Wisconsin-Based Evology Manufacturing Adopts Digital Sheet Metal Forming Technology from Desktop Metal

Wisconsin-Based Evology Manufacturing Adopts Digital Sheet Metal Forming Technology from Desktop Metal

  • Evology is an ITAR-registered full-service contract manufacturer with 30+ years of experience using traditional and additive manufacturing to serve some of the most innovative product companies in the world
  • The Figur G15 uses patented Digital Sheet Forming (DSF) technology to shape sheet metal on demand directly from a digital file without an expensive stamping press or custom tools, molds, and dies
  • Parts off the Figur G15 can typically be produced within a day or two. After setup, even very large parts have cycle times under one hour
  • Evology purchased a Figur G15 system in Q1 and is now available to serve customers with the rapid production of sheet metal forms for specified gauges of cold rolled steel and 6061 aluminum, with more materials in development
  • Sheet metal parts produced on the Figur G15 will be on display June 25-27 at RAPID + TCT, North America's largest additive manufacturing and industrial 3D printing event, at the Los Angeles Convention Center

Desktop Metal (NYSE: DM),a global leader in Additive Manufacturing 2.0 technologies for mass production, today announced that it has installed four Figur G15 Pro systems featuring Digital Sheet Forming (DSF) technology to three manufacturers, including Evology Manufacturing in Waukesha, Wisconsin.

This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20240515810266/en/

Wisconsin-Based Evology Manufacturing is now offering rapid production of sheet metal parts without stamping dies or tooling after installation of its new Figur G15 Pro, a machine tool from Desktop Metal that uses patent-pending Digital Sheet Forming (DSF) technology. (Photo: Business Wire)

Wisconsin-Based Evology Manufacturing is now offering rapid production of sheet metal parts without stamping dies or tooling after installation of its new Figur G15 Pro, a machine tool from Desktop Metal that uses patent-pending Digital Sheet Forming (DSF) technology. (Photo: Business Wire)

With 30+ years as a contract manufacturer, Evology has a full suite of both traditional and additive technologies to service companies in a wide range of industries, including aerospace, defense, automotive, agricultural, marine, mining, medical, electronics, and consumer goods. Evology serves companies ranging from small startups to Fortune 50 companies with prototyping and low-volume production, typically under 10,000 pieces.

Evology is now offering digital sheet form parts off its Figur G15 for cold rolled steel up to 2 mm thick and 6061 aluminum up to 3.175 mm thick, with more materials in development.

"We are delighted to offer our customers this cutting-edge rapid sheet metal forming technology from Desktop Metal," said Sean Momsen, VP of Business Development and Marketing at Evology. "In addition to our ability to fabricate sheet metal parts rapidly, we also have a full suite of traditional finishing equipment to deliver finished final products to customers."

Justin Nardone, CEO of Figur, a Desktop Metal brand, said, "We are encouraged by the continued demand we see for our rapid sheet metal forming technology, which truly saves manufacturers time and money when it comes to sheet metal production. The G15 eliminates a lot of the work required when forming metal, such as the design and manufacturing of tools and dies. Our system produces designs quickly, accurately, and repeatedly, so manufacturers are able to focus on the craftsmanship of design while getting their products to market faster and more efficiently."

Details about the Figur G15

Introduced in 2022, the Figur G15 is the first commercial platform of its kind to shape sheet metal on demand directly from a digital file. A software-driven proprietary tooling system on an XY gantry forms the sheet with up to 2,000 lbs of force in a highly engineered and proprietary build zone.

With a maximum sheet size of 1,600 x 1,200 mm (63.0 x 47.2 in), the Figur G15 delivers parts with a draw depth up to 400 mm (16 in) in Z without custom forming tools, molds, dies, or presses. The G15 supports forming a range of metals and sheet thicknesses – including steel up to 2.0 mm and aluminum up to 2.5 mm – and delivers a high quality surface finish

Pro configurations of the Figur G15 include an automatic tool changer and measurement, through tool part lubrication, and automated work holding capabilities.

Learn more at teamdm.com/FigurG15

About Desktop Metal

Desktop Metal (NYSE:DM) is driving Additive Manufacturing 2.0, a new era of on-demand, digital mass production of industrial, medical, and consumer products. Our innovative 3D printers, materials, and software deliver the speed, cost, and part quality required for this transformation. We're the original inventors and world leaders of the 3D printing methods we believe will empower this shift, binder jetting and digital light processing. Today, our systems print metal, polymer, sand and other ceramics, as well as foam and recycled wood. Manufacturers use our technology worldwide to save time and money, reduce waste, increase flexibility, and produce designs that solve the world's toughest problems and enable once-impossible innovations. Learn more about Desktop Metal and our #TeamDM brands at www.desktopmetal.com .

