HyProMag Usa Provides Positive Update to Valuation of Expanded Dallas-Fort Worth Plant and Commences Strategic Review to Explore a U.S. Listing

HyProMag Usa Provides Positive Update to Valuation of Expanded Dallas-Fort Worth Plant and Commences Strategic Review to Explore a U.S. Listing

Texas Facility Expansion Increases Magnet Capacity, Supports Domestic Critical-Minerals Supply Chains and Increases Post-Tax NPV to US$780 million (forecast prices) and US$409 million (current prices)

VANCOUVER, BRITISH COLUMBIA / ACCESS Newswire / December 15, 2025 / CoTec Holdings Corp. (TSXV:CTH,OTC:CTHCF)(OTCQB:CTHCF) ("CoTec" or the "Company") is pleased to note today's press release by HyProMag USA, LLC ("HyProMag USA"), its U.S.-based joint venture rare earth permanent magnet recycling and manufacturing company.

HyProMag USA announced that it has expanded the magnet capacity of its first facility (the "Texas Hub" or the "Project") and has updated the valuation of the Project with the completion of the Class 2 AACE [i] capital cost estimate as part of the Detailed Engineering Design and Value Engineering Phase (the "Detailed Design"). The Class 2 AACE capital cost estimate and detailed value-engineering work confirm a significant increase in magnet production capacity and materially improved Project economics.

In parallel, HyProMag USA has commenced a strategic review to evaluate a potential separate listing in the U.S. for late 2026 or early 2027, subject to successful execution of the Project and meeting the required regulatory approvals.

Key Highlights

  • Uplift in project valuation: Detailed Engineering results for state-of-the art rare earth magnet recycling and manufacturing operation in the United States with a Texas Hub supported by two pre-processing spoke sites co-located at Intelligent Lifecycle Solution ("ILS") sites in South Carolina and Nevada [ii] :

    • US$409 million post-tax Net Present Value ("NPV") [iii] and 27.6% real internal rate of return ("IRR") based on current market prices [iv], [v]

    • US$780 million post-tax NPV and 38.7% real IRR based on forecast market prices [vi]

  • Increased magnet production capacity: 941 metric tons per annum of recycled sintered NdFeB magnets and 611 metric tons per annum of associated NdFeB co-products (total payable capacity - 1,552 metric tons NdFeB) over a 40-year operating life

  • Competitive operating profile: Low all-in sustaining cost ("AISC") Xii, [vii] of US$22.3 per kg of NdFeB product versus current weighted average market price of US$56.8 per kg of NdFeB products, with significant scope for price recovery from current market conditions

  • Scalable design with expansion potential: The optimized layout allows for the inclusion of an additional two furnaces within three years following commissioning for an additional capital cost of approximately US$3 million

  • Up-front capital cost: Total initial capital cost of US$142 million [viii] (inclusive of an 8.2% contingency margin and Class 2 AACE estimated detailed design study and engineering costs) over a one-year construction phase

  • Attractive payback [ix] profile:

    • Payback at current market prices in 3.1 years at a profitability index ("PI") [x] of 2.89

    • Payback at forecast prices in 2.2 years at a PI of 5.5

  • Industrial and workforce impact: The Plant [xi] is expected to support revitalization of the U.S. magnet sector and create 90-100 skilled magnet manufacturing jobs

  • Feedstock security: HyProMag USA is continuing to develop its feedstock sources and supply through its partnership with ILS [xii]

  • Carbon profile: Independent ISO-compliant study for the feasibility study confirmed a very low carbon footprint of 2.35 kg CO 2 -eq per kg of NdFeB sintered block product [xiii]

  • Detailed Engineering: led by PegasusTSI Inc. (U.S.) and BBA USA Inc. (Canada), with support from HyProMag's international teams and the University of Birmingham

Julian Treger, CoTec CEO commented: "We are very pleased with the results of the Detailed Design to date and the resulting increase in magnet capacity and improved economics of the Texas Hub, the first of several hubs targeted by HyProMag USA. We believe that the Project provides a unique opportunity for the U.S. to partially address its dependence on foreign supplied rare earth magnets and alloy powders, critical inputs for accelerating the reshoring of U.S. manufacturing. With the Texas site secured through a long-term lease, Detailed Design well advanced and robust economics, our focus is now on securing sufficient feedstock and the necessary finance to commence with construction.

