Fuse Battery Announces Consolidation

Fuse Battery Announces Consolidation

(TheNewswire)

Coquitlam, BC, May 1, 2024 TheNewswire Fuse Battery Metals Inc. ("the Company" or "Fuse") (TSXV: FUSE, OTCQB: FUSEF, FRA: 43W3 ) announces that in order for the Company to evaluate and reorganize its current exploration programs and to better finance the Company, the Company and the Board of Directors have approved and authorized a consolidation of the Company's issued and outstanding shares on a 5 old for 1 new basis, consolidating its 187,948,801 currently outstanding shares to 37,589,760 shares.

The Company will not be issuing fractional shares as a result of the consolidation. Instead, all fractional shares equal or greater to one-half will be rounded to the next whole share. The Company's outstanding stock options and share purchase warrants will be adjusted upon completion of the consolidation.

The Company does not intend to change its name or seek a new stock trading symbol in connection with the Consolidation. The Company's shares will continue to trade under the symbol "FUSE". The consolidation remains subject to TSX Venture Exchange ("Exchange") approval.

A letter of transmittal will be sent to the registered shareholders providing instructions to surrender the share certificates evidencing their pre-consolidated common shares for replacement certificates of Fuse representing the number of post-consolidated common shares they are entitled to as a result of the consolidation. Until surrendered, each certificate representing the pre-consolidated common shares will be deemed to represent the number of post-consolidated common shares of Fuse Battery Metals Inc. that the holder thereof is entitled to as a result of the consolidation.

About Fuse Battery Metals Inc. https://fusebatterymetals.com

Fuse Battery Metals Inc. is a Canadian based exploration company that trades under the symbol FUSE on the TSX Venture Exchange. The Company's focus is on exploration for high value metals required for the manufacturing of batteries.

Nevada Lithium Properties

Fuse owns 100% of the Lithium Springs Property which is located at the southern end of Black Rock Desert, Nevada, about 132 air-line km north-northeast of Reno, Nevada in Sections 1, 2, 11, and 12 Township 32 North, Range 23. The center of the property is about 40.676° North Latitude, 119.331° West Longitude, (40° 40' 33" N, 119° 19' 52"): UTM X 302,900 UTMY 4,505,400 NAD 27; Zone 11 N. Black Rock Desert basin is about 110 km long and up to 25 km wide at the widest point. The central playa measures about 50 km northeast - southwest and 10 km southeast - northwest. The western arm of the Black Rock Desert covers an area of about 2,000 square kilometers and contains 5 of the 30 currently listed Known Geothermal Resource Areas in Nevada.

Fuse also owns 100% of the Monitor Valley North Lithium Property which includes 97 placer claims (MVN1 – MVN97) covering approximately 770 hectares of alluvial sediments and clays located 134 km northeast of Tonopah, Nevada. The property is located in Monitor Valley, Nevada, and the center of the property is about 39.21° North Latitude, 116.65° West Longitude. The property is 55 km due west of the Little Smokey Valley, Nevada where exploration for lithium is ongoing.

Ontario Cobalt Properties

Fuse owns a 100% interest its Glencore Bucke Property, situated in Bucke Township, 6 km east- northeast of Cobalt, Ontario, subject to a back-in provision, production royalty and off-take agreement. The Glencore Bucke Property consists of 16.2 hectares and sits along the west boundary of Fuse's Teledyne Cobalt Project. The Company also owns a 100% interest, subject to a royalty, in the Teledyne Project located near Cobalt, Ontario. The Teledyne Property adjoins the south and west boundaries of claims that hosted the Agnico Mine.

Glencore Bucke/Teledyne Property

Situated in Bucke Township, 6 km east-northeast of Cobalt, Ontario the Glencore Bucke Property adjoins, on its northeast corner, the former cobalt producing Agaunico Mine. From 1905 through to 1961, the Agaunico Mine produced a total of 4,350,000 lbs. of cobalt ("Co"), and 980,000 oz of silver ("Ag") (Cunningham-Dunlop, 1979). The amount of cobalt produced from the Agaunico Mine is greater than that of any other mine in the Cobalt Mining Camp. Production ceased in 1961 due to depressed Co prices and over-supply (Thomson, 1964). The Glencore property is 100% owned by Fuse Cobalt subject to a back-in provision, production royalty and off-take agreement.