Forward-looking Statements

This press release contains certain forward-looking statements within the meaning of the federal securities laws, including statements about Desktop Metal's strategic integration and cost savings initiatives, expected restructuring charges, anticipated cost savings, long-term growth, market share, liquidity and profitability, are forward-looking statements. Forward-looking statements generally are identified by the words "believe," "project," "expect," "anticipate," "estimate," "intend," "strategy," "future," "opportunity," "plan," "may," "should," "will," "would," "will be," "will continue," "will likely result," and similar expressions. Forward-looking statements are predictions, projections and other statements about future events that are based on current expectations and assumptions and, as a result, are subject to risks and uncertainties. Many factors could cause actual future events to differ materially from the forward-looking statements in this document, including but not limited to, the risks and uncertainties set forth in Desktop Metal, Inc.'s filings with the U.S. Securities and Exchange Commission. There is no guarantee Desktop Metal will achieve the cost savings it expects. These filings identify and address other important risks and uncertainties that could cause actual events and results to differ materially from those contained in the forward-looking statements. Forward-looking statements speak only as of the date they are made. Readers are cautioned not to put undue reliance on forward-looking statements, and Desktop Metal, Inc. assumes no obligation and does not intend to update or revise these forward-looking statements, whether as a result of new information, future events, or otherwise.

Investor Relations:
(857) 504-1084
DesktopMetalIR@icrinc.com

Media Relations:
Sarah Webster
(313) 715-6988
sarahwebster@desktopmetal.com

News Provided by Business Wire via QuoteMedia

DM
The Conversation (0)
Green Technology Metals Logo

Optimised Root Lithium Project PEA Highlights Robust Economics

Following the release of the December 2023 PEA1 , and in response to lithium market dynamics, the Root Lithium Project has now been optimised within a new PEA which has strengthened the project economics.

Green Technology Metals Limited (ASX: GT1) (GT1 or the Company), a Canadian-focused multi-asset lithium business, is pleased to announce the completion of its optimised Preliminary Economic Assessment (PEA) for the standalone Root Lithium Project. The updated PEA outlines a robust development pathway for the Root Project, featuring a combination of open pit mine and underground mining methods. The processing flowsheet features a hybrid Dense Media Separation (DMS) and Flotation concentrator designed to produce 5.5% Spodumene Concentrate.

Keep reading...Show less
Black Canyon (ASX:BCA)

Metallurgical Testwork Delivers 48% to 50% Manganese Concentrates

Australian manganese explorer and developer, Black Canyon Limited (Black Canyon or the Company) (ASX: BCA) is pleased to announce the results from benchtop scale beneficiation testwork completed on composite reverse circulation (RC) drill chip samples from the W2 prospect at the Wandanya Project1. The testwork demonstrates substantial uplifts from composite feed grades of 21.2% Mn and 41.5% Mn to concentrate grades well above the premium 44% Mn oxide benchmark grade for both the moderate and higher-grade feed samples. The laboratory testwork used HLS techniques as a proxy for widely used, industry based dense media separation (DMS).

Keep reading...Show less
Brunswick Exploration Reports Phase 1 Metallurgical Results at Mirage with Potential for DMS-Only Flowsheet

Brunswick Exploration Reports Phase 1 Metallurgical Results at Mirage with Potential for DMS-Only Flowsheet

Brunswick Exploration Inc. ( TSX-V: BRW OTCQB: BRWXF ; FRANKFURT:1XQ; ; " BRW " or the " Company ") is pleased to report preliminary, Phase 1, metallurgical results from test work on drill core samples from the Mirage Project. The test was conducted by SGS Canada Inc. in Lakefield, Ontario and comprised of heavy liquid separation ("HLS") testing, and dense media separation ("DMS") testing. The program was completed on a representative mineralized dyke comprising of material from MR-6, MR-3, MR-4 and a single dyke in the stacked dyke area.

Highlights include:

News Provided by GlobeNewswire via QuoteMedia

Keep reading...Show less
Osisko Metals Releases 2024 Pine Point Mineral Resource Estimate: 49.5Mt of Indicated Mineral Resources Grading 5.52% ZnEq and 8.3Mt of Inferred Mineral Resources Grading 5.64% ZnEq

Osisko Metals Releases 2024 Pine Point Mineral Resource Estimate: 49.5Mt of Indicated Mineral Resources Grading 5.52% ZnEq and 8.3Mt of Inferred Mineral Resources Grading 5.64% ZnEq

Osisko Metals Incorporated (the " Company " or " Osisko Metals ") ( TSX-V: OM ; OTCQX: OMZNF ; FRANKFURT: 0B51 ) is pleased to announce the 2024 Mineral Resource Estimate Update (" 2024 MRE ") for the Pine Point Project ("Pine Point" or "the Project"), located near Hay River, in the Northwest Territories of Canada. The 2024 MRE was prepared by BBA Inc. ("BBA") and PLR Resources Inc. and will form the resource base for a Feasibility Study ("FS") that is planned to officially start in Q3 2024. Cut-off grades are based on estimated long-term metal prices, mining costs, metal recoveries, concentrate transport, and smelter costs. The definition drill program supporting the 2024 MRE was executed between 2018 and 2024.

News Provided by GlobeNewswire via QuoteMedia

Keep reading...Show less

Latest Press Releases

Related News

×