We have also started evaluating the pathway towards a potential U.S. listing, recognizing the opportunity to broaden our investor base and strengthen access to capital. Any listing would be subject to a successful execution of the Project and securing the necessary regulatory approvals. We expect that the timing of a U.S. listing, if pursued, would be towards late 2026 or early 2027."

Detailed Design and Project Economics Update

The Detailed Design, undertaken by a multidisciplinary team appointed by CoTec and Mkango and led by independent engineers, PegasusTSI and BBA, is now circa 30% complete and part of the study to date included an optimization of the operation as well as an updated capex profile. This has resulted in an increase in the post-tax NPV of the Project from US$262 million and an IRR of 23% based on current estimate prices to an NPV of US$409 million and an IRR of 27.6%. Using forecast market prices the post-tax NPV of the Project increases from US$503 million and an IRR of 31% to a post-tax NPV of US$780 million and an IRR of 38.7%.

The main driver of the increased economics was the debottlenecking of the magnet lines resulting in an increase in magnet production from circa 750 metric tons of magnets to 941 metric tons of magnets per annum. Furthermore, the Project is expected to provide 611 metric tons of NdFeB alloy co-products per annum. The average market price of NdFeB magnets increased by circa US$10 per kg Product from the feasibility study. NdFeB alloy co-products make up 39% of overall production compared to 28% in the feasibility study with the additional third Hydrogen Processing of Magnetic Scrap ("HPMS") vessel, resulting in an increase in average market price of all NdFeB Products from US$55 per kg Product to US$57 per kg Product.

The Detailed Design review also resulted in an increase in capex for the Project from US$135 million to US$142 million due to the addition of magnet finishing equipment and advanced Grain Boundary Diffusion ("GBD") techniques. GBD allows the Texas Hub greater operational flexibility to make grades of magnets with higher coercivity (>20 kOe), which are capable of operating at higher temperatures.

Potential Future U.S. Listing

HyProMag USA's owners, CoTec Holdings Corp. (TSXV: CTH,OTC:CTHCF; OTCQB: CTHCF) ("CoTec") and Mkango Resources Ltd. (AIM/TSX-V: MKA) ("Mkango") believe that a separate listing of the shares of HyProMag USA in the U.S. could potentially provide it with access to a broader investor audience, increased sources of potential capital, increased research coverage from U.S. investment banks and institutions at a critical time of rebuilding U.S. critical mineral supply.

HyProMag USA has begun engaging with prospective advisors to evaluate this pathway. Any listing-if ultimately pursued, would depend on:

  • Successful execution of the Texas Hub

  • Prevailing market conditions

  • Its ability to meet U.S. regulatory requirements and secure necessary approvals

While no decision has been made, HyProMag USA expects that any possible listing would occur no earlier than late 2026 or early 2027.

Data Verification

The independent engineers are professional engineers employed by Pegasus TSI, BBA, and Weston Solutions who are responsible for engineering design, processing, infrastructure, transportation, services, capital costs, operating costs, project timeline, permitting and economic analysis. The independent engineers have reviewed and approved the scientific and technical content and the resulting impact on the economics of the Project contained in this news release.

About HyProMag USA

HyProMag USA LLC is owned 50:50 by CoTec Holdings Corp. (TSXV: CTH,OTC:CTHCF; OTCQB: CTHCF) ("CoTec") and HyProMag Limited. HyProMag Limited is 100% owned by Maginito Limited which is owned on a 79.4%/20.6% basis by Mkango Resources Ltd. (AIM/TSX-V: MKA) and CoTec.

For more information, please visit www.hypromagusa.com

About CoTec

CoTec Holdings Corp. (TSX-V:CTH)(OTCQB:CTHCF) is redefining the future of resource extraction and recycling. Focused on rare earth magnets and strategic materials, CoTec integrates breakthrough technologies with strategic assets to unlock secure, sustainable, and low-cost supply chains for the United States and its allies.

CoTec's mission is clear: accelerate the energy transition while strengthening U.S. economic and national security. By investing in and deploying disruptive technologies, the Company delivers capital-efficient, scalable solutions that transform marginal assets, tailings, waste streams, and recycled products into high-value critical minerals.

