Canada Nickel Company Announces Assay Results and Confirms Discovery at Deloro Property

Highlights

Second significant discovery from newly acquired regional properties – Reid and Deloro .
Assay results at Deloro confirmed expected grades over entire core length of 487 metres of 0.25% nickel including 91 metres of 0.28% nickel.
Mineralization successfully defined over 1.1 kilometres of strike length by 100 – 400 metres wide to a depth of 420 metres.

Canada Nickel Company Inc. (" Canada Nickel " or the " Company ") (TSXV: CNC) (OTCQX: CNIKF) today announced assay results at its Deloro property, which confirm the second significant discovery from the Company's newly acquired properties.

Mark Selby , Chair and Chief Executive Officer said, "We are very pleased with the results from Deloro where we successfully delineated our target mineralization and grades throughout the intended geophysical target. Deloro now joins Reid as another significant, sizeable nickel discovery and we look forward to continued success as we continue exploration around our regional properties, developing what we believe has the potential to be one of the world's leading nickel districts. We will provide further updates on drilling and our regional plans in September."

Drilling was highlighted by hole DEL22-01 which intersected 487 metres of 0.25% nickel with a higher-grade section near the bottom of the hole intersecting 0.28% nickel over 91 metres and hole DEL 22-09 which intersected 393 metres of 0.26% nickel. Complete assays from 5 of the 11 holes are available for release (see Table 1).

Deloro Nickel Property

The Deloro property is located 9 kilometres southeast of Timmins and contains an ultramafic target that measures 1.4 kilometres north-south by 450 metres east-west based on the total magnetic intensity (TMI) (see Figure 1). Ultramafic lithologies and nickel mineralization has been found throughout the target anomaly.

Hole DEL22-01 collared in dunite on the northern half of the target and was drilled to the southwest. The hole remained largely in dunite for a total length of 487 metres grading 0.25% nickel, with a higher-grade section near the bottom of the hole intersecting 0.28% nickel over 91 metres.

DEL22-09 collared in dunite and the hole intersected 393 metres of 0.26% nickel, including 51 metres of 0.28% nickel. The hole finished in peridotite.

DEL22-06 collared in peridotite and transitioned in composition from dunite to peridotite and intersected a total of 227 metres of mineralization – 74 metres grading 0.20% nickel starting at 54 metres and 141 metres grading 0.21% nickel starting at 140 metres including a 12-metre core length of 0.33% nickel and 0.15 g/t Pt+Pd from 248 to 260 metres. This higher-grade Pt+Pd in dunite has similar characteristics to the high-grade core in Crawford's East Zone.

DEL22-07 collared in dunite, on section with DEL22-01, 100 metres to the west. DEL22-10 collared in dunite and remained in dunite for the majority of the hole except for minor pyroxenite and mafic dykes. The hole intersected 79 metres of 0.25% nickel 124 metres downhole, and 87 metres of 0.25% nickel at 235 metres, before intersecting intermediate volcanics at the contact.

Table 1: Deloro Exploration Drilling Results.

Hole ID	From	To	Length	Ni	Co	Pd	Pt	Cr	Fe	S
	(m)	(m)	(m)	( %)	( %)	(g/t)	(g/t)	( %)	( %)	( %)
DEL22-01	1.8	487.0	485.2	0.25	0.010	0.003	0.003	0.22	5.03	0.03
including	234.0	365.9	131.9	0.27	0.011	0.003	0.003	0.24	5.27	0.03
including	373.5	464.9	91.4	0.28	0.011	0.003	0.003	0.37	5.20	0.03
DEL22-06	54.5	128.2	73.7	0.20	0.011	0.003	0.006	0.49	5.82	0.04
and	140.5	281.9	141.4	0.21	0.012	0.028	0.023	0.50	6.59	0.10
including	227.5	260.0	32.5	0.27	0.012	0.049	0.034	0.57	6.55	0.14

Table 1: Deloro Exploration Drilling Results (continued).

