Q2 Metals Reports Multiple Wide, Mineralized Intercepts at the Cisco Lithium Project, Including 272.5 Metres at 1.61% Li20

Highlights:

  • Three (3) drill holes from the 2025 drill program with strong analytical results are reported herein:
    • CS25-036: nine (9) separate intervals, the widest being 272.5 m at 1.61% Li 2 O.
  • CS25-038: 17 separate intervals, the widest being 66.5 m at 1.55% Li 2 O and
    58.9 m at 1.09% Li 2 O .

    • CS25-039: 12 separate intervals, including:

      • 108.5 m at 1.62% Li 2 O ,
      • 71.0 m at 1.84% Li 2 O,
      • 77.7 m at 1.48% Li 2 O, and
      • 107.4 m at 1.87% Li 2 O
  • Three (3) drill rigs continue to operate on the Cisco Project, with a fourth scheduled to start at the end of October 2025.
  • The upcoming drilling programs will be primarily focused on infill-scale drilling within the main mineralized zone, supporting the Company's efforts to deliver an initial inferred Mineral Resource Estimate in the first half of 2026.

Q2 Metals Corp. (TSX.V: QTWO | OTCQB: QUEXF | FSE: 458) (" Q2 " or the " Company ") is pleased to report assay results from the ongoing 2025 drill program (the " 2025 Drill Program ") at the Company's Cisco Lithium Project (the " Project " or the " Cisco Project "), located within the greater Nemaska traditional territory of the Eeyou Istchee James Bay region of Quebec, Canada.

" Hole 36, with its 272.5 metres of continuous spodumene pegmatite grading 1.61% Li 2 O is a significant confirmation of the substantial width of the Mineralized Zone, especially when considered alongside intervals such as the 347 metres of continuous spodumene pegmatite in Hole 21," said Neil McCallum, Vice President of Exploration for Q2 Metals. "Importantly, the Mineralized Zone remains open at depth and along strike, indicating strong potential for further expansion. Our geology team has designed a robust drilling program for the upcoming drilling program as we continue to define the extent of the Mineralized Zone and advance toward an inferred Mineral Resource estimate."

The analytical results reported herein represent the first three (3) drill holes completed during the summer 2025 drill campaign.

As previously reported (see news release of June 10, 2025 ), hole CS25-036 was paused prior to the start of this year's goose-hunting season break and ended before the intended completion depth. Several wide pegmatite intervals were intercepted, and assays were reported on the first 302 metres ("m") of drilling completed during the winter 2025 drill campaign. The entirety of the assays on drill hole CS25-036 are now reported herein. The analytical results continue to confirm the robust width of the mineralized zone at this location.

Drill holes CS25-038 and 039 confirmed the mineralization at the southern portion of the mineralized zone with many intervals reporting greater than 1.5% Li2O. Drilling at the Cisco Project is ongoing, with three (3) drill rigs currently operating on site. A fourth drill rig has been mobilized to site and is scheduled to start at the end of October 2025, further accelerating the pace of the exploration program.

The primary focus of the fall and winter drilling campaign with be on infill-scale drilling within the main mineralized zone. The work is designed to support the Company's objective of delivering an initial inferred Mineral Resource Estimate in the first half of 2026.

Pegmatite intervals and analytical results from the current program will be reported as they are received and reviewed.

Map of Recent Drill Holes with Analytical Results at Cisco Property

Figure 1. Map of Recent Drill Holes with Analytical Results at Cisco Property

Cross-Section E, Hole-36 in relation to the Exploration Target

Figure 2. Cross-Section E, Hole-36 in relation to the Exploration Target

Summary of Analytical Results of Drill Holes CS25-036, 038 and 039 at Cisco Project

Table 1. Summary of Analytical Results of Drill Holes CS25-036, 038 and 039 at Cisco Project

All intervals of greater than 2 m of core-length and greater than 0.30% Li2O are included in Table 1. Internal dilution of non-pegmatite material was limited to intervals of less than 5 m. No specific grade cap or lower cut-offs were used during grade and width calculations. All intervals are reported as core widths and mineralized intervals in all the holes drilled thus far are not representative of the true width as the modelled pegmatite zones are being refined with every additional hole.