From its HyProMag USA magnet recycling joint venture in Texas, to iron tailings reprocessing in Québec, to next-generation copper and iron solutions backed by global majors, CoTec is building a diversified portfolio with long-term growth, rapid cash flow potential, and high barriers to entry. The result is a game-changing platform at the intersection of technology, sustainability, and strategic materials.

For more information, please visit www.cotec.ca

For further information, please contact:

Braam Jonker - (604) 992-5600

Forward-Looking Information Cautionary Statement

Statements in this press release regarding the Company and its investments which are not historical facts are "forward-looking statements" which involve risks and uncertainties, including statements relating to the Company's interest in HyProMag USA, the potential future value of HyProMag USA and its potential future listing in the United States and management's expectations with respect to its current and potential future investments, including HyProMag USA, and the benefits to the Company which may be implied from such statements. Since forward-looking statements address future events and conditions, by their very nature, they involve inherent risks and uncertainties. Actual results in each case could differ materially from those currently anticipated in such statements, due to known and unknown risks and uncertainties affecting the Company, including but not limited to resource and reserve risks; environmental risks and costs; labor costs and shortages; uncertain supply and price fluctuations in materials; increases in energy costs; labor disputes and work stoppages; leasing costs and the availability of equipment; heavy equipment demand and availability; contractor and subcontractor performance issues; worksite safety issues; project delays and cost overruns; extreme weather conditions; and social and transport disruptions. For further details regarding risks and uncertainties facing the Company please refer to "Risk Factors" in the Company's filing statement dated April 6, 2022, a copy of which may be found under the Company's SEDAR+ profile at www.sedar.com. The Company assumes no responsibility to update forward-looking statements in this press release except as required by law. Readers should not place undue reliance on the forward-looking statements and information contained in this news release and are encouraged to read the Company's continuous disclosure documents which are available on SEDAR+ at www.sedarplus.ca .

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release.


[i] Association for the Advancement of Cost Engineering (AACE) - Class 2 Estimate includes contingency of 8.2%

[ii] https://hypromagusa.com/hypromag-usa-expands-feedstock-supply-agreementwith-global-electronics-recycler-intelligent-lifecycle-solutions/

[iii] 7% real discount rates. NPVs are calculated by discounting real US dollar cash flows from 2026

[iv] Current market prices ("Current Prices") for all NdFeB products sold in the U.S, excluding residual scrap, derived from updated U.S. 2024 price quotes, over the life of the asset

[v] NPV does not include the economic benefit of any government or state incentives, carbon pricing

[vi] Forecast market prices ("Forecast Prices") are the prices for all NdFeB products sold in the U.S, excluding residual scrap feed, with therare earth price component thereof derived from the latest rare earth oxide price forecasts from Q4 (2025) Adamas Intelligence, over the life of the asset

[vii] All In Sustaining Cost per kilogram of product sold

[viii] Capital excludes any U.S. tariffs

[ix] Payback defined as the period required to payback initial capital from first production

[x] The profitability index is a measure of the capital efficiency of a project and is defined as the project's NPV divided by the project capital incurred to reach first production

[xi] https://hypromagusa.com/hypromag-usa-finalizes-long-term-lease-for-dallas-fort-worth-rare-earth-magnet-recycling-and-manufacturing-hub/

[xii] https://www.cotec.ca/news/hypromag-usa-expands-feedstock-supply-agreement-with-global-electronics-recycler-intelligent-lifecycle-solutions

[xiii] https://cotec.ca/news/hypromag-usas-iso-compliant-product-carbon-footprint-study-confirms-exceptionally-low-co2-footprint-of-235-kg-co2-eq-per-kg-of-ndfeb-cut-sintered-block

[Xii] AISC is not a recognizes term under IFRS and have been determined using industry guidelines and practices

SOURCE: CoTec Holdings Corp.



View the original press release on ACCESS Newswire

News Provided by ACCESS Newswire via QuoteMedia

CTH:CA
CoTec Holdings

CoTec Holdings Investor Kit

  • Corporate info
  • Insights
  • Growth strategies
  • Upcoming projects

GET YOUR FREE INVESTOR KIT

The Conversation (0)
CoTec Holdings (TSXV:CTH)

CoTec Holdings

Unlocking value from resources and waste with disruptive mineral technologies

Unlocking value from resources and waste with disruptive mineral technologies Keep Reading...