Hole ID	From	To	Length	Ni	Co	Pd	Pt	Cr	Fe	S
	(m)	(m)	(m)	( %)	( %)	(g/t)	(g/t)	( %)	( %)	( %)
including	248.3	260.0	11.7	0.33	0.014	0.103	0.055	0.69	7.50	0.20
DEL22-07	3.1	113.0	109.9	0.19	0.011	0.021	0.015	0.39	6.32	0.02
and	128.2	216.4	88.2	0.17	0.011	0.018	0.016	0.39	6.72	0.04
including	129.5	159.5	30.0	0.24	0.013	0.039	0.028	0.46	7.20	0.09
DEL22-09	9.0	402.0	393.0	0.26	0.010	0.003	0.006	0.25	4.66	0.04
including	58.5	99.0	40.5	0.28	0.010	0.003	0.005	0.45	4.51	0.01
including	218.5	269.5	51.0	0.28	0.011	0.003	0.005	0.14	4.71	0.10
DEL22-10	3.0	87.0	84.0	0.23	0.010	0.003	0.005	0.22	5.63	0.09
and	123.5	203.0	79.5	0.25	0.010	0.003	0.005	0.16	4.92	0.10
and	235.3	322.7	87.4	0.25	0.010	0.003	0.005	0.23	5.09	0.13

* Note: The lengths reported are core lengths and not true widths. Canada Nickel has insufficient information to determine the attitude, either of the ultramafic body or of mineralized zones within it.

Table 2: Drill Hole Orientation.

Hole ID	Easting	Northing	Azimuth	Dip	Length
	(mE)	(mN)	(⁰)	(⁰)	(m)
DEL22-01	480,413	5,361,341	248	-60	492.0
DEL22-02	480,334	5,361,525	248	-60	411.0
DEL22-03	480,600	5,361,417	248	-60	434.0
DEL22-04	480,475	5,361,151	68	-60	401.0
DEL22-05	480,406	5,361,339	68	-60	401.0
DEL22-06	480,384	5,361,139	248	-50	347.0
DEL22-07	480,322	5,361,305	248	-50	278.0
DEL22-08	480,532	5,361,006	248	-60	402.0
DEL22-09	480,566	5,360,849	248	-50	402.0
DEL22-10	480,980	5,360,570	230	-50	342.0
DEL22-11	480,566	5,360,849	70	-45	402.0

Assays, Quality Assurance/Quality Control and Drilling and Assay

Edwin Escarraga , MSc, P.Geo., a "qualified person" as defined by National Instrument 43-101, is responsible for the on-going drilling and sampling program, including quality assurance (QA) and quality control (QC). The core is collected from the drill in sealed core trays and transported to the core logging facility. The core is marked and sampled at 1.5 metre lengths and cut with a diamond blade saw. One set of samples is transported in secure bags directly from the Canada Nickel core shack to Actlabs Timmins, while a second set of samples is securely shipped to SGS Lakefield for preparation, with analysis performed at SGS Burnaby or SGS Callao ( Peru ). All are ISO/IEC 17025 accredited labs. Analysis for precious metals (gold, platinum and palladium) are completed by Fire Assay while analysis for nickel, cobalt, sulphur and 17 other elements are performed using a peroxide fusion and ICP-OES analysis. Certified standards and blanks are inserted at a rate of 3 QA/QC samples per 20 core samples making a batch of 60 samples that are submitted for analysis.

Qualified Person and Data Verification

Stephen J. Balch P.Geo . (ON), VP Exploration of Canada Nickel and a "qualified person" as is defined by National Instrument 43-101, has verified the data disclosed in this news release, and has otherwise reviewed and approved the technical information in this news release on behalf of Canada Nickel Company Inc.

About Canada Nickel Company

Canada Nickel Company Inc. is advancing the next generation of nickel-sulphide projects to deliver nickel required to feed the high growth electric vehicle and stainless steel markets. Canada Nickel Company has applied in multiple jurisdictions to trademark the terms NetZero Nickel ^TM , NetZero Cobalt ^TM , NetZero Iron ^TM and is pursuing the development of processes to allow the production of net zero carbon nickel, cobalt, and iron products. Canada Nickel provides investors with leverage to nickel in low political risk jurisdictions. Canada Nickel is currently anchored by its 100% owned flagship Crawford Nickel-Cobalt Sulphide Project in the heart of the prolific Timmins-Cochrane mining camp. For more information, please visit www.canadanickel.com.