Drill Hole Collar Information

The summary of drill holes CS25-036, CS25-038 and CS-25-039, including basic location and dip/azimuth, is detailed below (Table 2).

Summary of Drill Hole Collar Information, Cisco Project (CS25-036, CS25-038 and CS-25- 039)

Table 2. Summary of Drill Hole Collar Information, Cisco Project (CS25-036, CS25-038 and CS-25- 039)

Sampling, Analytical Methods and QA/QC Protocols

All drilling was conducted using diamond drill rig with NQ sized core and all drill core samples are shipped to SGS Canada's preparation facility in Val D'Or, Quebec, for standard sample preparation (code PRP92) which includes drying at 105°C, crushing to 90% passing 2 mm, riffle split 500 g, and pulverize 85% passing 75 microns. The pulps are then shipped by air to SGS Canada's laboratory in Burnaby, BC, where the samples are homogenized and subsequently analyzed for multi-element (including Li and Ta) using sodium peroxide fusion with ICP-AES/MS finish (code GE_ICM91A50). The reported Li grade will be multiplied by the standard conversion factor of 2.153 which results in an equivalent Li 2 O grade. Drill core was saw-cut with half-core sent for geochemical analysis and half-core remaining in the box for reference. The same side of the core was sampled to maintain representativeness.

A Quality Assurance / Quality Control (QA/QC) protocol following industry best practices was incorporated into the sampling program. Measures include the systematic insertion of quartz blanks and certified reference materials (CRMs) into sample batches at a rate of approximately 5% each. Additionally, analysis of pulp-split and reject-split duplicates was completed to assess analytical precision. The QP has verified the QA/QC results of the analytical work.

Qualified Person

Neil McCallum, B.Sc., P.Geol, is a Qualified Person as defined by NI 43-101, and a registered permit holder with the Ordre des Géologues du Québec and member in good standing with the Professional Geoscientists of Ontario. Mr. McCallum has reviewed and approved the technical information in this news release. Mr. McCallum is a director and the Vice President Exploration for Q2.

Upcoming Events

Q2 is attending the following conferences and events:

Investissement Quebec
Critical and Strategic Minerals Trade Mission
South Korea & Japan September 29 – October 3, 2025
The Hidden Gems Conference New York, NY October 20 – 21, 2025
IMARC Sydney, Australia October 21 – 23, 2025
XPLOR Montreal QC October 27 – 30, 2025

ABOUT Q2 Metals Corp.

Q2 Metals is a Canadian mineral exploration company focused on the Cisco Lithium Project located within the greater Nemaska traditional territory of the Eeyou Istchee, James Bay, Quebec, Canada.

Cisco is comprised of 801 claims, totaling 41,253 hectares, with the main mineralized zone just 6.5 km from the Billy Diamond Highway, which transects the Project and leads to the Town of Matagami, rail head of the Canadian National Railway, approximately 150 km to the south.

The Cisco Project has district-scale potential with an initial Exploration Target estimating a range of potential lithium mineralization of 215 to 329 million tonnes at a grade ranging from 1.0 to 1.38% Li 2 O, based only on the first 40 holes drilled. An Exploration Target is used to provide a conceptual estimate of the potential quantity and grade of a mineral deposit, based on known and additional limited geological evidence. It is an early-stage assessment that will help to guide further exploration, but it is not a mineral resource or mineral reserve and should not be treated as such.

Drill testing continues with mineralization open at depth and along strike with potential for expansion at the Cisco Mineralized Zone. The 2025 Exploration Program is ongoing, with rolling assay results anticipated in the coming weeks and months as the Company works towards an initial mineral resource estimate.

FOR FURTHER INFORMATION, PLEASE CONTACT:

Alicia Milne Jason McBride Chris Ackerman
President & CEO Investor Relations Manager Corporate Development
Alicia@Q2metals.com Jason@Q2metals.com Chris@Q2metals.com
Telephone:  1 (800) 482-7560
E-mail: info@Q2metals.com
www.Q2Metals.com

