Grid Battery Metals Files NI 43-101 Technical Report on its Clayton Valley Lithium Project in Nevada

(TheNewswire)

Grid Battery Metals Inc. (the "Company" or "Grid Battery") ( TSXV:CELL ) ( OTC:EVKRF ) ( FRA:NMK2 ) is pleased to announce that the NI 43-101 Technical Report for Grid's Clayton Valley Lithium Project, dated March 4, 2024, prepared by Mr. Steven McMillin P.G. of Rangefront Geological, has been filed on SEDAR+ (www.sedarplus.ca) and can be viewed on the Company's website at Clayton Valley Technical Report

At the Clayton Valley Lithium Project, the Company contracted the services of Rangefront to perform an updated and revised NI 43-101 Technical Report. To complete the Technical Report, the Company used the results of prior soil samples, geophysical surveys, and drilling on the property, to help identify structure and target areas favorable to lithium accumulation and determine next steps for its overall exploration plan. The recommended 2024 exploration plan includes additional CSAMT geophysical survey work, additional soil sampling, and a subsequent multi-hole exploratory drilling program on the property.

Mr. Tim Fernback Grid President & CEO comments "We are happy to report the filing of the NI 43-101 Technical Report on our Clayton Valley Lithium Project. The recommendation for future exploration ultimately includes a drilling program as a logical next step here on the property. The timing is good for the Company, and with approximately CAD$7.0 million in our treasury, we are well-positioned and fully funded for our 2024 exploration season."

Mr. Fernback continues " Clayton Valley holds the only producing lithium brine system in the United States and holds amazing potential for lithium clay-hosted deposits . Our lithium claims in Clayton Valley are bordering the Silver Peak Lithium Project of Albemarle Corporation ( NYSE: ALB ), home to the only producing lithium mine in North America. Previously, Albemarle Corporation announced that it will continue to invest in its Silver Peak mine in order to double lithium production by the year 2025. Another neighbour of ours to the east, Century Lithium Corp. ( TSXV: LCE OTCQX: CYDVF ), has issued a pre-feasibility study referencing a 26% after-tax internal rate of return and an NPV 8 of $1.03 billion. Furthermore in May 2023, Nevada was ranked again as the #1 Mining Jurisdiction in the world by the Fraser Institute, a position it has held several times in the recent past. Our plan at Grid is to realize the potential of this area of Nevada for lithium-hosted brine and claystone for our shareholders. "

Clayton Valley Property

It should be noted that results from any adjacent property(s) are not an indication of what may be found on the Company's property(s).

About Rangefront Geological

Elko Nevada-based Rangefront Geological has combined in-depth expertise with cutting-edge technology to provide mining consulting services, contract labor, field crew services, and vehicular support to the mining industry. With services available across North America, Rangefront works closely with its clients to provide high-quality mineral exploration services.

Qualified Person

Mr. Steven McMillin, P.G. is a Qualified Person as defined by National Instrument 43-101 and has approved the technical information contained within this news release.

About Grid Battery Metals Inc.

Grid Battery Metals Inc. is a Canadian based exploration company whose primary listing is on the TSX Venture Exchange. The Company's maintains a focus on exploration for high value battery metals required for the electric vehicle (EV) market.

www.gridbatterymetals.com .

About Texas Springs Property

The Company owns a 100% interest in the Texas Spring Property which consists of mineral lode claims located in Elko County, Nevada. The Property is in the Granite Range southeast of Jackpot, Nevada, about 73 km north-northeast of Wells, Nevada. The target is a lithium clay deposit in volcanic tuff and tuffaceous sediments of the Humbolt Formation. A Phase 1 exploration program at the Texas Springs Property (Fall 2023) yielded r esults with average lithium grades of 2010 ppm, applying a 1,000 ppm cut-off, and up to 5,610 ppm Lithium .

The Texas Spring property adjoins the southern border of the Nevada North Lithium Project - owned by Surge Battery Metals Inc. ("Surge") (TSXV: NILI, OTC: NILIF) and comprised of 725 mineral claims. Surge's first round of drilling identified strongly mineralized lithium bearing clays. The average lithium content within all near surface clay zones intersected in the 2022 drilling program, applying a 1000 ppm cut-off, was 3254 ppm. (Press release March 29, 2023 ). More recent results have shown higher grade lithium up to 8070 ppm on this property after initial drilling (Press release September 12, 2023 ). Our exploration results are on-trend with these results.

About Clayton Valley Lithium Project

The Company owns a 100% interest in 113 lithium lode and placer claims covering over 640 hectares in Clayton Valley. Clayton Valley is a down-dropped closed basin formed by the Miocene age Great Basin extension and is still active due to movement along the Walker Lane structural zone. As a result, the basin has preserved multiple layers of lithium bearing volcanic ash, resulting from multiple eruptive events over the past 6 million years including eruptions from the 700,000-year-old Long Valley Caldera system and related events. These ash layers are thought to contribute to the lithium brines extracted by Albemarle and are also likely involved in the formation of the exposed lithium rich clay deposits on the east side of Clayton Valley.

Volt Canyon Lithium Property

The Company owns a 100% interest in 80 placer claims covering approximately 635 hectares of alluvial sediments and clays located 122 km northeast of Tonopah, Nevada.

