallurgical programme. The timing is ideal, with large-scale metallurgical testing now underway, including ore scrubbing and spiral gravity separation, using bulk samples collected earlier this year."
Process Development Update
A large-scale metallurgical testwork programme, involving mineral separation techniques that require bulk feed samples, between approximately 0.5 to 1.5 tonnes each, has commenced using the material collected from the February 2025 Air Core drilling. The programme includes ore scrubbing, desliming and gravity spiral testwork. Alternative gravity separation unit processes, such as jigs and up-current classifiers, are also being evaluated.
Flotation testwork is also being carried out on the fines fraction, separated in the desliming step. As part of this programme, bulk mineral concentrates will be produced for downstream processing, testing both hydrometallurgical and product finishing flowsheet concepts. This will allow a consistent, common mineral concentrate stream to be assessed across the range of flowsheet options that are being considered downstream of the mineral separation step.
Figure 1. Photos of bulk testwork programme showing clockwise from bottom left: deslimed feed sample, wet scrubber unit, and gravity spirals .
This bulk testwork programme will produce significant volumes of concentrates which will feed into beneficiation testwork and result in larger product samples which can be delivered to potential end users for assessment for the first time.
In addition, this programme is designed to assess different types of process equipment and analyse a variety of flowsheet options, resulting in technical information necessary for developing a commercial process flowsheet.
About Strategic Metallurgy
Strategic Metallurgy Pty Ltd, established in 2010, is a metallurgical consulting company whose business model is to work with mining companies to develop their metallurgical strategy and ensure that it fits into their overall business plan. With a proven track record of providing expert consulting, process development, testwork management, feasibilities and strategic reviews Strategic Metallurgy has the extensive hands-on experience that Empire requires to progress the Pitfield Project through the metallurgical testing, process modelling, flowsheet design stages to pilot plant design and operation.
The Pitfield Titanium Project
Located within the Mid-West region of Western Australia, near the northern wheatbelt town of Three Springs, the Pitfield titanium project lies 313km north of Perth and 156km southeast of Geraldton, the Mid West region's capital and major port. Western Australia is ranked as one of the top mining jurisdictions in the world according to the Fraser Institute's Investment Attractiveness Index published in 2023, and has mining-friendly policies, stable government, transparency, and advanced technology expertise. Pitfield has existing connections to port (both road & rail), HV power substations, and is nearby to natural gas pipelines (refer Figure 2).
Figure 2. Pitfield Project Location showing the Mid-West Region Infrastructure and Services.
Competent Person Statement
The scientific and technical information in this report that relates to process metallurgy is based on information reviewed by Ms Narelle Marriott, an employee of Empire Metals Australia Pty Ltd, a wholly owned subsidiary of Empire. Ms Marriott is a member of the AusIMM and has sufficient experience relevant to the style of mineralisation and type of deposit under consideration and to the activity being undertaken to qualify as a Competent Person as defined in the JORC Code 2012. Ms. Marriott consents to the inclusion in this announcement of the matters based on their information in the form and context in which it appears.
The technical information in this report that relates to the geology and exploration of the Pitfield Project has been compiled by Mr Andrew Faragher, an employee of Empire Metals Australia Pty Ltd, a wholly owned subsidiary of Empire. Mr. Faragher is a member of the AusIMM and has sufficient experience that is relevant to the style of mineralisation and type of deposit under consideration and to the activity being undertaken to qualify as a Competent Person as defined in the JORC Code 2012. Mr Faragher consents to the inclusion in this release of the matters based on his information in the form and context in which it appears.
Market Abuse Regulation (MAR) Disclosure
Certain information contained in this announcement would have been deemed inside information for the purposes of Article 7 of Regulation (EU) No 596/2014, as incorporated into UK law by the European Union (Withdrawal) Act 2018, until the release of this announcement.
**ENDS**
For further information please visit www.empiremetals.co.uk or contact:
About Empire Metals Limited
Empire Metals is an AIM-listed and OTCQB-traded exploration and resource development company (LON:EEE)(OTCQB:EPMLF) with a primary focus on developing Pitfield, an emerging giant titanium project in Western Australia.