For further information, please contact:

Mark Selby
Chair and CEO
Phone: 647-256-1954
Email: info@canadanickel.com

Cautionary Statement Concerning Forward-Looking Statements

This press release contains certain information that may constitute "forward-looking information" under applicable Canadian securities legislation. Forward looking information includes, but is not limited to, drill and exploration results relating to the target properties described herein (the "Properties"), the potential of the Crawford Nickel Sulphide Project and the Properties, timing of economic studies and mineral resource estimates, the ability to sell marketable materials, strategic plans, including future exploration and development results, and corporate and technical objectives. Forward-looking information is necessarily based upon several assumptions that, while considered reasonable, are subject to known and unknown risks, uncertainties, and other factors which may cause the actual results and future events to differ materially from those expressed or implied by such forward-looking information. Factors that could affect the outcome include, among others: future prices and the supply of metals, the future demand for metals, the results of drilling, inability to raise the money necessary to incur the expenditures required to retain and advance the property, environmental liabilities (known and unknown), general business, economic, competitive, political and social uncertainties, results of exploration programs, risks of the mining industry, delays in obtaining governmental approvals, failure to obtain regulatory or shareholder approvals, and the impact of COVID-19 related disruptions in relation to the Company's business operations including upon its employees, suppliers, facilities and other stakeholders. There can be no assurance that such information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such information. Accordingly, readers should not place undue reliance on forward-looking information. All forward-looking information contained in this press release is given as of the date hereof and is based upon the opinions and estimates of management and information available to management as at the date hereof. Canada Nickel disclaims any intention or obligation to update or revise any forward-looking information, whether because of new information, future events or otherwise, except as required by law.

View original content to download multimedia: https://www.prnewswire.com/news-releases/canada-nickel-company-announces-assay-results-and-confirms-discovery-at-deloro-property-301607201.html

SOURCE Canada Nickel Company Inc.

View original content to download multimedia: https://www.newswire.ca/en/releases/archive/August2022/17/c1898.html

News Provided by Canada Newswire via QuoteMedia

canada nickel base metals investing tsxv:cnc Base Metals Investing

CNC:CA

Canada Nickel Achieves Best Drill Results to Date at Reid

Highlights

Best Reid interval to date – 661 metres of 0.29% nickel including 100 metres of 0.42% nickel and 40 metres of 0.51% nickel in REI-24-35
All 8 holes targeting Reid Central Core intersected core lengths greater than 620 metres with average grades of 0.21% to 0.29% nickel

Canada Nickel Company Inc. (" Canada Nickel " or the " Company ") (TSXV: CNC) (OTCQX: CNIKF) is pleased to announce positive assay results from its ongoing 2024 exploration program at its Reid property, located 37 kilometres northwest of Timmins, Ontario .