About the British Columbia, Nickel Projects

The Mount Sidney Williams Group consists of three claim blocks with a total area of 10,569 hectares in the area surrounding Mount Sidney Williams, both adjoining and near the Decar project of FPX Nickel Corp., located 100 kilometres northwest of Fort St. James, B.C., in the Omineca mining division. Metallic mineralization includes nickel, cobalt, and chromium. At least some of the nickel mineralization occurs as awaruite. The Mitchell Range Group area claim consists of one claim block covering 8,659 hectares with demonstrated metallic mineralization including nickel, cobalt, and chromium. Nickel cobalt mineralization has not been well explored, but the presence of awaruite has been documented. The Company's B.C. Nickel properties are held within Grid's wholly-owned subsidiary, AC/DC Battery Metals Inc.

The Company has previously announced plans to spin out its wholly-owned subsidiary, AC/DC Battery Metals Inc., finance it separately, and separately list it on the TSX Venture Exchange in 2024. This transaction once complete, will provide a valuable share dividend to each Grid Shareholder of record for no additional cost.

On Behalf of the Board of Directors

"Tim Fernback"

Tim Fernback, President & CEO

Contact Information:

Email: info@gridbatterymetals.com

Phone: 604- 428-5690

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release. This news release may contain forward-looking statements which include, but are not limited to, comments that involve future events and conditions, which are subject to various risks and uncertainties. Except for statements of historical facts, comments that address resource potential, upcoming work programs, geological interpretations, receipt and security of mineral property titles, availability of funds, and others are forward-looking. Forward-looking statements are not guarantees of future performance and actual results may vary materially from those statements. General business conditions are factors that could cause actual results to vary materially from forward-looking statements. It should be noted that results from any adjacent property(s) are not an indication of what may be found on the Company's property(s).

News Provided by TheNewsWire via QuoteMedia

tsxv:cell cell:cc base metals investing Base Metals Investing

CELL:CC

Grid Battery Metals Update - Fall 2024 Drilling Results on its Clayton Valley Lithium Project

(TheNewswire)

Coquitlam, BC TheNewswire - January 21, 2025 - Grid Battery Metals Inc. (the "Company" or "Grid") ( TSXV: CELL, OTCQB: EVKRF FRA: W47 ) is pleased to announce the results of its fall 2024 reverse circulation drilling program on the Company's claim block at Silver Peak, Clayton Valley, Esmeralda County, Nevada. This strategic land package, covering approximately 2,300 acres (930 ha), directly adjoins the western portion of lithium producer Albemarle's (NYSE: ALB) evaporation ponds and is nearby Century Lithium Corp.'s (TSXV: LCE) (OTCQB: CYDVF) proposed 5,430-acre Angel Island Lithium Mine, which recently released a Positive Feasibility Study detailing a 40-year mine life and an after-tax NPV8 of $3.01 billion .

News Provided by TheNewsWire via QuoteMedia

Keep reading...Show less

Grid Battery Metals Update - Drilling Completed on its Clayton Valley Lithium Project

Grid Battery Metals Inc. (the "Company" or "Grid") (TSXV: CELL)(OTCQB:EVKRF)(FRA:W47) is pleased to announce that its reverse circulation drilling program has now been completed on the Company's claim block at Silver Peak, Clayton Valley, Esmeralda County, Nevada. This strategic land package, covering approximately 2,300 acres (930 ha), directly adjoins the western portion of lithium producer Albemarle's (NYSE:ALB) evaporation ponds and is nearby Century Lithium Corp.'s (TSXV:LCE)(OTCQB:CYDVF) proposed 5,430-acre Angel Island Lithium Mine, which recently released a Positive Feasibility Study detailing a 40-year mine life and an after-tax NPV8 of $3.01 billion

Mr. Tim Fernback, Company President and CEO comments "Now that our fall drilling program at our Clayton Valley Lithium Project has been successfully completed, we are eagerly awaiting the lithium assay results from the lab. One of the stated goals of the planned drilling program was to test the depth of the accumulated lithium brine and claystones on our property. With this knowledge, we can propose a significant follow-on exploration program that will work towards an eventual maiden resource calculation and NI# 43-101 Preliminary Economic Assessment. We remain very excited about this opportunity in Nevada for our company and shareholders."

News Provided by ACCESSWIRE via QuoteMedia

Keep reading...Show less

Grid Battery Metals Drilling Update on its Clayton Valley Lithium Project

(TheNewswire)

Coquitlam, BC September 26, 2024 TheNewswire Grid Battery Metals Inc. (the "Company" or "Grid") ( TSXV: CELL, OTCQB: EVKRF FRA: W47 ) is pleased to announce that a reverse circulation drilling program is well under way on the Company's claim block at Silver Peak, Clayton Valley, Esmeralda County, Nevada. This strategic land package, covering approximately 2,300 acres (930 ha), directly adjoins the western portion of lithium producer Albemarle's (NYSE: ALB) evaporation ponds and is nearby Century Lithium Corp.'s (TSXV: LCE) (OTCQB: CYDVF) proposed 5,430-acre Angel Island Lithium Mine. The Company has completed the drilling of its first hole to a depth of over 870 feet, with the remaining drill holes proposed to a maximum depth of 1500 feet.