Social Media:
Follow the Company: Twitter , LinkedIn , Facebook , and Instagram

Forward-Looking Statements

This news release contains forward-looking statements and forward-looking information (collectively, "forward-looking statements") within the meaning of applicable Canadian legislation. Forward-looking statements are typically identified by words such as: "believes", "expects", "anticipates", "intends", "estimates", "plans", "may", "should", "would", "will", "potential", "scheduled" or variations of such words and phrases and similar expressions, which, by their nature, refer to future events or results that may, could, would, might or will occur or be taken or achieved. Accordingly, all statements in this news release that are not purely historical are forward-looking statements and include statements regarding beliefs, plans, expectations and orientations regarding the future including, without limitation, any statements or plans regard the geological prospects of the Company's properties and the future exploration endeavors of the Company. Although the Company believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance and actual results or developments may differ materially from those in the forward-looking statements. Forward-looking statements are based on a number of material factors and assumptions.

Forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause actual results to differ materially from those anticipated in such forward-looking statements. The forward-looking statements in this news release speak only as of the date of this news release or as of the date specified in such statement. Forward looking statements in this news release include, but are not limited to, drilling results on the Cisco Project and inferences made therefrom, the conceptual nature of an exploration target on the Cisco Project, the potential scale of the Cisco Project, the focus of the Company's current and future exploration and drill programs, the scale, scope and location of future exploration and drilling activities, the Company's expectations in connection with the projects and exploration programs being met, the Company's objectives, goals or future plans, statements, exploration results, potential mineralization, the estimation of mineral resources, exploration and mine development plans, timing of the commencement of operations and estimates of market conditions. Factors that could cause actual results to differ materially from those in forward-looking statements include failure to obtain necessary approvals, variations in ore grade or recovery rates, changes in project parameters as plans continue to be refined, unsuccessful exploration results, changes in project parameters as plans continue to be refined, results of future resource estimates, future metal prices, availability of capital and financing on acceptable terms, reallocation of proposed use of funds, general economic, market or business conditions, risks associated with regulatory changes, defects in title, availability of personnel, materials and equipment on a timely basis, accidents or equipment breakdowns, uninsured risks, delays in receiving government approvals, unanticipated environmental impacts on operations and costs to remedy same. Readers are cautioned that mineral exploration and development of mines is an inherently risky business and accordingly, the actual events may differ materially from those projected in the forward-looking statements. Additional risk factors are discussed in the section entitled "Risk Factors" in the Company's Management Discussion and Analysis for its recently completed fiscal period, which is available under Company's SEDAR profile at www.sedarplus.com .

Should one or more of these risks or uncertainties materialize, or should assumptions underlying the forward-looking statements prove incorrect, actual results may vary materially from those described herein as intended, planned, anticipated, believed, estimated or expected. Although the Company has attempted to identify important risks, uncertainties and factors which could cause actual results to differ materially, there may be others that cause results not to be as anticipated, estimated or intended. The Company does not intend, and does not assume any obligation, to update this forward-looking information except as otherwise required by applicable law.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Photos accompanying this announcement are available at

https://www.globenewswire.com/NewsRoom/AttachmentNg/4331261e-cebb-4c67-9893-dbaaff9ac7d6

https://www.globenewswire.com/NewsRoom/AttachmentNg/3e4062bc-2cab-4b93-b874-008b2ac2b849

https://www.globenewswire.com/NewsRoom/AttachmentNg/e86ce834-9182-4102-b1e2-5bb67207ffe4

https://www.globenewswire.com/NewsRoom/AttachmentNg/7996190c-019b-4b46-81f9-74cb18b9498d


Primary Logo

News Provided by GlobeNewswire via QuoteMedia

QTWO:CC
The Conversation (0)
Altech Batteries Ltd  Commences Selling Sodium Nickel Chloride Batteries

Altech Batteries Ltd Commences Selling Sodium Nickel Chloride Batteries

Perth, Australia (ABN Newswire) - Altech Batteries Limited (ASX:ATC,OTC:ALTHF) (FRA:A3Y) (OTCMKTS:ALTHF) pleased to announce its immediate entry into the sodium nickel chloride (SNC) (or previously referred as sodium alumina solid state (SAS)), battery market in Australia, Europe and United States of America through a strategic collaboration and distribution agreement with the current largest SNC battery manufacturer AMPower, a subsidiary of the Chilwee Group.