Investor Insight

CoTec Holdings combines proprietary processing technologies with undervalued and legacy resource assets to create high-margin opportunities across rare earths, iron and copper sectors. With three execution-stage projects and a significant discount to attributable NAV, CoTec provides differentiated exposure to strategic minerals tied to electrification, AI infrastructure and supply-chain security.

Overview

CoTec Holdings (TSXV:CTH, OTCQX:CTHCF) is redefining the future of rare earth magnet recycling and strategic material extraction. Its portfolio spans rare earth magnet recycling, iron tailings reprocessing and emerging copper extraction technologies, all directed at fast-tracking revenue generation and reducing energy and capital intensity compared to conventional mining.CoTec Holdings mining model

Key Technologies

The company’s modular, capital-efficient model — including joint ventures and strategic subsidiaries — positions it for scalable growth and streamlined execution. With significant advancement in project execution, two completed feasibility studies, a third underway and an independent pre-feasibility study for HyProMag USA’s U.S. expansion completed in October 2026, CoTec is moving toward transforming its technology suite into commercial operations.

Why Invest in CoTec?

Why invest in CoTec Holdings

  • Differentiated Growth Model: Capital-light strategy deploying modular technologies at brownfield assets to accelerate timelines and reduce capital intensity.
  • Strategic Commodity Exposure: Exposure to rare earths, iron and copper — key materials for electrification, AI infrastructure, robotics and other critical supply chains.
  • Execution-Stage Portfolio: Three projects advancing through feasibility, engineering and financing stages.
  • Aligned Leadership: Strong insider ownership and experienced management with deep mining and capital markets expertise.
  • Lower-Carbon Production: Technologies designed to reduce energy use, water consumption and emissions relative to conventional mining.

Company Highlights

  • Technology-Driven Value Creation: Deploys proprietary, low-carbon processing technologies to extract value from waste, tailings and marginal deposits that traditional mining overlooks.
  • Execution-Stage Projects: Advancing three core assets — HyProMag USA magnet recycling, the Lac Jeannine iron tailings project, and MagIron iron ore feedstock, concentrator and pelletizer — with clear development pathways.
  • Expanding Rare Earth Footprint: HyProMag USA advances its scalable US hub-and-spoke rare earth magnet recycling roll-out using the Hydrogen Processing of Magnetic Scrap (“HPMS”) technology, with Inserma HDD pre-processing machines installed in South Carolina and Nevada and power secured for the Texas Hub. An independent Pre-Feasibility Study (October 2026) outlines a four-plant U.S. platform that would roughly quadruple planned magnet capacity to approximately 4,192 metric tons per year by 2034.
  • Strategic Copper Focus: Established a new subsidiary, CoTec Copper, to accelerate targeted investment in copper tailings and copper sulfide deposits globally, leveraging CoTec’s core technologies to unlock value.
  • Iron Ore & Green Steel: Advancing iron tailings reprocessing at Lac Jeannine and supporting the restart of MagIron in Minnesota and Indiana, which is now advancing merchant pig iron as its primary development strategy while retaining DR-grade pellet optionality, to supply high-grade feedstock for low-carbon steel production.
  • Strong Insider Support: Insiders own approximately 58 percent of shares, reinforcing alignment with long-term value creation.
  • Experienced Leadership: Board and executives bring deep mining, technology and capital markets experience from leading global organizations.

Key Technologies and Assets

HyProMag USA Projec

HyProMag USA project

HyProMag USA is CoTec’s flagship rare earth recycling platform and a cornerstone of its strategy to localize critical mineral supply chains. The project deploys Hydrogen Processing of Magnetic Scrap technology to recover neodymium iron boron magnets from end-of-life electronics and industrial equipment through a simplified hydrogen-based process that bypasses traditional chemical separation and smelting. This short-loop approach dramatically reduces energy use, water consumption and emissions while lowering operating complexity and cost.