The high-grade titanium discovery at Pitfield is of unprecedented scale, with airborne surveys identifying a massive, coincident gravity and magnetics anomaly extending over 40km by 8km by 5km deep. Drill results have indicated excellent continuity in grades and consistency of the in-situ mineralised beds and confirm that the sandstone beds hold the higher-grade titanium dioxide (TiO₂) values within the interbedded succession of sandstones, siltstones and conglomerates. The Company is focused on two key prospects (Cosgrove and Thomas), which have been identified as having thick, high-grade, near-surface, in-situ bedded TiO₂ mineralisation, each being over 7km in strike length.
An Exploration Target* for Pitfield was declared in 2024, covering the Thomas and Cosgrove mineral prospects, and was estimated to contain between 26.4 to 32.2 billion tonnes with a grade range of 4.5 to 5.5% TiO2. Included within the total Exploration Target* is a subset that covers the in-situ weathered sandstone zone, which extends from surface to an average vertical depth of 30m to 40m and is estimated to contain between 4.0 to 4.9 billion tonnes with a grade range of 4.8 to 5.9% TiO2.
The Exploration Target* covers an area less than 20% of the overall mineral system at Pitfield which demonstrates the potential for significant further upside.
Empire is now accelerating the economic development of Pitfield, with a vision to produce a high-value titanium metal or pigment quality product at Pitfield, to realise the full value potential of this exceptional deposit.
The Company also has two further exploration projects in Australia; the Eclipse Project and the Walton Project in Western Australia, in addition to three precious metals projects located in a historically high-grade gold producing region of Austria.
*The potential quantity and grade of the Exploration Target is conceptual in nature. There has been insufficient exploration to estimate a Mineral Resource and it is uncertain if further exploration will result in the estimation of a Mineral Resource. See RNS dated 12 June 2024 for full details.
This information is provided by RNS, the news service of the London Stock Exchange. RNS is approved by the Financial Conduct Authority to act as a Primary Information Provider in the United Kingdom. Terms and conditions relating to the use and distribution of this information may apply. For further information, please contact rns@lseg.com or visit www.rns.com.
Click here to connect with Empire Metals (OTCQB:EPMLF, AIM:EEE) to receive an Investor Presentation
Nobel Resources Announces Additional Results at the Cuprita Project, Atacama Region, Chile
Nobel Resources Corp. (TSX – V: NBLC) (the “Company” or “Nobel”) is pleased to provide an update on its ongoing exploration at the Cuprita Project (the “Project” or “Cuprita”) in Atacama Region, Chile. Following the recent identification by Nobel geologists of a leach cap with characteristics strongly associated with porphyry copper-(gold) deposits in the region at Cuprita, including associated highly anomalous copper in soils and bedrock, the Company has additionally confirmed:
- the existence of an IP chargeability and resistivity anomaly typical of porphyry copper deposits in the region; and
- the presence of highly anomalous copper chip samples from outcrops associated with the leach cap.
The geological features being identified by Nobel field work at Cuprita demonstrates the Project is highly prospective.
According to Vern Arseneau, COO of Nobel, “After only a few short weeks in the field, Nobel Geologists have identified key characteristics of a shallow mineralized porphyry system at Cuprita. The leach cap, IP anomaly, significant copper bearing rock chips and the copper in soil anomaly are all located adjacent to a ground magnetic low. These traits are situated near the intersection of a major north-northeast striking fault structure with numerous northwest striking quartz veins with copper oxides. Intersecting major faults is a common, if not essential, structural control for the emplacement of copper-gold porphyries in the region (Figure 3). This is essentially the complete suite of important indicators used when identifying productive porphyry copper systems, combined with a leach cap in one of the most important porphyry copper belts globally indicate excellent potential for a mineralized porphyry deposit at the Cuprita project.”