Highlights

- Altech signs collaboration agreement with AMPower for early market entry into Europe, Australia and the USA

- AMPower presently produces conventional zebra design sodium nickel chloride batteries for Uninterrupted Power Supply (UPS) and are developing BESS and traction batteries

- Altech's CERENERGY(R) batteries use the same sodium nickel chloride chemistry, but are especially designed for high performance energy storage systems (ESS)

- Altech and AMPower will cooperate on sodium nickel BESS development. Each partner will have the authority to distribute the co-developed BESS under its own brand

- AMPower will manufacture energy storage packs in accordance with Altech specifications and supervision under Altech branding and distribution

- Altech gains immediate market entry and presence for sodium nickel chloride batteries to establish its energy storage battery market especially in Europe and Australia

- CERENERGY(R) cell technology I/P will not be shared with AMPower

- Altech's CERENERGY(R) 120 MWh battery project development in Germany remains on track

- Preliminary funding approval from the German Government for 46.7 million Euro having been received

Chilwee is the third largest e-mobility battery manufacturer in China, with an annual turnover of US$20 billion, 23,000 employees, and production capabilities spanning lead-acid, lithium-ion, sodium-ion, and next-generation battery technologies. AMPower currently manufactures conventional Zebra-type sodium nickel chloride (Na/NiCl2) solid-state batteries-using the same chemistry as CERENERGY(R)-but mainly for the small Uninterrupted Power Supply (UPS) industrial market. AMPower was originally established as a joint venture with General Electric to produce sodium nickel chloride UPS batteries under the Durathon brand.

In the initial phase, AMPower will produce sodium nickel chloride solid state UPS batteries for Altech which will be under Altech brand, supervision and specification for distribution across Australia, Europe, and the USA. This strategy provides a faster pathway to cash flow for Altech.

This will strengthen the market presence and branding of Altech while the company advances and secures funding for its CERENERGY(R) 120 MWh energy storage project in Germany.

Several battery models that will be offered by Altech immediately are shown above. These sodium nickel chloride UPS batteries are completely fireproof, featured long cycle life, and operate reliably in both extreme heat and cold. A key advantage of these sodium nickel chloride UPS batteries is their capacity to stay fully charged, idle, and instantly ready for discharge for more than 10 years-without the need for regular maintenance or the frequent replacements required by leadacid, lithium-ion or Ni-Cad batteries. These UPS batteries also serve a unique niche in explosion-proof environments or locations where lithium-ion batteries are restricted or banned. To capture this market, Altech has recruited a team of experienced marketing professionals to drive the sales process.

ESS Batteries

In the second phase, AMPower, with its available production capacity, intends to manufacture sodium nickel chloride batteries for the household, industrial, and grid-scale energy storage markets.

AMPower currently has a production capacity of approximately 100 MWh per annum, with the ability to scale up to 200 MWh per annum. Altech and AMPower will cooperate on small and medium size sodium nickel BESS development. Each partner will have the authority to distribute the codeveloped BESS under its own brand. AMPower will produce sodium nickel chloride BESS for Altech, under Altech brand and sales managed by Altech in the three key markets Europe, Australia and the USA. This arrangement will generate additional cash flow over and above the UPS sales, while building product credibility and brand recognition, paving the way for the CERENERGY(R) 120 MWh large scale industrial energy storage project in Germany.

This collaboration fast-tracks the commercialisation of Altech's sodium nickel chloride (Na/NiCl2) solid-state battery technology, enabling immediate production of Altech-branded battery packs to meet growing customer demand, reinforced by strong interest from existing offtake partners. Crucially, the arrangement excludes any transfer or sharing of Altech's proprietary IKTS CERENERGY(R) battery cell technology with AMPower, ensuring complete protection of Altech's intellectual property. And vice versa, AMPower will not transfer or share AMPowers Durathon(R) battery cell technology with Altech, ensuring complete protection of the intellectual property of GE and Chilwee.

Under the agreement, AMPower will manufacture the battery cells, integrate the battery management and thermal systems, and assemble the grid-ready battery packs. AMPower will also provide customers with the required warranties and performance guarantees for the grid systems. Altech will define the technical specifications and operational modes tailored to a range of energy storage and BESS applications, while overseeing production, branding, regional certifications, marketing, and distribution across Europe, the United States, and Australia. All products produced by AMPower on requirements of Altech will be marketed under the Altech brand and interface, and will comply with international battery standards. This collaboration positions Altech to fast-track its entry into the grid battery market and establish an immediate commercial presence across its key regions.