The company’s phased development plan is targeting commissioning of its initial neodymium-iron-boron magnet cutting and finishing operations in Texas in H1 2027, with Phase 1 of the integrated Northlake, Texas recycling and magnet manufacturing facility targeted for completion in mid-2028. Up to 20 tonnes of magnet blocks supplied by HyProMag Group in the United Kingdom and Germany will be shaped and finished at HyProMag USA's operations for U.S. customers. Power capacity for the Texas Hub has been secured with Oncor, expected to be supplied predominantly from renewable energy, and contractor selection and permitting are underway. In October 2026, an independent Pre-Feasibility Study by PegasusTSI and BBA USA outlined an expansion to three additional plants and a Central Texas Hub, taking the platform to approximately 6,000 metric tons per year of salable material by 2034.

Watch an overview of HyProMag USA here: https://www.youtube.com/watch?v=v0d7rKdwu_s

Highlights

  • CoTec holds a 60.3 percent economic interest.
  • Northlake, Texas facility post-tax NPV of approximately US$723 million at forecast prices (October 2026 update to the 2024 Feasibility Study, reflecting detailed engineering and finalized equipment orders).
  • Northlake capital cost estimated at approximately US$167 million (AACE Class 2), with Phase 1 targeting about 1,034 metric tons per year of payable production and Phase 2 about 1,526 metric tons per year.
  • Initial magnet cutting and finishing operations, and first U.S. magnet sales, targeted for H1 2027.
  • Independent Pre-Feasibility Study (October 2026) indicates an incremental post-tax NPV of US$1.85 billion to US$2.06 billion and post-tax IRR of 31 to 36 percent for three additional plants and a Central Texas Hub, at a capital cost of approximately US$623 million to US$656 million; combined with Northlake, platform post-tax NPV of US$2.6 billion to US$2.8 billion and NdFeB magnet capacity of approximately 4,192 metric tons per year by 2034.
  • Inserma pre-processing machines have been installed at South Carolina and Nevada facilities to support feedstock preparation and scale-up of the hub-and-spoke rollout.
  • Integrated Texas Hub’s Hydrogen Processing of Magnet Scrap section targeted for mid-2028.
  • HyProMag GmbH, the HyProMag Group’s German operation in Pforzheim, was designated a Strategic Project under the EU Critical Raw Materials Act in October 2026, underscoring the strategic relevance of the HPMS technology.

Lac Jeannine Iron Project

CoTec Holdings Lac Jeannine Iron project

The Lac Jeannine project is an advanced tailings reprocessing initiative designed to transform legacy mining waste into high-purity iron concentrate for steelmaking. By leveraging existing infrastructure and modern processing technologies, the project aims to unlock value from previously discarded material while simultaneously advancing environmental reclamation. This approach aligns economic return with environmental remediation and supports domestic iron supply.

Metallurgical test work has demonstrated the project's ability to produce a high-purity iron concentrate grading in excess of 67 percent FeT, the threshold for high-purity iron under the Québec and Canadian critical and strategic minerals frameworks. CEO Julian Treger said that this validates the resource’s quality and the effectiveness of the company’s processing strategy. “(It also supports) our vision of transforming a historic environmental liability into a strategic asset capable of supporting the global transition to lower-carbon steel production."

Highlights

  • Indicated resource of about 31 Mt at 6.8 percent iron and inferred resource of about 71 Mt at 6.8 percent iron (2026 MRE).
  • After-tax NPV7 of US$91.9 million and IRR of 29.6 percent (2026 PEA).
  • Initial capex estimated at US$69.4 million.
  • 15-year mine life
  • A 41 percent increase in the resource according to the 2026 PEA, with a global increase in total iron grade from 6.7 to 6.8 percent.
  • Feasibility Study underway with BBA Consulting, with permitting and offtake discussions in progress.

MagIron represents a restart-ready brownfield iron ore deposit, concentrator and pelletizer project in Minnesota and Indiana, that benefits from an estimated $660m in historical capital investment, targeting the production of direct-reduction grade pellets for low-carbon steelmaking. The project benefits from extensive existing infrastructure and prior capital investment, allowing rapid recommissioning compared with greenfield developments. Its strategic positioning targets rising demand for domestically sourced feedstock for electric arc furnaces and decarbonized steel production.