Hole ID	From (m)	To (m)	Length (m)*	Ni %	Co %	Pd g/t	Pt g/t	Cr %	Fe %	S %
Central Core
REI24-27	27.2	702.0	674.8	0.27	0.012	0.013	0.008	0.67	5.62	0.076
including	60.0	94.5	34.5	0.30	0.013	0.024	0.007	0.66	5.76	0.110
REI24-28	18.6	705.0	686.4	0.26	0.012	0.010	0.006	0.84	5.90	0.023
including	235.5	250.5	15.0	0.30	0.012	0.006	0.008	0.87	5.46	0.025
REI24-29	54.0	568.6	514.6	0.23	0.010	0.011	0.008	0.63	6.59	0.028
and	642.6	696.0	53.4	0.24	0.014	0.017	0.011	0.85	7.46	0.026
REI24-30	30.0	702.0	672.0	0.24	0.013	0.014	0.010	0.70	6.79	0.060
including	633.0	640.5	7.5	0.42	0.018	0.080	0.040	0.63	8.13	0.288
and	664.5	673.5	9.0	0.37	0.019	0.071	0.046	0.51	8.75	0.275
REI24-31	28.0	648.4	620.4	0.22	0.013	0.013	0.009	0.61	6.85	0.072
including	31.5	340.5	309.0	0.27	0.012	0.010	0.006	0.71	6.11	0.074
including	39.0	52.0	13.0	0.41	0.014	0.026	0.014	0.69	5.68	0.075
and	279.0	306.0	27.0	0.29	0.014	0.016	0.005	0.68	7.61	0.131
REI24-32	21.0	696.0	675.0	0.21	0.012	0.008	0.007	0.71	6.43	0.034
including	166.5	421.5	255.0	0.25	0.011	0.005	0.004	0.89	5.57	0.038
REI24-35	40.5	702.0	661.5	0.29	0.012	0.018	0.013	0.69	5.67	0.052
including	340.5	361.5	21.5	0.34	0.013	0.221	0.094	0.66	5.85	0.074
and	601.5	702.0	100.5	0.42	0.015	0.035	0.019	0.59	6.26	0.123
including	645.0	685.5	40.5	0.51	0.015	0.040	0.023	0.59	6.21	0.149
REI24-37	42.2	697.5	655.3	0.24	0.013	0.012	0.009	0.57	6.28	0.032
including	42.2	312.0	269.8	0.27	0.013	0.023	0.018	0.60	6.19	0.029
including	202.5	219.0	16.5	0.41	0.015	0.241	0.146	0.49	7.16	0.093
REI24-38	27.0	702.0	675.0	0.22	0.012	0.024	0.018	0.63	6.55	0.045
including	238.0	550.5	312.5	0.26	0.012	0.048	0.035	0.69	6.04	0.056
including	301.5	327.0	25.5	0.32	0.012	0.009	0.006	0.78	5.97	0.078
and	510.0	540	30	0.33	0.012	0.174	0.229	0.74	6.16	0.103
Central Dyke Corridor
REI24-23	24.0	303.0	279.0	0.18	0.014	0.010	0.012	0.53	7.82	0.016
and	343.8	564.0	220.2	0.25	0.013	0.010	0.006	0.77	7.47	0.038
REI24-24	78.9	94.9	16.0	0.27	0.012	0.067	0.024	0.68	5.89	0.098
and	174.1	247.2	73.1	0.25	0.012	0.006	0.005	0.83	5.61	0.036
and	260.0	627.0	367.0	0.24	0.011	0.004	0.007	0.85	5.79	0.063
and	674.0	705.0	31.0	0.19	0.012	0.003	0.006	0.55	7.32	0.028
REI24-25	28.0	312.0	284.0	0.18	0.013	0.009	0.011	0.58	7.64	0.035
and	322.7	717.0	394.3	0.23	0.012	0.008	0.007	0.78	6.13	0.034
REI24-26	30.6	106.5	75.9	0.27	0.011	0.016	0.013	0.77	5.47	0.034
and	122.9	280.0	157.1	0.20	0.013	0.050	0.018	0.56	7.65	0.033
and	321.4	488.5	167.1	0.20	0.014	0.024	0.016	0.50	8.25	0.032

News Provided by PR Newswire via QuoteMedia

Keep reading...Show less

Canada Nickel Closes Previously Announced US$15 Million Loan Facility with Auramet International, Inc.

Canada Nickel Company Inc. (" Canada Nickel " or the " Company ") (TSXV: CNC) (OTCQX: CNIKF) today announced that it has closed a secured loan facility with Auramet International, Inc. ("Auramet") of US$15 million previously announced on June 24, 2024 .

The loan is due January 9, 2025 , carries an interest rate of 1.00% per month, and is subject to a 2.5% arrangement fee. At closing, Auramet also received 750,000 1-year warrants with a strike price of $1.42 per common share. The loan is subject to such terms and conditions including certain specified positive and negative covenants that are customary for a transaction of this nature. The warrants and the underlying shares are subject to a four month hold period under applicable Canadian securities laws. The Company expects to use the proceeds from the loan for working capital purposes.

About Auramet

Auramet is one of the largest physical precious metals merchants in the world with over US$20 billion in annual revenues and which provides a full range of services to all participants in the precious metals supply chain. Auramet is a private company established in 2004 by seasoned professionals who have assembled a global team of industry specialists with over 350 years combined industry experience. Their business consists of three main activities: physical metals trading, metals merchant banking (including direct lending) and project finance advisory services. The company has built a consistently successful and prominent franchise in the metals space on the back of an experienced management team that has proven to be innovative and capable of delivering the highest quality service to participants in the sector. In fiscal year 2023 it purchased over 7 million ounces of gold, 126 million ounces of silver and 3 million ounces of PGMs, and has provided term financing facilities in excess of US$1 billion to date. Auramet is looking to grow its capital investment business in equity, royalties and streams in the precious metals and battery related metals mining space. Auramet is proud to have been awarded a Gold Medal the past two years for its ESG commitment by EcoVadis, the most trusted provider of ESG ratings with a network of more than 90,000 rated companies. For more information on Auramet, please visit www.auramet.com .