The associated Teledyne Property, located in Bucke and Lorrain Townships, consists of 5 patented mining claims totaling 79.1 ha, and 46 unpatented mining claim cells totaling approximately 700 ha. The Property is easily accessible by highway 567 and a well-maintained secondary road .

Over CAD$25 million has been spent thus far, (2020 dollars inflation-adjusted) on the Teledyne Property resulting in valuable infrastructure including a development ramp and a modern decline going down 500 ft parallel to the main cobalt mineralized vein. The Teledyne Property is subject to a production royalty in favor of New Found Gold and an off-take agreement in favor of Glencore Canada Corp., while the Glencore Bucke Property is subject to a back-in provision, production royalty, and an off-take agreement in favor of Glencore Canada Corp. Glencore PLC is the world's largest producer of cobalt. A significant portion of the cobalt that was produced at the Agaunico Mine was located along structures (Vein #15) that extended southward towards the northern boundary of the Teledyne Cobalt Property, currently 100% owned by FUSE. Mineralization was generally located within 125 ft (38.1 m) above the Huronian/Archean unconformity. Stoping widths of up to 50 ft (15.2 m) were not unusual at the Agaunico Mine (Cunningham-Dunlop, 1979).

On Behalf of the Board of Directors

"Tim Fernback"

Tim Fernback, President & CEO

Contact Information:

Email: info@fusebatterymetals.com

Phone: 236-521-0207

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release. This news release may contain forward-looking statements which include, but are not limited to, comments that involve future events and conditions, which are subject to various risks and uncertainties. Except for statements of historical facts, comments that address resource potential, upcoming work programs, geological interpretations, receipt and security of mineral property titles, availability of funds, and others are forward-looking. Forward-looking statements are not guarantees of future performance and actual results may vary materially from those statements. General business conditions are factors that could cause actual results to vary materially from forward-looking statements.

Copyright (c) 2024 TheNewswire - All rights reserved.

News Provided by TheNewsWire via QuoteMedia

FUSE:CA
The Conversation (0)
Fuse Cobalt Inc.

Fuse Cobalt Inc.

Fuse Cobalt Inc is a Canada-based company engaged in the exploration and development of exploration and evaluation properties. The company currently holds interests in exploration and evaluation properties in the province of Ontario, Canada and the state of Nevada, USA. Its projects include the Glencore Bucke Cobalt property, Teledyne Cobalt property and Teels Marsh property.

Fuse Battery Announces Effective Date of Share Consolidation

Fuse Battery Announces Effective Date of Share Consolidation

(TheNewswire)

Coquitlam, BC, May 30, 2024 TheNewswire - Fuse Battery Metals Inc. ("the Company" or "Fuse") (TSXV: FUSE, OTCQB: FUSEF, FRA: 43W3 ) announces that further it its news release dated May 1, 2024, the Company is proceeding with a consolidation of its common shares on the bases of 1 new post-consolidated share for every 5 pre-consolidated shares.  The consolidation was approved by the Company's board of directors on May 7, 2024.  Following the completion of the 5:1 consolidation, the Company will have 37,589,760 shares issued and outstanding.

News Provided by TheNewsWire via QuoteMedia

Keep reading...Show less
ALTECH - CERENERGY Battery Prototype Reaches Key Milestones

ALTECH - CERENERGY Battery Prototype Reaches Key Milestones

Altech Batteries (ATC:AU) has announced ALTECH - CERENERGY Battery Prototype Reaches Key Milestones

Download the PDF here.

Altech Batteries Ltd  CERENERGY Battery Prototype Reaches Key Milestones

Altech Batteries Ltd CERENERGY Battery Prototype Reaches Key Milestones

Perth, Australia (ABN Newswire) - Altech Batteries Limited (ASX:ATC,OTC:ALTHF) (FRA:A3Y) (OTCMKTS:ALTHF) is pleased to announce the latest performance results of the CERENERGY(R) cell and battery pack prototypes. These results confirm the technological maturity and robustness of the CERENERGY(R) technology and mark another decisive step towards industrialisation.

