ACME Lithium Provides Drilling Update at Clayton Valley Nevada Lithium Brine Project: Successfully Completes DH-1 at 1400 Feet

ACME Lithium Provides Drilling Update at Clayton Valley Nevada Lithium Brine Project: Successfully Completes DH-1 at 1400 Feet

ACME Lithium Inc. (CSE: ACME) (OTCQB: ACLHF) (the "Company", or "ACME") is pleased to report that the Company has successfully completed hole DH-1 at the Clayton Valley lithium brine project to a total depth of 1400 feet or 427 meters below ground surface.

Prospective basin sediments have been encountered and delineated as highly probable for aquifer units based on permeability features, lithology and color. The core is consistent with the known basin stratigraphy. Most notably, an upper volcanic ash unit was encountered from 181 feet to 195 feet which is consistent with the depth and composition of the Main Ash Unit (MAU) in Clayton Valley. Multiple permeability features consisting of coarse sands and gravels, and sand and gravel with weak clay matrix were encountered from approximately 479 feet to 1400 feet TD. From the logged core, these permeability features increased in frequency and in depth below the silt and clay dominated stratigraphy higher in the hole above 479 feet. A second ash layer or lacustrine tuff was encountered from 1,180 to 1,250 feet which also exhibits characteristics of a potential lithium bearing aquifer deeper in the depositional sequence in Clayton Valley.

Cemented surface casing was set to a depth of 200 feet and perforated three-inch PVC casing was installed from 200 feet to TD. The perforations allow formation fluids to flow thru the casing. Downhole logs and geophysical surveys were completed for hole deviation, natural gamma, fluid conductivity and temperature. The downhole geophysical surveys confirm the stratification of denser fluids at depth. Natural gamma, fluid conductivity, and temperature logs all indicate possible brine inflow zones starting around 850 feet with electrical conductivity and total dissolved solids increasing with depth to 1400 feet TD.

Fluids in the wellbore will be developed out of the hole via airlift to remove potential drilling contaminants. The well will be allowed to recover and equilibrate after the airlift development. Upon completion of well development activities, individual passive composite zone samples will be collected using HydraSleeve™ and Snap Sampler™ technology. Sample zones will target stratigraphic features expected to contain brine. These samples will be sent to an independent lab and analyzed for lithium, boron and other minerals typical of lithium enriched brine systems.

It is expected that the fluids in the casing will stratify by density, so the resulting data will indicate if potentially economic lithium brines are present. If so, the geologic and geophysical data will help identify specific horizons to be tested in a Phase 1B drill program which will include a separate, larger diameter well for completion of brine aquifer permeability testing and sampling. Phase 1B is expected to be executed during the 3rd and 4th quarter of 2022.

ACME's Clayton Valley Nevada lithium brine project is contiguous to the northwest of Albermarle's Silverpeak lithium deposit which has been in production since 1966. Harris Drilling Exploration and Associates Inc. has been contracted by ACME's operator, GeoXplor Corp., to provide drilling services and related activities.

ACME's project location adjacent to or nearby lithium brine projects does not guarantee exploration success or that mineral resources or reserves will be defined on ACME's properties. Exploration, development, and activities conducted by regional companies provide assistance and additional data for exploration work being completed by ACME.

William Feyerabend, Certified Professional Geologist is a qualified person as defined by NI 43-101 and has supervised the preparation of the scientific and technical information that forms the basis for this news release.

About ACME Lithium Inc.

Led by an experienced team, ACME Lithium is a mineral exploration Company focused on acquiring, exploring and developing battery metal projects in partnership with leading technology and commodity companies. ACME has acquired or is under option to acquire a 100-per-cent interest in projects located in Clayton Valley and Fish Lake Valley, Esmeralda County Nevada, and at Cat-Euclid and Shatford Lakes in southeastern Manitoba.