About Canada Nickel Company

Canada Nickel Company Inc. is advancing the next generation of nickel-sulphide projects to deliver nickel required to feed the high growth electric vehicle and stainless steel markets. Canada Nickel Company has applied in multiple jurisdictions to trademark the terms NetZero Nickel™, NetZero Cobalt™, NetZero Iron™ and is pursuing the development of processes to allow the production of net zero carbon nickel, cobalt, and iron products. Canada Nickel provides investors with leverage to nickel in low political risk jurisdictions. Canada Nickel is currently anchored by its 100% owned flagship Crawford Nickel-Cobalt Sulphide Project in the heart of the prolific Timmins - Cochrane mining camp. For more information, please visit www.canadanickel.com .

For further information, please contact:

Mark Selby
CEO
Phone: 647-256-1954
Email: info@canadanickel.com

Cautionary Statement Concerning Forward-Looking Statements

This press release contains certain information that may constitute "forward-looking information" under applicable Canadian securities legislation. Forward looking information includes, but is not limited to, the use of proceeds from the loan, the ability of the Company to deliver nickel required to feed the high growth electric vehicle and stainless steel markets, and the development of processes to allow the production of net zero carbon nickel, cobalt, and iron products. Readers should not place undue reliance on forward looking statements. Forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements of Canada Nickel to be materially different from any future results, performance or achievements expressed or implied by the forward-looking statements. There are no assurances that Crawford will be placed into production. Factors that could affect the outcome include, among others: inability to repay the loan or comply with the covenants set out in the loan agreement; the actual results of development activities; project delays; inability to raise the funds necessary to complete development; general business, economic, competitive, political and social uncertainties; future prices of metals or project costs could differ substantially and make any commercialization uneconomic; availability of alternative nickel sources or substitutes; actual nickel recovery; conclusions of economic evaluations; changes in applicable laws; changes in project parameters as plans continue to be refined; accidents, labour disputes, the availability and productivity of skilled labour and other risks of the mining industry; political instability, terrorism, insurrection or war; delays in obtaining governmental approvals, necessary permitting or in the completion of development or construction activities; mineral resource estimates relating to Crawford could prove to be inaccurate for any reason whatsoever; additional but currently unforeseen work may be required to advance to the feasibility stage; and even if Crawford goes into production, there is no assurance that operations will be profitable. Although Canada Nickel has attempted to identify important factors that could cause actual actions, events or results to differ materially from those described in forward-looking statements, there may be other factors that cause actions, events or results to differ from those anticipated, estimated or intended. Forward-looking statements contained herein are made as of the date of this news release and Canada Nickel disclaims any obligation to update any forward-looking statements, whether as a result of new information, future events or results or otherwise, except as required by applicable securities laws. Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

View original content to download multimedia: https://www.prnewswire.com/news-releases/canada-nickel-closes-previously-announced-us15-million-loan-facility-with-auramet-international-inc-302192435.html

SOURCE Canada Nickel Company Inc.

View original content to download multimedia: http://www.newswire.ca/en/releases/archive/July2024/09/c7393.html

News Provided by Canada Newswire via QuoteMedia

Keep reading...Show less

Quetzal Copper Provides Update on Financing

Quetzal Copper Corp. (TSXV: Q) ("Quetzal" or the "Company") announces a non-brokered private placement (the "Offering") for aggregate gross proceeds of up to C$3,000,000, from the sale of the following:

up to 6,666,666 units of the Company (the "Units") at a price of C$0.15 per Unit for gross proceeds of up to C$1,000,000 from the sale of Units; and

up to 11,764,705 flow through units of the Company (the "FT Units") at a price of C$0.17 per FT Unit for gross proceeds of up to C$2,000,000 from the sale of FT Units. Each FT Share will be issued as a "flow-through share" within the meaning of the Income Tax Act (Canada).

Each Unit and FT Unit issued under the Offering shall consist of one common share in the capital of the Company (each, a "Common Share") and one-half of one Common Share purchase warrant (each whole warrant, a "Warrant"). Each Warrant will entitle the holder thereof to acquire one Common Share at an exercise price of $0.25 per Common Share for a period of 24 months from the closing of the Offering (the "Closing").

News Provided by Newsfile via QuoteMedia

Keep reading...Show less

Silver47 Exploration Corp. Opens the Market

Gary Thompson, Chief Executive Officer, Silver47 Exploration Corp. ("Silver47" or the "Company") (TSXV: AGA), and his team, joined Dean McPherson, Head, Business Development, Global Mining, Toronto Stock Exchange (TSX), to open the market to celebrate the Company's new listing on the TSX Venture Exchange.