Senior leadership changes have been made to support the ongoing development of MagIron, especially regarding restarting its iron ore concentrator in Minnesota and pellet plant in Indiana. In August 2026, a concept study by Primetals Technologies confirmed three technically credible pathways to produce approximately 2 million tonnes per year of granulated pig iron at MagIron’s facilities. MagIron is now advancing pig iron as its primary development strategy while retaining DR-grade pellet optionality, and independent test work at the Natural Resources Research Institute confirmed that MagIron concentrate can produce DR-grade pellets.

Highlights

  • CoTec owns approximately 17 percent.
  • Definitive Feasibility Study shows after-tax NPV of about US$1.60 billion and IRR about 27.6 percent.
  • Average annual production is about 2.6 Mt DR-grade pellets.
  • Life of mine is about 32 years.
  • Payback period is about 3 years and 7 months.
  • Mine and concentrator permits in place; pellet plant permitting in progress
  • Raised additional capital at a pre-money valuation of US$550 million from existing shareholders

CoTec Copper

CoTec Copper is a dedicated subsidiary created to accelerate the company’s exposure to copper, one of the most strategically important electrification metals. The unit focuses on acquiring and advancing copper tailings projects and sulphide deposits, particularly in historically productive mining jurisdictions where modern processing technologies can unlock additional value from previously uneconomic material. It leverages CoTec’s existing technology portfolio to enhance recoveries and lower operating costs.

Highlights

  • Targets assets in Tier 1 mining regions across the United States, Australia, Latin America and Africa.
  • Focuses on both tailings reprocessing and sulphide copper deposits.
  • Designed as a scalable growth platform to expand CoTec’s copper exposure.
  • Definitive joint venture shareholder agreement with Copper Intelligence (September 2026) to pursue historical copper tailings opportunities in the Democratic Republic of Congo, with funding to be sought from the U.S. International Development Finance Corporation and other sources once sufficient scale is achieved.
  • Non-binding framework agreement with Battery Mineral Resources (October 2026) toward a Strategic Economic Joint Venture at the Punitaqui copper mining district in Chile.

Binding Solutions

Binding Solutions provides a cold agglomeration technology that converts ultrafine mineral waste into ISO-compliant pellets or briquettes suitable for industrial use, particularly in green steel production. Unlike traditional pelletizing processes that rely on high-temperature furnaces, this approach operates at low temperatures, drastically reducing energy consumption and emissions while enabling monetization of low-grade or waste materials.

Highlights

  • Uses about 95 percent less energy than conventional pelletizing.
  • Generates about 98 percent fewer emissions.
  • Applicable to iron and other mineral fines.

Ceibo

Ceibo’s oxidative heap-leaching technology is designed to improve copper recovery from sulphide ores such as chalcopyrite, which account for the majority of global copper reserves but are traditionally difficult and costly to process. The process enhances recovery rates while lowering environmental impact and capital intensity, potentially transforming the economics of many existing copper assets.

Highlights

  • Potential recovery improvement from about 30 percent to approximately 75 percent.
  • Targets refractory sulphide deposits often considered uneconomic.
  • CoTec holds a minority equity interest and a seat on the technical advisory board.
  • Completed Series B financing of over US$30 million led by Energy Impact Partners to fund the scaling of the technology.
  • Investor syndicate includes BHP Ventures. Ceibo has partnered with Glencore’s Lomas Bayas operation in Chile (2024) and produced first copper cathodes at a demonstration plant with Compañía Minera San Gerónimo (2025).

WaveCracker

WaveCracker is a microwave-assisted mineral processing technology being advanced in collaboration with McGill University. The system uses targeted microwave energy to weaken mineral structures before conventional processing, improving metal liberation, reducing reagent consumption and lowering overall processing costs.

Highlights

  • Focused initially on copper sulphide applications.
  • Designed to accelerate leaching and recovery kinetics.
  • Builds on more than 30 years of microwave mineral processing research.

Salter Cyclones

Salter Cyclones technology uses multi-gravity separators to recover ultra-fine minerals from tailings streams that traditional processing methods cannot efficiently capture. By enabling recovery of metals from waste material, the system creates new revenue streams while reducing environmental liabilities associated with tailings storage.