News Provided by TheNewsWire via QuoteMedia

Keep reading...Show less

Grid Battery Metals Begins Drilling the Clayton Valley Lithium Project

(TheNewswire)

Coquitlam, BC TheNewswire - September 12, 2024 - Grid Battery Metals Inc. (the "Company" or "Grid") ( TSXV: CELL, OTCQB: EVKRF FRA: NMK2 ) is pleased to announce that a reverse circulation drilling program is commencing on the Company's claim block at Silver Peak, Clayton Valley, Esmeralda County, Nevada. This strategic land package, covering approximately 2,300 acres (930 ha), directly adjoins the western portion of lithium producer Albemarle's (NYSE: ALB) evaporation ponds and is nearby Century Lithium Corp.'s (TSXV: LCE) (OTCQB: CYDVF) proposed 5,430-acre Angel Island Lithium Mine. The Company plans to drill several exploration holes to maximum depths of 1500 ft. in several strategic locations on the property during the month of September.

News Provided by TheNewsWire via QuoteMedia

Keep reading...Show less

WESTERN COPPER AND GOLD STRENGTHENS STRATEGIC PARTNERSHIP WITH MITSUBISHI MATERIALS

western copper and gold corporation ("Western" or the "Company") (TSX: WRN) (NYSE American: WRN) is pleased to announce that it has strengthened its relationship with Mitsubishi Materials Corporation ("Mitsubishi Materials").

Western has entered into an amended and restated investor rights agreement (the "Agreement") with Mitsubishi Materials, most notably extending the rights and obligations thereunder until May 30, 2026 , subject to Mitsubishi Materials acquiring 2 million common shares of the Company through open market purchases. These purchases will be non-dilutive to existing shareholders, as no new shares will be issued by the Company. Upon completion, Mitsubishi Materials' equity ownership in Western is expected to return to approximately 5%.

"Mitsubishi Materials have been a supportive partner, and we are pleased to see them grow their ownership in Western," said Sandeep Singh , President and CEO. "Their continued support through this proposed new investment, made through non-dilutive, open market purchases, is another vote of confidence in the team and the Casino Project. The corresponding extension of rights reflects the productive and aligned relationship we've built, and we look forward to continuing to collaborate as we advance one of Canada's most important critical minerals projects."

ABOUT western copper and gold corporation

western copper and gold corporation is developing the Casino Project, Canada's premier copper-gold mine in the Yukon Territory and one of the most economic greenfield copper-gold mining projects in the world.

The Company is committed to working collaboratively with our First Nations and local communities to progress the Casino Project, using internationally recognized responsible mining technologies and practices.

For more information, visit www.westerncopperandgold.com .

On behalf of the board,

"Sandeep Singh"

Sandeep Singh
President and CEO
western copper and gold corporation

Cautionary Note Regarding Forward-Looking Statements

This news release includes certain "forward-looking information" and "forward-looking statements" (collectively "forward-looking statements") within the meaning of applicable Canadian and United States securities legislation including the United States Private Securities Litigation Reform Act of 1995. These forward-looking statements are made as of the date of this news release. Forward-looking statements are frequently, but not always, identified by words such as "expects", "anticipates", "believes", "plans", "projects", "intends", "estimates", "envisages", "potential", "possible", "strategy", "goals", "opportunities", "objectives", or variations thereof or stating that certain actions, events or results "may", "could", "would", "might" or "will" be taken, occur or be achieved, or the negative of any of these terms and similar expressions. Such forward-looking statements herein include statements regarding Mitsubishi Materials acquiring additional common shares of the Company.

Forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause actual events to be materially different from those expressed or implied by such statements. Such factors include but are not limited to the risk of unforeseen challenges in advancing the Casino project, potential impacts on operational continuity, changes in general market conditions that could affect the Company's performance; and other risks and uncertainties disclosed in the Company's annual information form and Form 40-F for the most recently completed financial year and its other publicly filed disclosure documents.

Forward-looking statements are based on assumptions management believes to be reasonable, such assumptions and factors as set out herein, and in the Company's annual information form and Form 40-F for the most recently completed financial year and its other publicly filed disclosure document.

Although the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements, other factors may cause results to be materially different from those anticipated, described, estimated, assessed or intended. These forward-looking statements represent the Company's views as of the date of this news release. There can be no assurance that any forward-looking statements will be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements. The Company does not intend to and does not assume any obligation to update forward-looking statements other than as required by applicable law.

View original content to download multimedia: https://www.prnewswire.com/news-releases/western-copper-and-gold-strengthens-strategic-partnership-with-mitsubishi-materials-302428507.html

SOURCE western copper and gold corporation

View original content to download multimedia: http://www.newswire.ca/en/releases/archive/April2025/15/c9765.html

News Provided by Canada Newswire via QuoteMedia

Keep reading...Show less

Hole ID	X	Y	Z	Azi	Dip	Depth (m)	From (m)	To (m)	Interval (m)	Au (g/t)	Cu (%)	AuEq (g/t)
LDR-25-05	549448	5525296	375	227	-45	214.2	131.7	135.0	3.3	6.6	0.0	6.6
						Including	131.7	134	2.3	9.1	0.0	9.1
LDR-25-06	549560	5525483	375	215	-51	474.0	Pending Assays
LDR-25-07	549453	5525313	375	215	-55	261.0
LDR-25-08	549524	5525441	375	246	-57	516.0
LDR-25-09	549445	5525319	375	238	-54	252.0
LDR-25-10	549489	5525229	375	220	-60	237.0