Highlights

- 650+ cycles with no capacity loss, proving exceptional material stability and long operational lifespan compared to conventional batteries

- Near 100% Coulombic efficiency, confirming minimal side reactions and strong intrinsic safety of sodium nickel chloride chemistry

- High energy efficiency of up to 92%, surpassing typical 70-80% levels of competing battery technologies

- Proven safety under extreme conditions - cells remained stable during overcharge, deep discharge, and thermal cycling up to 300 degC with no gassing, leakage, or rupture

- Robust and reliable chemistry - sodium nickel chloride avoids flammable electrolytes and runaway risks, confirming suitability for safe, large-scale grid and renewable energy storage

- ABS60 prototype validated under real-world conditions -tested across diverse load profiles, high-current pulses up to 50 A, and thermal variations

- Stable, efficient performance - achieved ~88% round-trip efficiency with no observable capacity fade over 110+ cycles

CELL PERFORMANCE

The CERENERGY(R) prototype cells have successfully completed over 650 charge-discharge cycles without any detectable capacity loss. Cycle life is a critical measure of battery durability, as most conventional batteries experience gradual degradation with every cycle. Achieving such performance highlights the outstanding stability of the materials and points to the potential for a long operational lifespan.

For stationary energy storage systems (ESS), this translates into fewer battery replacements, lower lifetime operating costs, and greater reliability for end users.

The cells also delivered nearly 100% Coulombic efficiency alongside an energy efficiency of up to 92% across 650 cycles. Coulombic efficiency reflects the proportion of charge recovered during discharge relative to what was supplied during charging. A value approaching 100% indicates minimal side reactions or parasitic losses, confirming the intrinsic stability and safety of sodium nickel chloride chemistry. This high efficiency demonstrates that the cells are not expending energy on unwanted processes such as electrode degradation. Such performance is vital for scalability, ensuring reliable, longterm operation in commercial energy storage applications.

Energy efficiency represents the proportion of energy delivered relative to the energy supplied. Competing technologies, including conventional high-temperature batteries and many flow batteries, typically achieve only around 70-80%. By reaching 92%, CERENERGY(R) positions itself in a highly competitive class, offering more cost-effective energy storage, stronger economics for grid operators, and seamless compatibility with the requirements of renewable energy integration.

The cells achieved a nominal capacity of 100 Ah and 250 Wh, with reliable performance even at higher discharge rates. A key feature is their ability to support multiple daily charge-discharge cycles within the 20-80% state of charge (SoC) range at 25 A. This capability positions CERENERGY(R) as a highly flexible solution for grid operators and energy storage providers, enabling cost-efficient, long-life performance in applications that demand frequent cycling such as renewable integration, peak shaving, and backup power.

CERENERGY(R) prototype cells underwent rigorous abuse testing, including overcharge to 4 V, deep discharge to 0.2 V, and thermal cycling between room temperature and 300 degC. In all cases, the cells remained stable with no gassing, leakage, or rupture -clear proof of their outstanding safety. These results highlight the intrinsic stability of sodium nickel chloride chemistry, which avoids the flammable electrolytes and runaway risks common in lithium-ion batteries. The ability to withstand extreme electrical and thermal stress demonstrates CERENERGY(R)'s robustness and confirms its suitability for safe, largescale deployment in grid, renewable, and industrial energy storage applications. This was achieved over 3 cycles with 1.8 Full Charge Equivalent (FCE) into 22 hours.

BATTERY PACK ABS60 (60 kWh) PROTOTYPE

The first ABS60 battery pack prototype has been successfully validated under real-world operating conditions, marking a major step forward in product readiness. Testing included diverse load profiles,

continuous discharges at 25 A (equivalent to C-rate of C/4 (discharges in 4 hours), or one-quarter of the pack's rated capacity per hour) at 80% depth of discharge (DoD), short-duration high-current pulses up to 50 A, and carefully controlled thermal variations.

The pack consistently demonstrated stable performance, achieving ~88% round-trip efficiency while maintaining reliable thermal management. Efficiency refers to the proportion of input energy that can be retrieved during operation-a critical measure of economic viability for large-scale storage. Over more than 110 cycles, results showed no observable capacity fading and only a slight increase in internal resistance. Capacity fading refers to the gradual decline in usable energy over repeated cycles, while internal resistance influences power delivery and heat generation.

The absence of meaningful degradation confirms the durability and electrochemical stability of the ABS60 design. These outcomes are highly significant as they demonstrate that the pack can withstand real-world duty cycles while retaining performance and efficiency, translating into longer service life, fewer replacements, and lower total cost of ownership.