Silver47 Exploration Corp. is focused on rapidly expanding its resource base of silver, gold, copper, zinc and lead, with the aim of reaching a milestone development decision in the next 3-5 years, while also driving new discoveries.

Backed by industry leaders, the Company is advancing its flagship Red Mountain project in Alaska, which currently hosts 168.6 million ounces of silver at 336 g/t AgEq, equivalent to 1 million tonnes of zinc at 7% ZnEq or 2 million ounces of gold at 4 g/t AuEq.

Silver47's initial focus is on increasing the silver-gold rich Dry Creek and West Tundra Flats resources at the eastern end of this district-scale land package, with an exploration target of 50Mt in the 300-400 g/t AgEq grade range for 480Moz Eq. The company's extensive land holdings of 942 state mining claims and one mining lease cover a 60km trend of polymetallic mineralization.

MEDIA CONTACT:
Gary Thompson
President & CEO
info@silver47.ca
403-870-1166

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/233679

News Provided by Newsfile via QuoteMedia

Keep reading...Show less

Osisko Metals Corporate Update

NOT FOR DISTRIBUTION TO U.S. NEWSWIRE SERVICES OR FOR DISSEMINATION IN THE UNITED STATES

Osisko Metals Incorporated (the " Company " or " Osisko Metals ") ( TSX-V: OM ; OTCQX: OMZNF ; FRANKFURT: OB51 ) announces, further to its news release dated November 18, 2024 (entitled " Osisko Metals Expands Leadership Team and Announces C$100 Million Bought Deal Financing " ), the following changes to Osisko Metals' leadership team:

News Provided by GlobeNewswire via QuoteMedia

Keep reading...Show less

Bold Ventures Identifies New Gold Zone at Its Burchell Gold and Copper Property

Bold Ventures Inc. (TSXV: BOL) (the "Company" or "Bold") is pleased to announce that it has received assays up to 56.9 gt gold (Au) from a newly identified zone at its Burchell Property ("the Property"), sampled during a prospecting and field reconnaissance program in November of this year. The high-grade sample was collected approximately 15 meters southwest of 2023 samples which returned between 0.04 and 0.51 gt Au. The zone has now been named the 111 (one-eleven) Zone. A geological sketch map of the outcrop exposure was made and three grab samples were collected along or near the zone during the 2024 program (see Table 1 below for coordinates, descriptions, and results). Assay results ranged from

News Provided by Newsfile via QuoteMedia

Keep reading...Show less

Hole ID	Easting (mE)	Northing (mN)	Azimuth (⁰)	Dip (⁰)	Length (m)
REI24-23	456758	5404333	135	-55	564
REI24-24	457157	5404317	0	-60	705
REI24-25	457345	5404725	180	-60	717
REI24-26	457350	5404200	258	-50	528
REI24-27	456165	5403790	0	-60	702
REI24-28	456960	5404500	180	-70	705
REI24-29	457555	5403900	0	-55	696
REI24-30	457350	5404450	180	-60	702
REI24-31	456365	5404000	0	-60	648
REI24-32	456960	5404500	315	-60	705
REI24-35	456960	5404100	180	-60	702
REI24-37	457765	5404100	180	-60	697
REI24-38	456365	5403800	180	-60	702

Hole ID	Easting (mE)	Northing (mN)	Azimuth (⁰)	Dip (⁰)	Length (m)
CR24-345	473300	5409950	356	-60	402
CR24-344	473205	5409985	0	-90	366
CR24-342	473373	5410260	170	-45	397
CR24-341	473833	5408690	0	-75	540
CR24-340	473278	5410290	173	-42	462
CR24-338	473610	5409950	0	-70	252
CR24-336	473827	5409967	0	-78	270
CR24-335	473950	5410000	0	-50	201
CR24-334A	473681	5408782	12	-70	372
CR24-333	474215	5409965	340	-77	236
CR24-332	474180	5410015	0	-72	252
CR24-331	473555	5408774	15	-74	501
CR24-330	474350	5409905	320	-80	450
CR24-329	473265	5408895	45	-70	450
CR24-328	474460	5409970	335	-55	231
CR24-327	473265	5408895	14	-66	351
CR24-326	474515	5409895	0	-80	273
CR24-325	474600	5409925	0	-80	201
CR24-324	472837	5409083	35	-55	351
CR24-323	474600	5409925	0	-50	261
CR24-322	474715	5409905	0	-80	306
CR24-321	474770	5409965	5	-75	300
CR24-320	474820	5409900	0	-80	270
CR24-319	474915	5409940	5	-84	171
CR24-318	474915	5409940	5	-50	204
CR24-317	475120	5409900	0	-80	300
CR24-316	475120	5409900	0	-50	207
CR24-315	473682	5410225	172	-54	399
CR22-298	473564	5410008	0	-55	252
CR22-296	473374	5409984	2	-70	201
CR22-295	473374	5409984	2	-50	282
CR22-294	475434	5409927	0	-70	192
CR22-291	475204	5409922	10	-50	210
CR22-288	474805	5409925	2	-70	171
CR22-287	474806	5409923	4	-50	252
CR22-286	474705	5409932	2	-70	180
CR22-285	474705	5409932	2	-50	252
CR22-284	474504	5409940	2	-50	261
CR22-283	474504	5409939	2	-75	222
CR22-282	474303	5409955	2	-75	222
CR22-281	474303	5409956	2	-50	252
CR22-272	473764	5408865	172	-82	651
CR22-267	474606	5410009	180	-75	650
CR22-265	474403	5410013	180	-75	577
CR22-257	473644	5408751	355	-45	354