Hole ID	From	To	Interval	Mineral 1	%	Mineral 2	%	Mineral 3	%	Visible Gold		Total Sulphide (%)
LDR-25-08	89.0	90.0	1.0	Pyrite	2.0					-		2.0
LDR-25-08	166.4	211.1	44.7	Pyrite	0.5					-		0.5
LDR-25-08	211.1	216.0	4.9	Pyrite	0.1					-		0.1
LDR-25-08	216.0	216.6	0.6	Pyrite	1.0					-		1.0
LDR-25-08	216.6	354.8	138.2	Pyrite	0.1					-		0.1
LDR-25-08	360.4	361.3	0.9	Chalcopyrite	0.5	Pyrite	1.0			-		1.5
LDR-25-08	363.9	392.1	28.2	Chalcopyrite	0.3	Pyrite	0.5			-		0.8
LDR-25-08	392.1	397.3	5.3	Pyrite	0.3					-		0.3
LDR-25-08	397.3	405.6	8.3	Chalcopyrite	0.1					-		0.1
LDR-25-08	405.6	406.1	0.5	Chalcopyrite	0.3	Pyrite	30.0			-		30.3
LDR-25-08	406.1	407.9	1.8	Chalcopyrite	0.5	Pyrite	1.5			-		2.0
LDR-25-08	407.9	408.3	0.4	Pyrite	7.0	Chalcopyrite	0.1			-		7.1
LDR-25-08	408.3	409.0	0.7	Pyrite	0.1					-		0.1
LDR-25-08	409.0	409.4	0.4	Pyrite	25.0	Chalcopyrite	25.0			-		50.0
LDR-25-08	409.4	411.7	2.3	Chalcopyrite	3.0	Pyrite	7.0			-		10.0
LDR-25-08	411.7	411.9	0.2	Sphalerite	2.0	Chalcopyrite	0.5	Pyrite	15.0	-		17.5
LDR-25-08	411.9	415.1	3.2	Chalcopyrite	1.0	Pyrite	3.0			-		4.0
LDR-25-08	415.1	420.8	5.8	Chalcopyrite	0.3	Pyrite	1.0			-		1.3
LDR-25-08	420.8	423.3	2.4	Chalcopyrite	1.5	Pyrite	2.5			-		4.0
LDR-25-08	423.3	428.3	5.1	Chalcopyrite	0.1	Pyrite	0.1			-		0.2
LDR-25-08	428.3	455.0	26.7	Pyrite	0.5					-		0.5
LDR-25-08	457.6	458.1	0.4	Sphalerite	0.1	Chalcopyrite	1.0	Pyrite	0.5	-		1.6
LDR-25-08	461.2	461.8	0.6	Chalcopyrite	2.0					-		2.0
LDR-25-08	463.8	464.6	0.9	Chalcopyrite	5.0	Pyrite	2.0			0.1	%	7.1
LDR-25-08	464.6	478.6	14.0	Chalcopyrite	1.0	Pyrite	0.5			-		1.5
LDR-25-08	478.6	479.7	1.1	Chalcopyrite	3.0	Pyrite	8.0			-		11.0
LDR-25-08	480.6	516.0	35.4	Chalcopyrite	0.2	Pyrite	0.1			-		0.3

Deposit	Category	Tonnes (k)	Cu Grade (%)	Au Grade (g/t)	Cu Metal (kt)	Au Metal (koz)	CuEq Grade (%)
Corner Bay (2022)	Indicated	2,700	2.7	0.3	71	22	2.9
Corner Bay (2022)	Inferred	5,900	3.4	0.3	201	51	3.6
Devlin (2022)	Measured	120	2.7	0.3	3	1	2.9
	Indicated	660	2.1	0.2	14	4	2.3
	Measured & Indicated	780	2.2	0.2	17	5	2.4
	Inferred	480	1.8	0.2	9	3	2.0
Joe Mann (2022)	Inferred	610	0.2	6.8	1	133	5.5
Cedar Bay (2018)	Indicated	130	1.6	9.4	2	39	8.9
Cedar Bay (2018)	Inferred	230	2.1	8.3	5	61	8.5
Total	Measured & Indicated	3,600	2.5	0.6	90	66	3.0
Total	Inferred	7,200	3.0	1.1	216	248	3.8