The IP survey was carried out by Argali Geophysical SA during November 2018 and consisted of three E-W lines across the area of the recently identified leach cap. Survey parameters were 100m spaced dipoles with an estimated depth penetration of 700m at N=27. The top of the IP anomaly, based on this data, is estimated to be approximately 200meters below surface. (Figure 3; line 7055700N). All three lines exhibit a similar chargeability/resistivity response and the anomaly remains open to the North and South.
The chargeability anomalies from 7 to 9 mV/V are in line with many of the porphyry copper deposits near Inca de Oro which are notoriously low in pyrite and therefore in chargeability. Chargeability of less than 10 mV/V has been observed at many deposits local to Cuprita. Similarly, field observations by Nobel geologists have also confirmed the general lack of pyrite in altered rocks at Cuprita.
Rock chip sampling of mineralized structures associated with the leach cap, anomalous soil samples and the ground magnetic anomalies returned highly anomalous copper values ranging from 0.25 to 3.46% Cu. Many of the rock samples contain remnant copper sulfides, such as Chalcocite, Chalcopyrite and locally Bornite (Figure 1). Additionally, a sample taken 500m to the northeast, where QZ vein stockwork with disseminated chrysocolla outcrops with a grade of 2.06% Cu (Figure 2) signifying the potential for a large extensive system.
Figure 1: Rock sample with Chalcopyrite and Bornite grading 1.36% copper associated with the leach cap.
Figure 2: Sample of copper-rich stockwork of quartz and chrysocolla grading 2.06% copper from 500 meters northeast of previous sample.
According to Larry Guy, CEO, “Nobel geologists believe that this newly identified geological / geochemical evidence along with the geophysical compilation points to potential for a large mineralized porphyry at shallow depth covering the area between the anomalous soil results to the South and extending more than 2 kilometers North to the previously reported ground magnetic lows. (Figures 3 and 4; map and cross section and Figure 5 conceptual geological model).
Geologically, Cuprita is part of the Metallogenic Paleocene Porphyry Copper Belt that hosts several major porphyry copper deposits, such as El Salvador, Cerro Colorado, Spence, Sierra Gorda, Fortuna, as well as several gold deposits. Recent field work at Cuprita has focused the targeting for forthcoming drill programs.
Figure 3: Compilation map showing the location of the extensive leached cap (lithocap) and associated structures, outcrop samples, quartz-copper veins, soil geochemical anomalies, tourmaline breccias associated with a magnetic low, that comprise the key criteria for a mineralized porphyry target.
Figure 4. Schematic Section showing the Conceptual Model of the Porphyry in Cuprita.
Figure 5. Conceptual model for the Cuprita porphyry target (modified after Halley et al., 2015) The key geological components for the classic mineralized Andean porphyry model have been identified at the Cuprita target.
Qualified Person
The scientific and technical information in this news release has been reviewed and approved by Mr. David Gower, P.Geo., as defined by National Instrument 43-101 of the Canadian Securities Administrators. Mr. Gower is a consultant of Nobel and is not considered independent of the Company.
About Nobel
Nobel Resources is a Canadian resource company focused on identifying and developing prospective mineral projects. The Company has a team with a strong background of exploration success.
For further information, please contact:
Lawrence Guy
Chairman and Chief Executive Officer
+1 647-276-0533
Vincent Chen
Investor Relations
vchen@nobel-resources.com
www.nobel-resources.com
Cautionary Note Regarding Forward-looking Information
This press release contains “forward-looking information” within the meaning of applicable Canadian securities legislation. Forward-looking information includes, without limitation, the mineralization and prospectivity of the Project, the Company’s ability to explore and develop the Project, the Company’s ability to obtain adequate financing and the Company’s future plans. Generally, forward-looking information can be identified by the use of forward-looking terminology such as “plans”, “expects” or “does not expect”, “is expected”, “budget”, “scheduled”, “estimates”, “forecasts”, “intends”, “anticipates” or “does not anticipate”, or “believes”, or variations of such words and phrases or state that certain actions, events or results “may”, “could”, “would”, “might” or “will be taken”, “occur” or “be achieved”. Forward- looking information is subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of Nobel, as the case may be, to be materially different from those expressed or implied by such forward-looking information, including but not limited to: general business, economic, competitive, geopolitical and social uncertainties; the actual results of current exploration activities; risks associated with operation in foreign jurisdictions; ability to successfully integrate the purchased properties; foreign operations risks; and other risks inherent in the mining industry. Although Nobel has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking information. Nobel does not undertake to update any forward-looking information, except in accordance with applicable securities laws.