On behalf of the Board of Directors

Steve Hanson
Chief Executive Officer, President and Director
Telephone: (604) 564-9045
info@acmelithium.com

Neither the CSE nor its regulations service providers accept responsibility for the adequacy or accuracy of this news release. This news release may contain forward-looking information within the meaning of applicable securities laws ("forward-looking statements"). Forward-looking statements are statements that are not historical facts and are generally, but not always, identified by the words "expects," "plans," "anticipates," "believes," "intends," "estimates," "projects," "potential" and similar expressions, or that events or conditions "will," "would," "may," "could" or "should" occur and in this news release include but are not limited to the attributes of, timing for and expected benefits to be derived from exploration, drilling or development at ACME's project properties. Information inferred from the interpretation of drilling, sampling and other technical results may also be deemed to be forward-looking statements, as it constitutes a prediction of what might be found to be present when and if a project is actually developed. These forward-looking statements are subject to a variety of risks and uncertainties which could cause actual events or results to differ materially from those reflected in the forward-looking statements, including, without limitation: risks related to fluctuations in metal prices; uncertainties related to raising sufficient financing to fund the planned work in a timely manner and on acceptable terms; changes in planned work resulting from weather, logistical, technical or other factors; the possibility that results of work will not fulfill expectations and realize the perceived potential of the Company's properties; risk of accidents, equipment breakdowns and labour disputes or other unanticipated difficulties or interruptions; the possibility of cost overruns or unanticipated expenses in the work program; the risk of environmental contamination or damage resulting from the Company's operations and other risks and uncertainties. Any forward-looking statement speaks only as of the date it is made and, except as may be required by applicable securities laws, the Company disclaims any intent or obligation to update any forward-looking statement, whether as a result of new information, future events or results or otherwise.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/128553

News Provided by Newsfile via QuoteMedia

ACME:CC
The Conversation (0)
ACME Lithium (CSE:ACME)

ACME Lithium


Keep reading...Show less

North American Lithium Development with Key Projects in Nevada, Manitoba and Saskatchewan

ACME Lithium Starts Exploration Program at Bailey Lake Pegmatite Discovery Area in Saskatchewan Canada

ACME Lithium Starts Exploration Program at Bailey Lake Pegmatite Discovery Area in Saskatchewan Canada

ACME Lithium Inc. (CSE: ACME) (OTCQX: ACLHF) (the "Company", or "ACME") is pleased to announce that it has commenced a summer exploration program at its Bailey Lake pegmatite discovery area in northeastern Saskatchewan.

Starting August 21st, 2023, ACME will be conducting a 3-in-1 Airborne Geophysical Survey on the Bailey Lake Property which will include Helicopter-borne Tri-axial Gradiometer Magnetics, Radiometrics, and LiDAR (Light Detection and Ranging) to identify regional structural trends and localized controls of pegmatite bodies and other key information to aid in future drill targeting.

News Provided by Newsfile via QuoteMedia

Keep reading...Show less
ACME Lithium Successfully Completes 10-Day Pumping Test at Clayton Valley Lithium Brine Project

ACME Lithium Successfully Completes 10-Day Pumping Test at Clayton Valley Lithium Brine Project

ACME Lithium Inc. (CSE: ACME) (OTCQX: ACLHF) (the "Company", or "ACME") is pleased to report that the Company has successfully completed a 10-day pumping test at test well TW-1 located in Clayton Valley, Nevada. The data generated during the test will be used to estimate the transmissivity and the storativity of the Lower Gravel Unit (LGU) at the TW-1 location. Preliminary Phase 1 and Phase 2 data suggest the perforated casing of TW-1 captures approximately 500 feet of potential lithium brine aquifer hosted in the LGU. The LGU is the basal gravel overlaying bedrock in Clayton Valley.

Cannot view this image? Visit: https://images.newsfilecorp.com/files/7776/177491_a3fcc31ed4de6886_002.jpg

Figure 1: Lithium Brine Samples, Clayton Valley Nevada

News Provided by Newsfile via QuoteMedia

Keep reading...Show less
ACME Lithium Clarifies Technical Report Disclosure

ACME Lithium Clarifies Technical Report Disclosure

ACME Lithium Inc. (CSE: ACME) (OTCQX: ACLHF) (the "Company", or "ACME"). As a result of a review by the British Columbia Securities Commission, the Company is issuing the following news release to clarify its disclosure. By news release dated June 19, 2023, the Company announced it had filed a technical report titled "NI 43-101 Technical Report Update on the Fish Lake Valley Lithium Claystone Property, Esmeralda County, Nevada USA" (the "Technical Report"). Both the news release and the Technical Report stated that the author of the report, William Feyerabend, was an independent consultant.

Mr. Feyerabend is and was as of the date of the Technical Report, a paid consultant of the Company acting in the role of VP Exploration in the United States. As such, Mr. Feyerabend was not independent of the Company and the report should not have stated as such.