Criteria	JORC Code explanation	Commentary
Sampling techniques	Nature and quality of sampling (eg cut channels, random chips, or specific specialised industry standard measurement tools appropriate to the minerals under investigation, such as down hole gamma sondes, or handheld XRF instruments, etc). These examples should not be taken as limiting the broad meaning of sampling.	All drilling conducted by Cygnus Metals at the Chibougamau Project was completed under the supervision of a registered professional geologist as a Qualified Person (QP) who is responsible and accountable for the planning, execution, and supervision of all exploration activity as well as the implementation of quality assurance programs and reporting. All Cygnus drilling reported is NQ size (47.8 mm diameter).
	Include reference to measures taken to ensure sample representivity and the appropriate calibration of any measurement tools or systems used.	All sample collection, core logging, and specific gravity determinations were completed by Cygnus Metals under the supervision of a professionally qualified registered geologist. NQ core was marked for splitting during logging and is sawn using a diamond core saw with a mounted jig to assure the core is cut lengthwise into equal halves. Half of the cut core is placed in clean individual plastic bags with the appropriate sample tag. QA/QC is done in house by Cygnus Metals geologists with oversight from the Senior Geologist. The check samples (blanks and standards – 4% of total samples with another 2% of core duplicates taken on half split core) that were inserted into the sample batches are verified against their certified values and are deemed a pass if they are within 3 standard deviations of the certified value. The duplicates are evaluated against each other to determine mineralization distribution (nugget). If there are large discrepancies in the check samples, then the entire batch is requested to be re-assayed. The samples are then placed in bags for shipment to the offsite laboratory's facility. The remaining half of the core is retained and incorporated into Cygnus's secure, core library located on the property.
	Aspects of the determination of mineralisation that are Material to the Public Report. In cases where ‘industry standard' work has been done this would be relatively simple (eg ‘reverse circulation drilling was used to obtain 1 m samples from which 3 kg was pulverised to produce a 30 g charge for fire assay'). In other cases more explanation may be required, such as where there is coarse gold that has inherent sampling problems. Unusual commodities or mineralisation types (eg submarine nodules) may warrant disclosure of detailed information.	Industry standard sampling practices were used with sample lengths ranging from 0.3 m to 1.0 m and respected geological contacts. Sample tags were placed at the beginning of each sample interval and the tag numbers were recorded in an MS Excel database. Sampling practice is considered to be appropriate to the geology and style of mineralisation.
Drilling techniques	Drill type (eg core, reverse circulation, open-hole hammer, rotary air blast, auger, Bangka, sonic, etc) and details (eg core diameter, triple or standard tube, depth of diamond tails, face-sampling bit or other type, whether core is oriented and if so, by what method, etc).	Diamond core was drilled using surface diamond rigs with industry recognised contractors Miikan Drilling. Miikan is a joint venture between Chibougamau Diamond Drilling Ltd., the First Nations community of Ouje-Bougoumou and the First Nations community of Mistissini both located in the Eeyou Istchee territory. Drilling was conducted using NQ core size. Directional surveys have been taken at 50m intervals.
Drill sample recovery	Method of recording and assessing core and chip sample recoveries and results assessed. Measures taken to maximise sample recovery and ensure representative nature of the samples. Whether a relationship exists between sample recovery and grade and whether sample bias may have occurred due to preferential loss/gain of fine/coarse material.	Diamond core recovery was measured for each run and calculated as a percentage of the drilled interval. Overall, the core recoveries are excellent in the Chibougamau area. As a result, no bias exists.
Logging	Whether core and chip samples have been geologically and geotechnically logged to a level of detail to support appropriate Mineral Resource estimation, mining studies and metallurgical studies.	All core was geologically and geotechnically logged. Lithology, veining, alteration and mineralisation are recorded in multiple tables of the drillhole database.
	Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc) photography.	Geological logging of core is qualitative and descriptive in nature.
	The total length and percentage of the relevant intersections logged.	100% of the core has been logged.
Sub-sampling techniques and sample preparation	If core, whether cut or sawn and whether quarter, half or all core taken. If non-core, whether riffled, tube sampled, rotary split, etc and whether sampled wet or dry. For all sample types, the nature, quality and appropriateness of the sample preparation technique. Quality control procedures adopted for all sub-sampling stages to maximise representivity of samples. Measures taken to ensure that the sampling is representative of the in-situ material collected, including for instance results for field duplicate/second-half sampling. Whether sample sizes are appropriate to the grain size of the material being sampled.	The NQ diameter the core was sawn in half following a sample cutting line determined by geologists during logging and submitted for analysis on nominal 1m intervals or defined by geological boundaries determined by the logging geologist. Each core sample is assigned a tag with a unique identifying number. Sample lengths are typically one metre but can be depending on zone mineralogy and boundaries. This sampling technique is industry standard and deemed appropriate. Samples sizes are considered appropriate to grain size of the materials being sampled.
Quality of assay data and laboratory tests	The nature, quality and appropriateness of the assaying and laboratory procedures used and whether the technique is considered partial or total.	Sample (NQ size half core) preparation and fire assay analysis were done at Bureau Veritas Commodities Canada Ltd ("BV") in Timmins, Ontario, and ICP-ES multi-elements analysis was done at BV in Vancouver, B.C. Samples were weighed, dried, crushed to 70% passing 2 mm, split to 250 g, and pulverized to 85% passing 75 µm. Samples are fire assayed for gold (Au) (30 g) and multi-acid digestion ICP-ES finish, for 23 elements (including key elements Ag, Cu, Mo). Samples assaying >10.0 g/t Au are re-analysed with a gravimetric finish using a 30 g charge. Samples assaying >10% Cu are re-analysed with a sodium peroxide fusion with ICP-ES analysis using a 0.25 g charge.
	For geophysical tools, spectrometers, handheld XRF instruments, etc, the parameters used in determining the analysis including instrument make and model, reading times, calibrations factors applied and their derivation, etc.	None used.
	Nature of quality control procedures adopted (eg standards, blanks, duplicates, external laboratory checks) and whether acceptable levels of accuracy (i.e. lack of bias) and precision have been established.	At Bureau Veritas, laboratory QC procedures involve the use of internal certified reference material as assay standards, along with blanks, duplicates and replicates.
Verification of sampling and assaying	The verification of significant intersections by either independent or alternative company personnel.	Verification of sampling was made by Cygnus Metals and other professional consultant geologists.
	The use of twinned holes.	No hole is twinned.
	Documentation of primary data, data entry procedures, data verification, data storage (physical and electronic) protocols.	All logging data was completed, core marked up, logging and sampling data was entered directly into the database. The logged data is stored on the site server directly.
	Discuss any adjustment to assay data.	There was no adjustment to the assay data.
Location of data points	Accuracy and quality of surveys used to locate drill holes (collar and down-hole surveys), trenches, mine workings and other locations used in Mineral Resource estimation.	The location of the drillholes and the aiming points for the orientation of the drillholes were indicated on the ground using identified stakes. The stakes marking the location of the drillholes were set up and located with a Garmin GPS model "GPSmap 62s" (4m accuracy). Surveys are collected using a Reflex EZ-Shot® single-shot electronic instrument with readings collected at intervals of approximately every 30 m downhole plus a reading at the bottom of the hole.
	Specification of the grid system used.	The grid system used is UTM NAD83 (Zone 18).
	Quality and adequacy of topographic control.	A Digital Terrane Model (DTM) has been used to accurately plot the vertical position of the holes, which is considered to provide an adequate level of topographic control.
Data spacing and distribution	Data spacing for reporting of Exploration Results.	The drill spacing for recent drilling is considered appropriate for this type of exploration. Due to the historic nature and mix of underground and surface drilling the drill hole spacing for historic drill results is highly variable.
	Whether the data spacing and distribution is sufficient to establish the degree of geological and grade continuity appropriate for the Mineral Resource and Ore Reserve estimation procedure(s) and classifications applied.	No resource estimation is made.
	Whether sample compositing has been applied.	No sample compositing has been applied.
Orientation of data in relation to geological structure	Whether the orientation of sampling achieves unbiased sampling of possible structures and the extent to which this is known, considering the deposit type.	Recent drilling is orientated approximately at right angles to the currently interpreted strike of the known interpreted mineralisation. Due to the historic nature of the drilling the drill hole orientation for historic drill results is highly variable.
Orientation of data in relation to geological structure	If the relationship between the drilling orientation and the orientation of key mineralised structures is considered to have introduced a sampling bias, this should be assessed and reported if material.	No bias is considered to have been introduced by the existing sampling orientation.
Sample security	The measures taken to ensure sample security.	Core was placed in wooden core boxes close to the drill rig by the drilling contractor. The core was collected daily by the drilling contractor and delivered to the secure core logging facility. Access to the core logging facility is limited to Cygnus employees or designates.
Audits or reviews	The results of any audits or reviews of sampling techniques and data.	No audits or reviews of sampling techniques or data have been undertaken, therefore information on audits or reviews is not yet available.