Mineral Resource Estimate										Contained Metal
DOMAIN	CLASS	TONNES (Mt)	Ni (%)	Co (%)	Fe (%)	Cr (%)	S (%)	Pd (g/t)	Pt (g/t)	Ni (kt)	Co (kt)	Fe (Mt)	Cr (kt)	S (kt)	Pd (koz)	Pt (koz)
MAIN	Indicated	81.3	0.25	0.011	5.2	0.24	0.056	0.0029	0.0045	201.8	8.6	4.2	193.6	45.6	7.7	11.8
MAIN	Inferred	357.5	0.25	0.011	5.2	0.23	0.063	0.0040	0.0053	885.4	38.0	18.6	835.4	224.9	45.7	60.6

1.	The independent Qualified Person for the Mineral Resource Estimate, as defined by NI 43-101, is Dr. Scott Jobin-Bevans (P.Geo., PGO #0183), of Caracle Creek International Consulting Inc. The effective date of the Mineral Resource Estimate is July 15, 2024.
2.	The quantity and grade of reported Inferred Resources in this Mineral Resource Estimate are uncertain in nature and there has been insufficient exploration to define these Inferred Resources as Indicated or Measured. However, it is reasonably expected that the majority of Inferred Mineral Resources could be upgraded to Indicated Mineral Resources with continued exploration.
3.	A cut-off grade of 0.10% Ni was used for the Main Domain (combined high- and low-grade estimated domains). Cut-offs were determined on the basis of core assay geostatistics and drill core lithologies for the deposit, and by comparison to analogous deposit types.
4.	Geological and block models for the Mineral Resource Estimate used data from a total of 22 surface drill holes, completed by CNC in 2022-2024. The drill hole database was validated prior to resource estimation and QA/QC checks were made using industry-standard control charts for blanks, core duplicates and commercial certified reference material inserted into assay batches by CNC and by comparison of umpire assays performed at a second laboratory.
5.	Estimates have been rounded to two significant figures.
6.	The Mineral Resource Estimate was prepared following the CIM Estimation of Mineral Resources & Mineral Reserves Best Practice Guidelines (November 29, 2019) and the CIM Definition Standards for Mineral Resources & Mineral Reserves (May 19, 2014).
7.	The geological model as applied to the Mineral Resource Estimate comprises three mineralized domains hosted by variably serpentinized ultramafic rocks: a relatively higher-grade core (dunite) and two, western and eastern, lower-grade envelopes (peridotite). Individual wireframes were created for each domain in Leapfrog Geo 2023.2.3 software.
8.	A 20 m x 20 m x 15 m block model was created, and samples were composited at 7.5 m intervals. Grade estimation from drill hole data was carried out for Ni, Co, Fe, Cr, S, Pd and Pt using the Ordinary Kriging interpolation method in Isatis 2024.04 software.
9.	The mineral resource estimates have been revised to include a conceptual pit envelope constraint that was developed using the following optimization parameters. Metal prices used were US$21,000/t nickel, US$40,000/t cobalt, US$325/t magnetite, US$1,350/oz palladium, and US$1,150/oz platinum. Different pit slopes were used for each layer (in degrees): 9.5 in clay, 11.6 in sand, and 45.0 in rock. Exchange rate utilized was US$/C$ at $0.75. Mining costs utilized different values for overburden (clay, gravel), selective mining, and bulk mining, ranging from C$1.62 to C$3.28/t mined. Processing costs and general and administration costs for a 60 ktpd operation (similar to the initial stage of Crawford) were C$8.40/t. Based on the range of grade and ratio of sulphur to nickel, calculated recovery averages 49% for Ni, 56% for Fe, 5% for Co and 21% for Pt and Pd.
10.	Grade estimation was validated by comparison of input and output statistics (Nearest Neighbour and Inverse Distance Squared methods), swath plot analysis, cross-plots of declustered samples against the nearest OK estimate, and by visual inspection of the assay data, block model, and grade shells in cross-sections.
11.	Density estimation was carried out for the mineralized domains using the Ordinary Kriging interpolation method, on the basis of 954 specific gravity measurements collected during the core logging process, using the same block model parameters of the grade estimation. As a reference, the average estimated density value within dunite is 2.62 g/cm ³ (t/m ³ ), while peridotite domains yielded averages of 2.69 g/cm ³ (t/m ³ ) in the west and 2.75 g/cm ³ (t/m ³ ) in the east.