Highlights

  • Applicable to iron, manganese and other fine mineral commodities.
  • Exclusive global rights for iron applications and regional exclusivity for manganese during the initial agreement period.
  • Converts waste into high-grade concentrates suitable for market.
  • CoTec-owned commercial-scale SCMG2 unit under assembly in the UK, with factory acceptance testing from Q3 2026, for deployment at Corem in Québec as a commercial testing and demonstration platform supporting Lac Jeannine and third-party iron ore opportunities.

Management Team

Julian Treger - Chief Executive Officer and Director

Julian Treger previously served as the CEO of Anglo Pacific Group before establishing Audley Capital Partners. At Audley, Treger directed the team through acquisitions totaling $570 million and achieved a realized Internal Rate of Return (IRR) of 38 percent. Treger continues to serve as the chairman of Audley Capital and holds both a BA and an MBA from Harvard.

Abraham Jonker - Chief Financial Officer

Abraham Jonker has 30 years of experience in mining finance. He previously served as the Lead Independent Director at Mandalay Resources and has been instrumental in leading over $750 million in equity and debt raises. Jonker is a Chartered Accountant in the UK, Canada, and South Africa and holds a Master's in Tax from Rand Afrikaans University.

John Singleton - Chief Operating Officer

John Singleton possesses over 25 years of experience in mining. His career began at De Beers, and he has since held senior leadership roles at Centamin and Rio Tinto. Singleton is a Fellow of the Royal Geological Society and holds degrees from Imperial College London and the University of Bristol.

John McGagh - Technology Consultant

John McGagh has more than 35 years of experience in digital transformation across various industries. He served as the head of innovation at Rio Tinto and is currently the chief digital officer at Snowy Hydro. McGagh is an adjunct professor at the University of Queensland and a Fellow of the Australian Academy of Technology Science and Engineering.

Eugene Hercun - VP Finance & Investor Relations

Eugene Hercun is a CPA, CA, with 15 years of varied experience in mining finance. He has led metal sales negotiations for more than $200 million annually and holds Level 1 of the CFA designation.

Hugh Thatcher - VP North America

Hugh Thatcher has 25 years of experience as in-house counsel in the mining and industrial sectors, including as Chief Counsel - US at Rio Tinto from 2020 to 2023. He holds a BA from Whitman College and a JD from Vanderbilt University.

Ian French - VP Projects

Ian French has more than 20 years of experience in project delivery and risk advisory across diamonds, gems and precious metals, including as Global Head of Diamond Risk & Security at Rio Tinto, and has led major infrastructure programs for mining companies and governments.

Board of Directors

Lucio Genovese, Independent Chairman

Lucio Genovese currently serves as the CEO of Nage Capital and as the chairman of Ferrexpo plc. He previously held senior roles at Glencore, including CEO of the CIS region. Genovese is a Chartered Accountant with degrees in Commerce and Accounting from the University of Witwatersrand.

Tom Albanese, Non-executive Director

Tom Albanese is the former CEO of Rio Tinto and Vedanta Resources. He was appointed Chair of Franco-Nevada Corporation in May 2026, having served as a director since 2013, and previously served as lead independent director of Nevada Copper. Albanese holds Master's and Bachelor's degrees from the University of Alaska Fairbanks.

Robert (Bob) Harward - Non-Executive Director

Robert Harward is a retired US Navy Vice Admiral (SEAL) and former deputy commander of US Central Command. He served on the US National Security Council and held senior strategy roles at Lockheed Martin and Shield AI.

Erez Ichilov - Non-executive Director

Erez Ichilov previously served as managing director at Traxys Projects, where he led investments in companies such as Nouveau Monde Graphite, Talon Metals, and Li-Cycle. Ichilov holds LLB and MBA degrees.

Sharon Fay - Non-executive Director

Sharon Fay previously served as head of equities and head of responsibility at AllianceBernstein. She built the firm's Corporate Responsibility and Responsible Investment teams. Fay is a Chartered Financial Analyst with a BA from Brown and an MBA from Harvard.

CoTec Holdings

CoTec Holdings Investor Kit

  • Corporate info
  • Insights
  • Growth strategies
  • Upcoming projects

GET YOUR FREE INVESTOR KIT

Interactive Chart

Latest Press Releases

Related News