News Provided by Newsfile via QuoteMedia

Keep reading...Show less
ACME Lithium Commences TW-1 Pumping Test at Clayton Valley Nevada Lithium Brine Project

ACME Lithium Commences TW-1 Pumping Test at Clayton Valley Nevada Lithium Brine Project

ACME Lithium Inc. (CSE: ACME) (OTCQX: ACLHF) (the "Company", or "ACME") is pleased to report that the Company has commenced pumping test activities at test well TW-1 at its Clayton Valley Nevada lithium brine project. The well is the only permitted deep well known to currently exist in the northern portion of Clayton Valley.

Data generated from the pumping test will be used to assess hydraulic properties, brine chemistry of the Lower Gravel Unit (LGU) aquifer and to examine the potential concentration and extractability of economic lithium brine in the LGU.

News Provided by Newsfile via QuoteMedia

Keep reading...Show less
ACME Lithium Announces Results from Phase 1 Winter Drilling Program at Shatford Lake Manitoba

ACME Lithium Announces Results from Phase 1 Winter Drilling Program at Shatford Lake Manitoba

ACME Lithium Inc. (CSE: ACME) (OTCQX: ACLHF) (the "Company", or "ACME") announced today drill core sample results from its 2023 winter drill program at its 100% owned Shatford Lake and Birse Lake lithium projects in southeastern Manitoba, Canada. ACME's Shatford-Birse claim area are contiguous to the south of Sinomine's world-class Tanco Mine, a Lithium, Cesium and Tantalum producer (LCTs) since 1969.

Core drilling was based on geological prospecting/mapping with lithium determinations by LIBS and geophysical magnetic interpretation. Drilling and magnetic interpretation was successful in defining broad structural belts with multiple unexposed pegmatites and specific cross structural features in these broad belts that control pegmatite injection. Recent results from this maiden drilling program at Shatford Lake will help the Company vector in the fertile pegmatite zones. Twenty-six pegmatites were intersected in 6 of 8 drill holes.

News Provided by Newsfile via QuoteMedia

Keep reading...Show less
SAGA Metals Expands Radar Ti-V-Fe Project Vision with Preliminary Metallurgical Insights and Major Exploration Milestones

SAGA Metals Expands Radar Ti-V-Fe Project Vision with Preliminary Metallurgical Insights and Major Exploration Milestones

Saga Metals Corp. ("SAGA" or the "Company") (TSXV: SAGA,OTC:SAGMF) (OTCQB: SAGMF) (FSE: 20H) a North American exploration company focused on critical mineral discovery, is pleased to report dual advancements in its 2025 program: the completion of a detailed mineralogical and geological study prepared by Dr. Al Miller, that sets the stage for comprehensive metallurgical testing, and significant on-site exploration progress at the 100% owned Radar Titanium-Vanadium-Iron (Ti-V-Fe) Project near Cartwright, Labrador. Together, these developments underscore Radar's potential as a strategic critical metals project in North America.

Radar Ti-V-Fe Project in Labrador, Canada:

News Provided by GlobeNewswire via QuoteMedia

Keep reading...Show less
Altech Batteries Ltd  Annual Report to Shareholders

Altech Batteries Ltd Annual Report to Shareholders

Perth, Australia (ABN Newswire) - Altech Batteries Ltd (ASX:ATC,OTC:ALTHF) (FRA:A3Y) (OTCMKTS:ALTHF) is a specialty battery technology company that has a joint venture agreement with world leading German battery institute Fraunhofer IKTS ("IKTS") to commercialise the revolutionary CERENERGY Sodium Chloride Solid State (SCSS) Battery. CERENERGY batteries are the game-changing alternative to lithium-ion batteries. CERENERGY batteries are fire and explosion-proof; have a life span of more than 15 years and operate in extreme cold and desert climates. The battery technology uses table salt and is lithium-free; cobalt-free; graphite-free; and copper-free, eliminating exposure to critical metal price rises and supply chain concerns.

The joint venture is commercialising its CERENERGY battery, with plans to construct a 120MWh production facility on Altech's land in Saxony, Germany. The facility intends to produce CERENERGY battery modules to provide grid storage solutions to the market.

