The Conversation (0)
Reach Resources Limited (ASX: RR1 & RR1O) (“Reach” or “the Company”) is pleased to advise that multiple stacked pegmatites1 over substantial widths have been intersected at the Bonzer Prospect within the Company’s 100% owned Morrissey Hill Lithium Project, Yinnetharra WA.
HIGHLIGHTS
- Phase 1 drilling has intersected multiple thick, stacked pegmatites1 at the Bonzer Prospect within the Company’s 100%‐owned Morrissey Hill Lithium Project, Yinnetharra WA.
- Target pegmatite units have been intersected in every hole drilled, with individual drill intercepts up to 30m in length.
- RC drilling has been designed to test near surface extents of outcropping pegmatites while deeper diamond holes are testing for continuity at depth.
- Diamond drill cores show multiple pegmatite intersections which is highly encouraging and consistent with the geology at neighbouring Delta Lithium’s (ASX: DLI) Malinda Lithium Project.
- First round of assays eagerly expected in early October 2023.
- Following encouraging visual expressions1, the Company is undertaking additional diamond drilling, prior to the commencement of cattle mustering activities in the area.
Figure 1: Late night diamond drilling at the Bonzer Prospect, Morrissey Hill Lithium Project. Diamond Drillhole 23MHD03
Importantly, target pegmatite units have been intersected in every hole drilled, with individual drill intercepts ranging from 1m to 30m in length. Consistent with Delta Lithium’s Malinda Lithium Project located immediately to the east of Morrissey Hill, drilling at the Bonzer Prospect has confirmed the presence of multiple stacked pegmatites1 to depths of ~400m (down hole). In addition, at least one of the larger pegmatites intersected at depth appears to be “blind” (i.e., no pegmatite or anomalous assays present at surface) which opens up a potential new target for future drill testing.
Jeremy Bower CEO commented:
“The extensive soil sampling campaign conducted at Morrissey Hill prior to the commencement of drilling is paying dividends. We are very happy to confirm that the outcropping pegmatites are being repeated with substantial widths at depth within the right host rocks.
In addition, diamond drill core is confirming blind pegmatites exist in the area, which is extremely promising and consistent with the geology at neighbouring Delta Lithium’s (ASX: DLI) Malinda Lithium Project.
We’re pushing hard to gather as much information as we can prior to the commencement of Yinnetharra Station’s annual cattle mustering program which will see our Phase 1 drilling campaign take a break on the 10th of September. Our geological team has worked incredibly hard, and we are extremely happy with what we are seeing. We will get some extra metres drilled to what was previously planned before mustering commences and we head back to Perth. We eagerly await assays in early to mid‐October. The Future is within Reach.
Exciting times ahead.”
Operations Update
Maiden Phase 1 RC drilling has been concluded with twenty‐one (21) holes drilled for a total of 2,656m including pre‐collars for diamond holes.
Diamond drilling continues with four (4) holes complete to date for ~1072m.
Drilling has confirmed the presence of multiple pegmatites in each hole with individual intercepts ranging from 1m to more than 30m in length. The pegmatites occur within a variety of host rock types including granites, and sediments/mafic units interpreted as being a part of the Leake Springs Metamorphics Group. Importantly these are the same rocks which host the Malinda Lithium Deposit pegmatites located 8km along strike to the east of Morrissey Hill.
The Company’s maiden Phase 1 drilling campaign has been focussed on a 500m long section of the west‐ central portion of the Bonzer pegmatite field which extends for over 2km’s in strike length (Figure 2). The potential of the area to host significant lithium mineralisation was highlighted by the results from earlier surface sampling conducted by RR1 which returned soil values in excess of 750ppm Li20 (ASX Announcement 9 August 2023) and rock chip values of up to 2.3% Li2O, 4295ppm Caesium and 705.8ppm Tantalum (ASX Announcement 15 May 2023).