NEITHER TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS RELEASE.
Photos accompanying this announcement are available at
https://www.globenewswire.com/NewsRoom/AttachmentNg/62309a33-4664-4149-92df-4891438fdf87
https://www.globenewswire.com/NewsRoom/AttachmentNg/63eb007a-2863-4dc7-99d8-f47d66583ae8
https://www.globenewswire.com/NewsRoom/AttachmentNg/3f84beb6-2d48-41e4-b0b0-6dca5442321a
https://www.globenewswire.com/NewsRoom/AttachmentNg/b512640a-ae96-4730-9d81-c3ea1ee96e90
https://www.globenewswire.com/NewsRoom/AttachmentNg/066dd95f-6cec-4cdb-ba39-f44238b70ac1
Empire Metals Limited Announces Completion of MRE Drilling Campaign
- 180 drill holes completed at the Thomas prospect, comprising:
- 140 Air Core ('AC') drill holes for a total of 6,360 metres;
- 40 Reverse Circulation ('RC') drill holes for a total of 3,776 metres;
- Total metres drilled: 10,136
- Drilling was conducted on a systematic 400m by 200m grid covering over 1,352 hectares and was designed to support the initial MRE as well as providing key data for economic evaluation studies.
- The Thomas Prospect was selected as the basis for the maiden MRE due to the extensive, thick and high-grade titanium mineralisation hosted within the broad, in-situ weathered zone.
- This campaign marks a major milestone in the development of Pitfield, laying the foundation for a globally significant MRE and enabling the identification of near-surface, high grade zones to support the development of mine planning and ore scheduling as part of upcoming economic evaluation studies.
Shaun Bunn, Managing Director, said: "We are very pleased to have completed this important drilling campaign on time, on budget and without safety incident. With drilling now complete, our focus turns to resource modelling and progressing Pitfield towards its maiden Mineral Resource Estimate, which is a key milestone as we look to bring this globally significant titanium project to commercialisation, maintaining the ambitious development schedule we have delivered over the past two years."
MRE Drilling Programme
With the completion of the current drill campaign, the largest undertaken by the Company to date, total drilling at Pitfield has now surpassed 32,000m across 382 holes, providing a robust foundation for geological modelling, resource definition (refer Figure 1) and initial economic evaluation work.
Since commencing the maiden drilling campaign at Pitfield on 27 March 2023 Empire has completed 382 drill holes for a total 32,265 metres comprising:
- 17 Diamond drill holes for 2,704 m
- 140 RC drill holes for 18,764 m
- 225 AC drill holes for 10,797 m.
Figure 1. Grey-scale magnetics overlain by airborne gravity data showing RC, AC and diamond drillhole collar locations and JORC Exploration Target areas.
May-June 2025 Campaign
The location and spacing of the current RC and AC drillholes were designed, with the input of mineral resource consultants Snowden-Optiro, to provide the necessary drill assay data density to allow the preparation of an MRE at the Thomas Prospect.
The completed drill campaign consisted of 140 AC drillholes, on a 400 x 200m drillhole-spaced grid with an average forecast depth of 45.4m, for a total of 6,360 metres, and 40 RC drillholes within the AC drilling grid, to an average depth of 94.4m, for a total of 3,776 metres. The overall drillhole grid extends 5.2km by 2.6km and totals an area of 1,352 hectares (refer Figure 2).
Figure 2. RC and AC drill hole collar locations within the Thomas Prospect priority area.
During the campaign all drill holes were subsampled on a 2m interval, resulting in over 5,000 drill samples being collected, logged by our on-site team of geologists and then prepared for shipment to Intertek's Perth based analytical laboratory. As of the end of June all drill hole and QA/QC samples have been delivered to Intertek for geochemical analysis and assaying.