For grid operators and renewable integration projects, this combination of robust cycling capability, efficiency, and thermal stability underscores the ABS60's commercial readiness and competitive advantage in the stationary energy storage market.

These results are a strong confirmation of CERENERGY(R)'s technological leadership and a clear signal of the technology's competitiveness and robustness for future applications in energy storage and industrial markets.

Group Managing Director, Iggy Tan said "These results confirm CERENERGY(R)'s robustness and readiness for market adoption. Demonstrating long cycle life, high efficiency, and unmatched safety, we are now strongly positioned to deliver a competitive and sustainable alternative for grid and industrial energy storage."

*To view photographs, tables and figures, please visit:
https://abnnewswire.net/lnk/17QS44T3



About Altech Batteries Ltd:

Altech Batteries Limited (ASX:ATC,OTC:ALTHF) (FRA:A3Y) is a specialty battery technology company that has a joint venture agreement with world leading German battery institute Fraunhofer IKTS ("Fraunhofer") to commercialise the revolutionary CERENERGY(R) Sodium Alumina Solid State (SAS) Battery. CERENERGY(R) batteries are the game-changing alternative to lithium-ion batteries. CERENERGY(R) batteries are fire and explosion-proof; have a life span of more than 15 years and operate in extreme cold and desert climates. The battery technology uses table salt and is lithium-free; cobalt-free; graphite-free; and copper-free, eliminating exposure to critical metal price rises and supply chain concerns.

The joint venture is commercialising its CERENERGY(R) battery, with plans to construct a 100MWh production facility on Altech's land in Saxony, Germany. The facility intends to produce CERENERGY(R) battery modules to provide grid storage solutions to the market.

News Provided by ABN Newswire via QuoteMedia

Keep reading...Show less
Battery Anode Material Refinery - Design & Location Update

Battery Anode Material Refinery - Design & Location Update

Metals Australia (MLS:AU) has announced Battery Anode Material Refinery - Design & Location Update

Download the PDF here.

IR1:IR1 Completes Acquisition to Consolidate Black Hills, US

IR1:IR1 Completes Acquisition to Consolidate Black Hills, US

Rapid Critical Metals (RLL:AU) has announced IR1:IR1 Completes Acquisition to Consolidate Black Hills, US

Download the PDF here.

Critical Minerals Market Expected to Reach $586 Billion by 2032 as Demand Grows for Supply of Essential Minerals

Critical Minerals Market Expected to Reach $586 Billion by 2032 as Demand Grows for Supply of Essential Minerals

FN Media Group News Commentary - Industry experts project that the global critical minerals market will continue maintaining substantial growth as it has in recent years. The global critical minerals market is experiencing unprecedented growth, primarily driven by the accelerating transition to clean energy technologies. According to the International Energy Agency (IEA), the market size of key energy transition minerals doubled over the past five years, aligning closely with the market size for iron ore mining. This surge is largely attributed to the tripling of lithium demand, a 70% increase in cobalt demand, and a 40% rise in nickel demand between 2017 and 2022, with clean energy applications accounting for significant portions of this demand. The sustainability of the global critical minerals market is increasingly influenced by governmental initiatives aimed at reducing environmental impact and enhancing resource efficiency. A recent report from DataM Intelligence projected that Critical Minerals Market Size reached US$ 328.19 billion in 2024 and is expected to reach US$ 586.63 billion by 2032, growing with a CAGR of 7.53% during the forecast period 2025-2032. The report said: "A notable trend in the critical minerals market is the increasing investment in mineral development, which witnessed a 30% rise in 2022 following a 20% increase in 2021. Lithium saw the sharpest investment increase at 50%, followed by copper and nickel. This investment surge is a response to the soaring demand for minerals like lithium, cobalt, nickel, and copper, driven by the deployment of clean energy technologies such as electric vehicles, wind turbines, and solar panels." Active companies in the markets this week include: Saga Metals Corp. (OTCQB: SAGMF) (TSX-V: SAGA), TMC the metals company Inc. (NASDAQ: TMC), Critical Metals Corp. (NASDAQ: CRML), Rio Tinto Group (NYSE: RIO), Empire Metals Limited (OTCQX: EPMLF) (LON: EEE).

News Provided by GlobeNewswire via QuoteMedia

Keep reading...Show less

Latest Press Releases

Related News

×