Click here for the full ASX Release
This article includes content from Reach Resources, licensed for the purpose of publishing on Investing News Australia. This article does not constitute financial product advice. It is your responsibility to perform proper due diligence before acting upon any information provided here. Please refer to our full disclaimer here.
RR1:AU
Outcropping Copper Gossan Delivers 33% Cu Assays At Morrissey Hill Project, Yinnetharra
HIGHLIGHTS
- High grade copper‐oxide mineralisation (malachite) confirmed at the Company’s Morrissey Hill Project, Yinnetharra with rock chip samples reporting highly encouraging assays of up to 33.2% Cu; 0.2 g/t Au and 141.8g/t Ag. (Figure 1).
- Results follow Morrissey Hill assays of up to 2.3% Li2O (ASX Announcement 15 May 2023).
- Mineralisation at the Swallowtail Copper Prospect was mapped over a strike length of at least 150m and remains open in all directions.
- Significant results include:
- 33.2% Cu, 0.2g/t Au and 141.8g/t Ag (23RRRK0039).
- 14.7% Cu, 0.02g/t Au and 55.6g/t Ag (23RRRK0042).
- 4.2% Cu, 0.3g/t Au and 5.7g/t Ag (23RRRK0041).
- 2.3% Cu, 0. 2g/t Au and 5.0g/t Ag (23RRRK0043).
- Historical sampling 3.0km’s west of Swallowtail could potentially extend the strike with historical results returned:
- 18.5% Cu, 1.1g/t Au and 6.8g/t Ag
- 18.5% Cu, 1.1g/t Au and 6.8g/t Ag
- The rock chip results confirm the Company’s targeting methodology and the potential of the area to host significant mineralisation.
- Morrissey has never been drilled & geochemical surveys planned to commence next week.
Commenting on the results CEO Jeremy Bower said:
“The Morrissey Hill tenement at our Yinnetharra Project continues to deliver. These are outstanding copper results and in conjunction with the 2.3% Li20 announced earlier this week, it is clear how prospective the ground is. We’re focused on sourcing the critical and battery minerals of the future and copper is an important part of our strategy. Despite several world class copper‐gold and polymetallic base metal deposits in the East Capricorn Orogen, the West Capricorn and Gascoyne has been massively under‐ explored. We see this as a huge opportunity.
Importantly, we are fully funded to complete our field programs and drilling campaigns earmarked for this year. Our focus remains on thorough geochemical assessment of each target and getting drill rigs out to Morrissey Hill as soon as possible. This will mean consistent news flow for our shareholders over the coming months.”
FIGURE 3: Morrissey Hill showing location of the Swallowtail Prospect along Stringer Fault line
FIGURE 4: Regional location of Reach Yinnetharra projects
The rock chip results confirm the Company’s targeting methodology and the potential of the area to host significant mineralisation. Systematic surface geochemical surveys including soils, stream sediment and rock chip sampling are planned to commence immediately. Results from this work will guide follow up programs which if warranted may include electromagnetic geophysical surveys and drill testing of priority targets.
The results were reported from an outcropping quartz‐veined gossan, the Swallowtail Prospect, showing visible malachite (copper‐oxide) over a strike length of approximately 150m. The gossan strikes east‐ west, appears to dip steeply towards the south and remains open in both directions. A single historical sample located some 3.0km’s west of Swallowtail, and within the same structural corridor, also reported high grade copper, gold and silver assays indicating a potential strike length of the target zone in excess of 3km’s (Refer to Figure 3).
Click here for the full ASX Release
This article includes content from Reach Resources, licensed for the purpose of publishing on Investing News Australia. This article does not constitute financial product advice. It is your responsibility to perform proper due diligence before acting upon any information provided here. Please refer to our full disclaimer here.