Criteria	JORC Code Explanation	Commentary
Mineral tenement and land tenure status	Type, reference name/number, location and ownership including agreements or material issues with third parties such as joint ventures, partnerships, overriding royalties, native title interests, historical sites, wilderness or national park and environmental settings.	The data reported within this announcement is from the Chibougamau Project. The Chibougamau project consists of 3 properties which include: Copper Rand, 14,383 ha (15 mining concession and 311 exploration claims) Corner Bay – Devlin (1 mining license, 141 exploration claims owned 100% by CBAY and 17 claims owned 56.4% by CBAY/43.6% Pan American Silver) Joe Mann (2 mining concessions, 82 claims owned 100% by CBAY, and 68 claims and 1 mining concession owned 65% by CBAY/35% by SOQUEM) CBAY Minerals Inc. ("CBAY"), a wholly owned subsidiary of Cygnus, is the owner of all claims and leases, except where otherwise noted above. The properties collectively making up the Project are in good standing based on the Ministry of Energy and Natural Resources (Ministère de l'Énergie et des Ressources Naturelles) GESTIM claim management system of the Government of Québec.
Mineral tenement and land tenure status	The security of the tenure held at the time of reporting along with any known impediments to obtaining a licence to operate in the area.	All tenure is in good standing.
Exploration done by other parties	Acknowledgment and appraisal of exploration by other parties.	The Chibougamau Copper and Gold project comprising Corner Bay, Devlin, Cedar Bay and Joe Mann has seen an extensive exploration history dating back to the early 1900s. The Preliminary Economic Assessment (as referred to in the Company's announcement of 15 October 2024) provides a detailed history of the exploration activities undertaken by previous explorers. Corner Bay was first identified as a prospect in 1956 1956 – 1972 eight drilling programs totalling 1,463 m and various geophysical and electromagnetic (EM) surveys 1973 – 1981 Riocanex and Flanagan McAdam: ground geophysical surveys and 43 diamond drill holes 1982 – 1984 Riocanex and Corner Bay Exploration: 38 drill holes and metallurgical test work 1988 – 1991 Corner Bay Exploration: diamond drilling, geophysical surveys and geological characterisation with initial MRE 1992 – 1994 SOQUEM optioned and acquired a 30% interest, and completed diamond drilling 1994 Explorations Cache Inc and Resources MSV Inc: diamond drilling 2004 – 2006 GéoNova and MSV: 98 diamond drill holes and first Technical Report on the Corner Bay project reporting a MRE 2007 – 2009 Campbell: diamond drilling and bulk sample 2012 - 2019 CBAY / AmAuCu: diamond drilling and MRE Devlin identified in 1972 by airborne survey flown by the MERN 1979 – 1981 diamond drilling, geophysical surveys 1981 development commenced Joe Mann identified in 1950 with the commencement of mining activities occurring in 1956 The Joe Mann mine operated underground during three different periods from 1956 to 2007 In July 2012, Resources Jessie acquired the Joe Mann mine property, but conducted only surface exploration work Cedar Bay was discovered prior to 1927 by Chibougamau McKenzie Mines Ltd From initial discovery to 2013 various surface and underground drilling campaigns and geophysical surveys undertaken by various companies Colline was first discovered with mapping and sampling and then drilled in the 1950s with follow up drilling in 1955. In the 1950s a shaft was sunk but the deposit was never mined. The deposit was later tested with three drill holes and six regional drill holes throughout two drilling campaigns in 1984 and 1986/87. Exploration at Colline has been halted historically with the discovery of and focus on other deposits in the region. Golden Eye (previously known as Dore Ramp) was drilled in a few different phases from 1984 to 1992. A total of 47 drill holes from surface are reported during that period A double ramp of approximately 1 kilometre was excavated in 1991-92 to a vertical depth of 160 meters Underground drilling campaign of 46 holes totaling 10,200 meters tested the deposit mainly to a depth of 240 meters (only five holes tested the deposit between 300 and 600 meters)
Geology	Deposit type, geological setting and style of mineralisation.	Corner Bay and Devlin are located at the northeastern extremity of the Abitibi subprovince in the Superior province of the Canadian Shield and are examples of Chibougamau-type copper-gold deposits. The Abitibi subprovince is considered as one of the largest and best-preserved greenstone belts in the world and hosts numerous gold and base metal deposits. The Corner Bay deposit is located on the southern flank of the Doré Lake Complex (DLC). It is hosted by a N 15° trending shear zone more or less continuous with a strong 75° to 85° dip towards the west. The host anorthosite rock is sheared and sericitized over widths of 2 m to 25 m. The deposit is cut by a diabase dyke and is limited to the north by a fault structure and to the south by the LaChib deformation zone. The Corner Bay deposit consists of three main mineralized lodes (subparallel Main Lode 1 and Main Lode 2 above the dyke, and Main Lode below the dyke that make up the bulk of the deposit. The Corner Bay deposit has been traced over a strike length to over 1,100 m to a depth of 1,350 m and remains open at depth. The mineralization is characterized by veins and/or lenses of massive to semi-massive sulphides associated with a brecciated to locally massive quartz-calcite material. The sulphide assemblage is composed of chalcopyrite, pyrite, and pyrrhotite with lesser amounts of molybdenite and sphalerite. Late remobilized quartz-chalcopyrite-pyrite veins occur in a wide halo around the main mineralization zones. Devlin is a flat-lying, copper-rich lodes-hosted deposit in a polygenic igneous breccia that is less than 100 m from the surface. The tabular bodies have been modelled as four nearly horizontal lodes: a more continuous lower zone and three smaller lodes comprising the upper zone. Mineralization is reflected as a fracture zone often composed of two or more sulphide-quartz lodes and stringers. Thickness of the mineralized zones range from 0.5 m to 4.4 m. It has been diluted during modelling to reflect a minimum mining height of 1.8 m. The Joe Mann deposit is characterized by east-west striking shear hosted lodes that extend beyond 1,000 m vertically with