The Conversation (0)
Outcropping Copper Gossan Delivers 33% Cu Assays At Morrissey Hill Project, Yinnetharra
HIGHLIGHTS
- High grade copper‐oxide mineralisation (malachite) confirmed at the Company’s Morrissey Hill Project, Yinnetharra with rock chip samples reporting highly encouraging assays of up to 33.2% Cu; 0.2 g/t Au and 141.8g/t Ag. (Figure 1).
- Results follow Morrissey Hill assays of up to 2.3% Li2O (ASX Announcement 15 May 2023).
- Mineralisation at the Swallowtail Copper Prospect was mapped over a strike length of at least 150m and remains open in all directions.
- Significant results include:
- 33.2% Cu, 0.2g/t Au and 141.8g/t Ag (23RRRK0039).
- 14.7% Cu, 0.02g/t Au and 55.6g/t Ag (23RRRK0042).
- 4.2% Cu, 0.3g/t Au and 5.7g/t Ag (23RRRK0041).
- 2.3% Cu, 0. 2g/t Au and 5.0g/t Ag (23RRRK0043).
- Historical sampling 3.0km’s west of Swallowtail could potentially extend the strike with historical results returned:
- 18.5% Cu, 1.1g/t Au and 6.8g/t Ag
- 18.5% Cu, 1.1g/t Au and 6.8g/t Ag
- The rock chip results confirm the Company’s targeting methodology and the potential of the area to host significant mineralisation.
- Morrissey has never been drilled & geochemical surveys planned to commence next week.
Commenting on the results CEO Jeremy Bower said:
“The Morrissey Hill tenement at our Yinnetharra Project continues to deliver. These are outstanding copper results and in conjunction with the 2.3% Li20 announced earlier this week, it is clear how prospective the ground is. We’re focused on sourcing the critical and battery minerals of the future and copper is an important part of our strategy. Despite several world class copper‐gold and polymetallic base metal deposits in the East Capricorn Orogen, the West Capricorn and Gascoyne has been massively under‐ explored. We see this as a huge opportunity.
Importantly, we are fully funded to complete our field programs and drilling campaigns earmarked for this year. Our focus remains on thorough geochemical assessment of each target and getting drill rigs out to Morrissey Hill as soon as possible. This will mean consistent news flow for our shareholders over the coming months.”
FIGURE 3: Morrissey Hill showing location of the Swallowtail Prospect along Stringer Fault line
FIGURE 4: Regional location of Reach Yinnetharra projects
The rock chip results confirm the Company’s targeting methodology and the potential of the area to host significant mineralisation. Systematic surface geochemical surveys including soils, stream sediment and rock chip sampling are planned to commence immediately. Results from this work will guide follow up programs which if warranted may include electromagnetic geophysical surveys and drill testing of priority targets.
The results were reported from an outcropping quartz‐veined gossan, the Swallowtail Prospect, showing visible malachite (copper‐oxide) over a strike length of approximately 150m. The gossan strikes east‐ west, appears to dip steeply towards the south and remains open in both directions. A single historical sample located some 3.0km’s west of Swallowtail, and within the same structural corridor, also reported high grade copper, gold and silver assays indicating a potential strike length of the target zone in excess of 3km’s (Refer to Figure 3).
Click here for the full ASX Release
This article includes content from Reach Resources, licensed for the purpose of publishing on Investing News Australia. This article does not constitute financial product advice. It is your responsibility to perform proper due diligence before acting upon any information provided here. Please refer to our full disclaimer here.
Multiple New Lithium (LCT) Pegmatite Targets Confirmed
HIGHLIGHTS
- Independent geological experts RSC consultants have identified four priority target areas for Lithium-Caesium-Tantalum (“LCT”) Pegmatites within the Company’s Critical Elements Projects, located in the centre of the rapidly developing Gascoyne “Battery Metals” Province, WA
- Each of the target areas are associated with confirmed fertile parental granites of the Thirty Three and Durlacher Supersuites and contain the same metasedimentary sequences which host Red Dirt Metals (ASX: RDT) Yinnetharra Lithium Project, less than 10 km’s to the NE of Reach Resources’ tenure
- All of the targets are defined by favourable geology, multi-element pathfinder geochemistry and the presence of mapped Geological Society of Western Australia (GSWA) Tin, Tantalum and Lithium pegmatites
- A helicopter supported field reconnaissance program has been initiated to assess the priority areas in more detail
- Drilling of priority targets is scheduled to commence in CY Q3/4 2023 once all regulatory approvals are received
CEO Jeremy Bower commented:
“RSC’s independent expert analysis confirms our belief that our landholding in the Gascoyne has the potential to host significant battery metal deposits.
Phase 1 of the assessment focused on the lithium potential at our Critical Elements Projects and has not only cemented Morrissey Hill as our primary lithium target but importantly has identified three new lithium target areas. Each of the areas are defined by the presence of a highly fertile parent granite and supported by key multi-element geochemistry including lithium, caesium, tantalum, tin and rubidium which are all well documented associations of lithium bearing “rare metal” LCT pegmatite mineral systems.
This is an exciting time for the Company and our shareholders, and we look forward to delivering updates to the market over the coming months. The Future is within Reach”.
Phase 1 of the assessment focused on the lithium potential of the Company’s Critical Elements Projects which includes the newly acquired Morrissey Hill and Camel Hill projects as well as the Wabli Creek project (Figure 1).