Multiple New Lithium (LCT) Pegmatite Targets Confirmed
HIGHLIGHTS
- Independent geological experts RSC consultants have identified four priority target areas for Lithium-Caesium-Tantalum (“LCT”) Pegmatites within the Company’s Critical Elements Projects, located in the centre of the rapidly developing Gascoyne “Battery Metals” Province, WA
- Each of the target areas are associated with confirmed fertile parental granites of the Thirty Three and Durlacher Supersuites and contain the same metasedimentary sequences which host Red Dirt Metals (ASX: RDT) Yinnetharra Lithium Project, less than 10 km’s to the NE of Reach Resources’ tenure
- All of the targets are defined by favourable geology, multi-element pathfinder geochemistry and the presence of mapped Geological Society of Western Australia (GSWA) Tin, Tantalum and Lithium pegmatites
- A helicopter supported field reconnaissance program has been initiated to assess the priority areas in more detail
- Drilling of priority targets is scheduled to commence in CY Q3/4 2023 once all regulatory approvals are received
CEO Jeremy Bower commented:
“RSC’s independent expert analysis confirms our belief that our landholding in the Gascoyne has the potential to host significant battery metal deposits.
Phase 1 of the assessment focused on the lithium potential at our Critical Elements Projects and has not only cemented Morrissey Hill as our primary lithium target but importantly has identified three new lithium target areas. Each of the areas are defined by the presence of a highly fertile parent granite and supported by key multi-element geochemistry including lithium, caesium, tantalum, tin and rubidium which are all well documented associations of lithium bearing “rare metal” LCT pegmatite mineral systems.
This is an exciting time for the Company and our shareholders, and we look forward to delivering updates to the market over the coming months. The Future is within Reach”.
Phase 1 of the assessment focused on the lithium potential of the Company’s Critical Elements Projects which includes the newly acquired Morrissey Hill and Camel Hill projects as well as the Wabli Creek project (Figure 1).
Figure 1: Critical Elements Projects
The assessment included a review of relevant deposit models and mineralisation styles of interest, regional and local geology, local mineral systems, academic papers, open file company and government reports and all available geochemical, geophysical and remote-sensed data sets.
Click here for the full ASX Release
This article includes content from Reach Resources, licensed for the purpose of publishing on Investing News Australia. This article does not constitute financial product advice. It is your responsibility to perform proper due diligence before acting upon any information provided here. Please refer to our full disclaimer here.
EIS Grant for Minnie Springs Copper Porphyry Drilling
- Augustus Minerals has been granted a co-funded drilling grant of up to $110,000 for 2 x 700m deep diamond drill holes under the WA Government’s Exploration Incentive Scheme (EIS) for the Minnie Springs prospect.
- The deeper diamond drill program is designed to test and to provide a 550m deep, 1km wide geological/geochemical/structural cross-section through the large 3km long by 1km wide copper moly porphyry system, linking the Mo mineralised leucogranite to the extensive Cu in soil anomaly to the northeast.
- Previous RC drilling at Minnie Springs intersected mineralisation, geology and alteration halo consistent with the zoning of a large porphyry copper / moly system.
Andrew Ford, GM Exploration
“The Company is pleased to receive an EIS grant to complete deeper drilling at the Minnie Springs Copper Molybdenum Project. The resultant data will enable mapping of the lithology and alteration to a depth of 550m and potentially intersect, or provide vectors to, higher grade Mo-Cu mineralisation using a Mo-Cu porphyry geological model”.
Minnie Springs
Minnie Springs hosts porphyry related copper molybdenum mineralisation previously drilled and defined by Catalyst Metals. A molybdenum Exploration target has been defined for the historicdrillingareacomprisedofbetween12-84Mtasoutlinedbelow (Table 1 and Figure 1, 2.)1.
Table 1. Exploration target size estimate for Minnie Springs Molybdenum depositNote: Based on ~300 ppm cut-off at 100% recovery.
The potential quantity and grade of the exploration target is conceptual in nature, there has been insufficient exploration to estimate a Mineral Resources, and it is uncertain if further exploration will result in the estimation of a Mineral Resource.