mineralization identified over a 3 km strike length. These shear zones form part of the Opawica-Guercheville deformation zone, a major deformation corridor cutting the mafic volcanic rocks of the Obatogamau Formation in the north part of the Caopatina Segment. The gabbro sill hosts the Main Zone and the West Zone at the mine, while the South Zone is found in the rhyolite. These three subvertical E-W (N275°/85°) ductile-brittle shear zones are sub-parallel to stratigraphy and to one another, with up to 140 m to 170 m of separation between them. These shear zones are hosted within a stratigraphic package composed of iron-magnesium (Fe-Mg) carbonate and sericite altered gabbro sills, sheared basalts, and intermediate to felsic tuffs intruded by various felsic intrusions. The Joe Mann gold mineralization is hosted by decimetre scale quartz-carbonate lodes (Dion and Guha 1988). The lodes are mineralized with pyrite, pyrrhotite, and chalcopyrite disposed in lens and lodelets parallel to schistosity, and occasionally visible gold. There are some other minor, mineralized structures, e.g., North and South-South Zones, with limited vertical and horizontal extensions.
Drill hole Information	A summary of all information material to the understanding of the exploration results including a tabulation of the following information for all Material drill holes: easting and northing of the drill hole collar elevation or RL (Reduced Level – elevation above sea level in metres) of the drill hole collar dip and azimuth of the hole down hole length and interception depth hole length. If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly explain why this is the case.	All requisite drillhole information is tabulated elsewhere in this release. Refer Appendices A and B of the body text.
Data aggregation methods	In reporting Exploration Results, weighting averaging techniques, maximum and/or minimum grade truncations (eg cutting of high grades) and cut-off grades are usually Material and should be stated.	For recent results, drill hole intersections are reported above a lower cut-off grade of 2g/t AuEq over widths of greater than 1m.
	Where aggregate intercepts incorporate short lengths of high-grade results and longer lengths of low-grade results, the procedure used for such aggregation should be stated and some typical examples of such aggregations should be shown in detail.	A maximum of 1m internal waste was allowed.
	The assumptions used for any reporting of metal equivalent values should be clearly stated.	Individual grades for the metals included in the metal equivalents calculation for the exploration results are in Appendices A, B and C of this release. Metal equivalents for exploration results have been calculated at a copper price of US$8,750/t, gold price of US$2,350/oz and silver price of US$25/oz. Copper equivalents are calculated based on the formula CuEq(%) = Cu(%) + (Au(g/t) x 0.77258)+(Ag(g/t) x 0.00822). Gold equivalents are calculated based on the formula AuEq(g/t) = Au(g/t) +(Cu(%) x 1.29436)+(Ag(g/t) x 0.01064). Metallurgical recovery factors have been applied to the metal equivalents calculations, with copper metallurgical recovery assumed at 95% and precious metal (gold and silver) metallurgical recovery assumed at 85% based upon historical production at the Chibougamau Processing Facility, and the metallurgical results contained in Cygnus' announcement dated 28 January 2025. It is the Company's view that all elements in the metal equivalent calculations have a reasonable potential to be recovered and sold.
Relationship between mineralisation widths and intercept lengths	These relationships are particularly important in the reporting of Exploration Results. If the geometry of the mineralisation with respect to the drill hole angle is known, its nature should be reported. If it is not known and only the down hole lengths are reported, there should be a clear statement to this effect (eg ‘down hole length, true width not known').	All intersections reported in the body of this release are down hole. For recent drill holes, holes are drilled as close to orthogonal to the plane of the mineralized lodes as possible. True width is estimated to be about 80% of the downhole drill intersection
Diagrams	Appropriate maps and sections (with scales) and tabulations of intercepts should be included for any significant discovery being reported. These should include,but not be limited to a plan view of drill hole collar locations and appropriate sectional views.	Refer Figure 1 (Long Section of Golden Eye) and 2 (Long Section through the Chibougamau North Camp illustrating Golden Eye) in the body of the announcement. Plan view of recent drilling relative to historic drilling and the 1992 ramp access (see Figure 3 below).
Balanced reporting	Where comprehensive reporting of all Exploration Results is not practicable, representative reporting of both low and high grades and/or widths should be practiced to avoid misleading reporting of Exploration Results.	Recent infill drilling at Golden Eye totals 6 holes for 1,954m, with assay results for 1 drill hole received to date. All results greater than 2g/t AuEq over greater than 1m width have been reported.
Other substantive exploration data	Other exploration data, if meaningful and material, should be reported including (but not limited to): geological observations; geophysical survey results; geochemical survey results; bulk samples – size and method of treatment; metallurgical test results; bulk density, groundwater, geotechnical and rock characteristics; potential deleterious or contaminating substances.	There is no other substantive exploration data.
Further work	The nature and scale of planned further work (eg tests for lateral extensions or depth extensions or large-scale step-out drilling). Diagrams clearly highlighting the areas of possible extensions, including the main geological interpretations and future drilling areas, provided this information is not commercially sensitive.	The Company plans to conduct drill testing of additional mineralisation as well as step out drilling of existing lodes to further enhance the resources quoted in this release. More information is presented in the body of this report. Diagrams in the main body of this release show areas of possible resource extension on existing lodes. The Company continues to identify and assess multiple other target areas within the property boundary for additional resources.