The Pitfield Titanium Project
Located within the Mid-West region of Western Australia, near the northern wheatbelt town of Three Springs, the Pitfield titanium project lies 313km north of Perth and 156km southeast of Geraldton, the Mid West region's capital and major port. Western Australia is ranked as one of the top mining jurisdictions in the world according to the Fraser Institute's Investment Attractiveness Index published in 2023, and has mining-friendly policies, stable government, transparency, and advanced technology expertise. Pitfield has existing connections to port (both road & rail), HV power substations, and is nearby to natural gas pipelines as well as a green energy hydrogen fuel hub, which is under planning and development (refer Figure 2).
Figure 2. Pitfield Project Location showing theMid-West Region Infrastructure and Services
Competent Person Statement
The technical information in this report that relates to the Pitfield Project has been compiled by Mr Andrew Faragher, an employee of Empire Metals Australia Pty Ltd, a wholly owned subsidiary of Empire. Mr Faragher is a Member of the Australian Institute of Mining and Metallurgy. Mr Faragher has sufficient experience that is relevant to the style of mineralisation and type of deposit under consideration and to the activity being undertaken to qualify as a Competent Person as defined in the 2012 Edition of the 'Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves'. Mr Faragher consents to the inclusion in this release of the matters based on his information in the form and context in which it appears.
Market Abuse Regulation (MAR) Disclosure
Certain information contained in this announcement would have been deemed inside information for the purposes of Article 7 of Regulation (EU) No 596/2014, as incorporated into UK law by the European Union (Withdrawal) Act 2018, until the release of this announcement.
**ENDS**
For further information please visit www.empiremetals.co.uk or contact:
About Empire Metals Limited
Empire Metals is an AIM-listed and OTCQB-traded exploration and resource development company (LON:EEE) with a primary focus on developing Pitfield, an emerging giant titanium project in Western Australia.
The high-grade titanium discovery at Pitfield is of unprecedented scale, with airborne surveys identifying a massive, coincident gravity and magnetics anomaly extending over 40km by 8km by 5km deep. Drill results have indicated excellent continuity in grades and consistency of the mineralised beds and confirm that the sandstone beds hold the higher-grade titanium dioxide (TiO₂) values within the interbedded succession of sandstones, siltstones and conglomerates. The Company is focused on two key prospects (Cosgrove and Thomas), which have been identified as having thick, high-grade, near-surface, bedded TiO₂ mineralisation, each being over 7km in strike length.
An Exploration Target* for Pitfield was declared in 2024, covering the Thomas and Cosgrove mineral prospects, and was estimated to contain between 26.4 to 32.2 billion tonnes with a grade range of 4.5 to 5.5% TiO2. Included within the total Exploration Target* is a subset that covers the weathered sandstone zone, which extends from surface to an average vertical depth of 30m to 40m and is estimated to contain between 4.0 to 4.9 billion tonnes with a grade range of 4.8 to 5.9% TiO2.
The Exploration Target* covers an area less than 20% of the overall mineral system at Pitfield which demonstrates the potential for significant further upside.
Empire is now accelerating the economic development of Pitfield, with a vision to produce a high-value titanium metal or pigment quality product at Pitfield, to realise the full value potential of this exceptional deposit.
The Company also has two further exploration projects in Australia; the Eclipse Project and the Walton Project in Western Australia, in addition to three precious metals projects located in a historically high-grade gold producing region of Austria.
*The potential quantity and grade of the Exploration Target is conceptual in nature. There has been insufficient exploration to estimate a Mineral Resource and it is uncertain if further exploration will result in the estimation of a Mineral Resource.
This information is provided by RNS, the news service of the London Stock Exchange. RNS is approved by the Financial Conduct Authority to act as a Primary Information Provider in the United Kingdom. Terms and conditions relating to the use and distribution of this information may apply. For further information, please contact rns@lseg.com or visit www.rns.com
Click here to connect with Empire Metals (OTCQB:EPMLF, AIM:EEE) to receive an Investor Presentation