The planned diamond drilling will complement the recently completed 3,200m RC drilling program that infilled around hole MSRC012 (18m @ 0.37% Cu and 9.7 g/t Ag from 94m downhole, and 16m @ 0.38% Cu and 19.4g/t Ag from 121m downhole2) and tested the northern half of the 2km long copper-in soil anomaly. Assays from this program are expected to become available over the next month.
The limited exploration in the region, highlighted by 95% of the Ti-Tree project having no previous exploration, demonstrates the prospectivity of this underexplored mineral province.
Click here for the full ASX Release
This article includes content from Augustus Minerals, licensed for the purpose of publishing on Investing News Australia. This article does not constitute financial product advice. It is your responsibility to perform proper due diligence before acting upon any information provided here. Please refer to our full disclaimer here.
Quarterly Activity Report 31 March 2024
Figure 1. Fiery Creek Copper Prospect/Yataga Granodiorite summarizing rock (brown diamonds) and termite mound sample results (black crosses)
Continuing with its primary exploration focus on the Georgetown project in the latter half of 2023, EMU received assay results during the quarter from its second, in field reconnaissance work. The geochemical sampling programme covered the Fiery Creek high grade copper vein swarm and the Snake Creek prospects with significant element results returned from the Fiery Creek Copper (elevated Cu-Au-Ag-Bi-In-Pb-Sb-Te) and Snake Creek (elevated Pb-Ag-Au-Sb).
Whilst the survey was cut short due to inclement weather, EMU was encouraged by the significant success reflected in the assays results. The results from mineralogical studies confirmed EMU’s interpretation of an indicative, scale Copper-Porphyry system at the Fiery Creek prospect and was a highlight of the survey with new information building on the scale and potential of the prospect1.
Assay results returned included:
- Fiery Creek rock assay results up to 23.5% Cu, 0.27ppm Au, 460ppm Ag, 1.9% Bi, 89ppm In, 2.7% Pb, 667ppm Sb, 1470ppm Zn2.
- evidence of strong potential for the presence of critical and strategic minerals (Cu, Bi, In), with precious and base metals.
- evidence of alteration mineralogy, mineralisation geochemistry and areal extent of the Fiery Creek quartz-Cu-Bi vein swarm strongly suggesting a previously unrecognised subjacent porphyry Cu-Mo system.
- Yataga Granitoid Complex termite mound and coincident rock chip sampling returned several anomalous polymetallic zones for follow up.
- Snake Creek Prospect assays returned 0.20ppm Au, 390ppm Ag, 22.4% Pb, 464ppm Sb1.
Significant results were returned from the Fiery Creek Copper prospect with elevated Cu-Au- Ag-Bi-In-Pb-Sb-Te and from the Snake Creek prospect with elevated Pb-Ag-Au-Sb.
The elevated pathfinder element results and a macro-petrology assessment3 of rock samples completed by Mr Nigel Maund, Consulting Economic Geologist, from the previously unexplored Fiery Creek Prospect, point to the discovery of a porphyry copper system.
The sampling program assessed a number of high-priority prospects within the Georgetown Project tenements utilising termite mound and outcrop rock chip geochemistry. A total of 46 rock chip and 489 termite mound samples were collected across eight prospects.
Click here for the full ASX Release
This article includes content from EMU NL, licensed for the purpose of publishing on Investing News Australia. This article does not constitute financial product advice. It is your responsibility to perform proper due diligence before acting upon any information provided here. Please refer to our full disclaimer here.
Basin Energy Mining Exploration Entity or Oil and Gas Exploration Entity Quarterly Cash Flow Report
Click here for the full ASX Release
This article includes content from Basin Energy, licensed for the purpose of publishing on Investing News Australia. This article does not constitute financial product advice. It is your responsibility to perform proper due diligence before acting upon any information provided here. Please refer to our full disclaimer here.