Drill Hole (#)	Easting (m)	Northing (m)	Elevation (masl)	Azm	Dip	End Depth (m)
24TK0507	490677.7	5169020.1	388.0	84.1	-61.4	619.5
24TK0536	491111.4	5169076.7	388.0	235.6	-54.2	374.0
24TK0539	491112.0	5169077.1	388.0	227.2	-58.1	370.9
25TK0561	490842.9	5168859.1	388.0	23.0	-64.0	389.2

Drill Hole (#)	From (m)	To (m)	Length	Quick Log	% Sulphides
24TK0536	0	53.64		OB
	53.64	343.35		FGO/MZNO	Traces-4%
	343.35	344.17	0.82	MMS/MSU	80%
	344.17	349.3		SED
	349.3	351.35	2.05	MMS/MSU	20-80%
	351.35	373.99		SED
24TK0539	0	48.16		OB
	48.16	307.32		FGO/MZNO	Traces-10%
	307.32	309.19	1.87	MMS/MSU	70%
	309.19	370.94		SED
25TK0561	0	42.67		OB
	42.67	290		FGO/MZNO	Traces-4%
	290	353.1		CGO	1-5%
	353.1	354.4		SED
	354.4	359.16		CGO	Traces
	359.16	367.63	8.47	MMS/MSU	15-80%
	367.63	371.33	3.7	GAB	10%
	371.33	375.25	3.92	MMS/MSU	65%
	375.25	389.23		SED

Drill Hole (#)	From (m)	To (m)	Length (m)	Assay						NiEq (%)	CuEq (%)
Drill Hole (#)	From (m)	To (m)	Length (m)	Ni (%)	Cu (%)	Co (%)	Pd (g/t)	Pt (g/t)	Au (g/t)	NiEq (%)	CuEq (%)
24TK0507	274.95	292.00	17.05	0.47	0.26	0.02	0.17	0.28	0.13	0.74	1.82
and	382.50	422.59	40.09	0.72	0.51	0.02	0.27	0.48	0.22	1.15	2.90
including	402.00	418.00	16.00	0.96	0.67	0.02	0.41	0.69	0.28	1.50	3.84
and	456.95	457.88	0.93	7.57	4.30	0.06	8.41	22.00	7.10	14.42	39.63
and	485.45	487.40	1.91	1.15	0.87	0.02	0.95	1.53	0.61	2.01	5.20

Grid Battery Metals Files NI 43-101 Technical Report on its Clayton Valley Lithium Project in Nevada

Grid Battery Metals Investor Kit

GET YOUR FREE INVESTOR KIT

Overview

Company Highlights

Key Projects

Texas Spring Project, Nevada

Clayton Valley Project, Nevada

Volt Canyon Project, Nevada

Grid Copper Project

Management Team

Tim Fernback - President and CEO

Robert Guanzon - CFO

Tina Whyte - Corporate Secretary

Solange Khan - Director

Robert Setter - Director

Ali H. Alizadeh – Director

Jeremy Hanson - Geological Advisor

Steven McMillin - Geological Advisor

Latest News

Grid Battery Metals Investor Kit

GET YOUR FREE INVESTOR KIT

Latest Press Releases

Related News

TOP STOCKS