Figure 1: Critical Elements Projects
The assessment included a review of relevant deposit models and mineralisation styles of interest, regional and local geology, local mineral systems, academic papers, open file company and government reports and all available geochemical, geophysical and remote-sensed data sets.
Click here for the full ASX Release
This article includes content from Reach Resources, licensed for the purpose of publishing on Investing News Australia. This article does not constitute financial product advice. It is your responsibility to perform proper due diligence before acting upon any information provided here. Please refer to our full disclaimer here.
Drilling Commenced at Viani in Fiji
HIGHLIGHTS
- The Phase 1, three-hole diamond drilling program has commenced at the Viani Project, Fiji and will test for extensions to the quartz vein gold mineralisation at depth.
- Phase 1 is expected to be completed in early 2025, with plans for additional drilling under the same program dependent on the initial results
- The Viani Project (SPL1513) covers an area of approximately 200km2 and is largely underexplored.
- At the Dakuniba prospect within Viani, low sulphidation epithermal high-grade gold mineralisation has been mapped over >3km strike length.
- Diamond drilling completed by Japan International Cooperation Agency (JICA) in 1995 to 1997 intersected high-grade gold in low sulphidation epithermal quartz veins, including 0.6m @ 27.6 g/t Au.
Alice Queen’s Managing Director, Andrew Buxton said,
With drilling underway, Alice Queen is positioned to test the epithermal gold-style mineralisation identified in historic drilling at the Viani Project. Weather permitting, we anticipate completing the Phase 1, three-hole diamond drilling program in early 2025. Following this, our exploration team will mobilise the drill rig to the Sabeto Project in Fiji to maintain the momentum of this campaign. To deliver timely results to shareholders, we intend to accelerate the analysis of the drill core at ALS Brisbane.”
Image 1 – Diamond drilling at Viani
Details
Geology
The geology of the Viani Project (SPL 1513) comprises olivine basalts and volcaniclastics of the Natewa Volcanic Group which are intruded by andesite sills and dykes. In the 1940s, gold mineralisation was found by local prospectors near the village of Dakuniba. At Dakuniba, low sulphidation style epithermal gold occurs in quartz veins, and silicified rocks along a 3km long NE trending zone.
In 1995-1997, Japan International Cooperation Agency (JICA) drilled six diamond holes at Dakuniba and intersected high-grade gold in chalcedonic, crustiform, colloform banded quartz veins at depths of 50m to 100m below surface (i.e. MJVFV-5 intersected 2.2m @ 11.3 g/t Au, incl 0.6m @ 27.6 g/t Au at 121m downhole). This high-grade gold mineralisation is open in all directions.
Proposed Drill program
The initial Phase 1 drill program at Viani (see Table 1) will comprise three diamond drillholes designed to test continuity to the epithermal gold mineralisation previously intersected in JICA drillhole MJVFV- 5 (2.2m @ 11.3 g/t Au) (see Figure 2). The drilling will test for extensions to the gold mineralisation at depth and along strike.
Click here for the full ASX Release
This article includes content from Alice Queen Limited, licensed for the purpose of publishing on Investing News Australia. This article does not constitute financial product advice. It is your responsibility to perform proper due diligence before acting upon any information provided here. Please refer to our full disclaimer here.
Maiden Drill Program Set to Commence at the High-Priority Cangallo Porphry Copper Project
- Maiden RC drill program to commence at Cangallo in mid-December
- Program will test a large-scale, undrilled porphyry copper target
- Assay results expected around the end of January 2025
- Permitting underway for drill programs across other high-priority, large-scale porphyry copper targets at Lantana and Playa Kali
Access and drill pad preparations have commenced with drilling scheduled to start around mid-December. The planned program, which comprises a minimum of eight drill-holes for a total of ~2,500m, will take 3 to 4 weeks to complete with assay results expected around the end of January 2025.
Figure 1: Cangallo Porphyry Copper Prospect showing copper and molybdenum values and permitted drill sites.
Geological mapping and rock-chip sampling has outlined a partially exposed potential copper (+/- gold) porphyry system, within a large-scale (3km x 2km) caldera-like structure containing extensive colluvial and younger sediment cover.
The initial drilling program will test areas containing relatively intense veining (quartz) and porphyritic dykes, where higher copper (up to 0.65% Cu) and gold (up to 0.3g/t Au) values have been found. The possibility of a buried porphyry copper system beneath the extensive cover within the interpreted caldera-like structure will also be tested.
Cangallo is located close to significant infrastructure and is approximately 25km from the town of Chala, and within 10km of the coast.
Commenting on the imminent commencement of drilling at Cangallo, AusQuest’s Managing Director, Graeme Drew, said:
“This is a very exciting time for the Company as we are about to commence the maiden drill program at this high-priority porphyry copper target in Peru which we have been working towards for over 12 months.
Cangallo has never been drilled before and demonstrates classic geochemical and alteration signatures which suggest there is significant potential to discover large-scale copper porphyry mineralisation.
Success at Cangallo has potential to create significant value for our shareholders and we look forward to keeping our shareholders updated as the results become available.”
Click here for the full ASX Release
This article includes content from AusQuest limited, licensed for the purpose of publishing on Investing News Australia. This article does not constitute financial product advice. It is your responsibility to perform proper due diligence before acting upon any information provided here. Please refer to our full disclaimer here.