Table 1: 111 Zone 2024 Results
Sample	Date	Area	X (UTM Z15)	Y (UTM Z15)	Description	Assay Certificate No.	Au ppb1 (Fire Assay)	Au ppb2 (Fire Assay)	Au ppb3 (Photon Assay)
C277089	2024-11-06	111 Zone area	676832	5380323	Strongly silicified mafic volcanic with 0.5% fine disseminated pyrite. Loose outcrop / frost heave.	A24-13987	2400	2670	2550
C277090	2024-11-06	111 Zone	676832	5380320	Strongly silicified mafic volcanic with 0.5-1% fine disseminated pyrite. Loose outcrop or frost heave adjacent to zone in outcrop, about 3m south of previous sample.	A24-13987	56300	56900	56800
C277091	2024-11-06	111 Zone	676818	5380332	Strongly silicified sericite schist. Angular boulder, likely talus from nearby slope.	A24-13987	48	n/a
C277043	n/a	n/a	n/a	n/a	Quartz pebble blank.	A24-13987		n/a	n/a
C277044	n/a	n/a	n/a	n/a	Standard OREAS 24d.	A24-13987		n/a	n/a

	Head Grades (%)			Recovery (%)				Concentrate Grades (%)
	Head Grades (%)			Recovery (%)				Ni Conc.		NiCr Conc.
	Ni	S	Fe	Ni	Co	Fe	Cr	Ni	Co	Fe	Cr	Ni
Actual	0.29	0.04	5.1	47	1	57	31	60	0.10	55	4.2	0.62
Modelled	-	-	-	43	4	58	28	40	0.23	55	3.7	0.72
Difference	-	-	-	+4	-3	-1	+3	+20	-0.13	0	+0.5	-0.10

	Head Grades (%)			Total Recoveries (%)				Recovery Performance (%) Actual - Modelled
	Head Grades (%)			Total Recoveries (%)				Recovery Performance (%) Actual - Modelled
Sample ID	Ni	S	Fe	Ni	Co	Fe	Cr	Ni	Co	Fe	Cr
CNS-001	0.17	0.03	6.9	55	1.5	60	14	17	-3	-3	-19
CNS-002	0.27	0.04	5.6	54	4.9	52	34	10	1	-4	5
CNS-003	0.26	0.01	5.3	23	0.5	44	28	-4.6	-4	-12	-1
CNS-005	0.27	0.09	5.7	71	5.2	49	28	14	-5	-3	0
CNS-006	0.30	0.05	5.5	67	4.7	61	35	17	1	6	6
CNS-007	0.28	0.04	5.5	43	0.7	59	32	-0.3	-3	4	4
CNS-008	0.18	0.01	7.5	36	1.1	55	31	7.9	-3	-8	0
CNS-009	0.27	0.01	5.2	33	2.0	47	29	5.0	-2	-16	-2
CNS-010	0.20	0.02	7.7	42	0.7	63	37	10	-3	3	8
CNS-011	0.16	0.03	7.4	60	1.5	61	20	23	-3	-1	-13
Average	0.23	0.03	6.2	48	2.3	55	29	10	-2	-3	-1

Canada Nickel Company Announces Assay Results and Confirms Discovery at Deloro Property

Latest News

Latest Press Releases

Related News

TOP STOCKS