Altech has executed sales offtake Letters of Intent with three companies that covers the full first five years of production from the 120MWh production facility. Altech is now forging forward with securing the finance to construct the production facility, envisaged to be a combination of debt, equity from the sale of a minority interest in the project, and grants and subsidies.

The CERENERGY battery has achieved the highest possible dark green rating from Standard & Poors, due to its non-reliance on critical minerals as well as its expected 50% less greenhouse gas emissions to lithium-ion battery technology.

Altech has licenced its proprietary high purity alumina coating technology to 75% owned subsidiary Altech Industries Germany GmbH (AIG), which has finalised a Definitive Feasibility Study for the development of a 8,000tpa silicon/graphite alumina coating plant in the state of Saxony, Germany to supply its Silumina Anodes product to the burgeoning European electric vehicle market.

The Company patented its game changing technology of incorporating high-capacity silicon into lithium-ion batteries. Through in house R&D, the Company has cracked the "silicon code" and successfully achieved a 55% higher energy battery with improved cyclability or battery life. Higher density batteries result in smaller, lighter batteries and substantially less greenhouse gases, and is the future for the EV market. The Company's proprietary silicon graphite product is registered as Silumina Anodes.

The Company is in the race to get its patented technology to market, has finalised the construction of a Silumina Anodes pilot plant at AIG's industrial site within the Schwarze Pumpe Industrial Park in Saxony, Germany. The European silicon feedstock supply partner for this plant will be Ferroglobe. The project has also received green accreditation from the independent Norwegian Centre of International Climate and Environmental Research (CICERO). The pilot plant adjacent to the proposed project site will allow the qualification process for its Silumina Anodes product. AIG has executed NDAs with German and American automakers as well as a European based battery company.

The pilot plant to produce commercial samples of the product has now been completed and is operational. Altech is working to ramp up production of the pilot plant in order to provide the commercial samples to the prospective companies for their independent testing within their product range.

*To view the full Annual Report, please visit:
https://abnnewswire.net/lnk/35XEX5O2



About Altech Batteries Ltd:

Altech Batteries Limited (ASX:ATC,OTC:ALTHF) (FRA:A3Y) is a specialty battery technology company that has a joint venture agreement with world leading German battery institute Fraunhofer IKTS ("Fraunhofer") to commercialise the revolutionary CERENERGY(R) Sodium Alumina Solid State (SAS) Battery. CERENERGY(R) batteries are the game-changing alternative to lithium-ion batteries. CERENERGY(R) batteries are fire and explosion-proof; have a life span of more than 15 years and operate in extreme cold and desert climates. The battery technology uses table salt and is lithium-free; cobalt-free; graphite-free; and copper-free, eliminating exposure to critical metal price rises and supply chain concerns.

The joint venture is commercialising its CERENERGY(R) battery, with plans to construct a 100MWh production facility on Altech's land in Saxony, Germany. The facility intends to produce CERENERGY(R) battery modules to provide grid storage solutions to the market.

News Provided by ABN Newswire via QuoteMedia

Keep reading...Show less
A.I.S. Resources Signs Earn-In Agreement with Riversgold on the New Copper/Gold/Antimony Discovery at Saint John, New Brunswick

A.I.S. Resources Signs Earn-In Agreement with Riversgold on the New Copper/Gold/Antimony Discovery at Saint John, New Brunswick

A.I.S. Resources Limited (TSXV: AIS,OTC:AISSF, OTC-Pink: AISSF) ("AIS" or the "Company") is pleased to announce that it has entered into an earn-in agreement with Riversgold Ltd. (ASX: RGL) ("Riversgold"), granting AIS the right to acquire up to a 75% interest in the new Saint John IOCGPorphyry Project located in New Brunswick, Canada.

AIS CEO Marc Enright-Morin commented, "We are excited to partner with Riversgold on this very exciting newly discovered Saint John Project. The combination of very high-grade mineralisation, excellent infrastructure, and district-scale potential provides AIS with a unique opportunity to advance a possible IOCG/porphyry system in one of Canada's most mining-friendly jurisdictions. Saint John is exploration and drill ready with two drill programs already approved. Its unique location near the coast means we can explore here in a meaningful way all year round and we look forward to getting the drills turning and come up with the discovery hole."

News Provided by GlobeNewswire via QuoteMedia

Keep reading...Show less

Latest Press Releases

Related News

×