BENEFITS FOR AMPOWER

AMPower's current facility is operating at an annual production rate of approximately 100 MWh, primarily supplying the small-scale UPS commercial market with 20-30 kWh battery units. The company has the ability to scale production to 200 MWh per annum with minimal additional capital investment. By supplying Altech's grid-scale battery packs, AMPower will be able to substantially increase its individual cell production volumes, unlocking greater economies of scale and reducing overall unit costs. Altech will provide the sales expansion needed to drive this market entry and support the ramp-up of AMPower's operations.

BENEFITS FOR ALTECH

Altech's new go-to-market strategy is designed to accelerate commercial progress and operational readiness while delivering early financial returns. By launching UPS and grid-scale battery packs ahead of commissioning its CERENERGY(R) plant in Germany, Altech will establish a steady revenue stream to offset operational costs and reduce reliance on external funding during the transition to full-scale production. Early market entry enables Altech to build a customer base across key regions-including Australia, Europe, and the United States-while strengthening brand recognition and market credibility.

This first-mover advantage also mitigates risks from competing battery technologies, as Altech's sodium nickel chloride (Na/NiCl2) batteries gain real-world application experience ahead of rivals.

The collaboration further provides Altech with direct exposure to battery production and systems integration, offering hands-on experience in areas such as BESS assembly, energy management systems, and system thermal control. These practical insights will support the refinement and optimisation of Altech's CERENERGY(R) battery packs.

SAME CHEMISTRY - ORIGINAL TECHNOLOGY

ZEBRA cells originally designed in the early 90s employ the same sodium nickel chloride (Na/NiCl) cell chemistry that forms the basis of Altech's CERENERGY(R) technology, however with an entirely different geometry and use profile. This proven chemistry is inherently non-flammable, highly tolerant of extreme temperatures, and delivers long cycle life with stable performance. ZEBRA batteries are particularly well suited for UPS systems and smaller energy storage applications.

CERENERGY(R) represents the next generation of sodium nickel chloride technology, featuring an advanced tubular design that enhances thermal management, improves electrochemical efficiency, and delivers higher energy density beside simplifying the manufacturing process whilst increasing quality, reliability and performance. Its simplified architecture reduces inactive material, substantially lowers system costs, and increases reliability-making it a scalable and robust solution for grid - scale stationary energy storage. Notably, the new cell design delivers a 2.6-fold increase in capacity, rising from 38 Ah to 100 Ah, marking a significant leap in performance. In addition CERENERGY(R) feature a number of other improvements in terms of material composition, electrode design and composition, which are part of the confidential IP and shall not be publicised.

Importantly, the cooperation with AMPower ZEBRA UPS batteries followed by small and medium size energy storage systems with the branding of Altech helps build market acceptance of sodium nickel chloride technology while fully complementing, rather than competing with, the development of the CERENERGY(R) grid scale battery storage production project in Germany.

Altech Group Managing Director Iggy Tan said:

"Altech is experiencing exceptional interest in our sodium nickel chloride solid-state battery technology, especially from customers seeking safer, more reliable alternatives to lithium-ion. These batteries are inherently fireproof, perform reliably in extreme temperatures, and offer strong environmental credentials - making them an ideal fit for the needs of the stationary energy storage market. Growing concerns over battery fire risks, particularly in data centres and AI facilities, are further accelerating demand. Our collaboration with AMPower enables immediate production, and our offtake customers are eager to secure supply. With special focus on UPS as well as small and medium size energy storage this early market entry strategy is augmenting and not competing with the large scale grid energy storage Cerenergy Battery strategy. By moving quickly to meet this demand, Altech is positioning itself as a leader in what we see as the next major wave in battery storage innovation."

To view details of the Agreement, please visit:
https://abnnewswire.net/lnk/PEUQAPMZ



About Altech Batteries Ltd:

Altech Batteries Limited (ASX:ATC,OTC:ALTHF) (FRA:A3Y) is a specialty battery technology company that has a joint venture agreement with world leading German battery institute Fraunhofer IKTS ("Fraunhofer") to commercialise the revolutionary CERENERGY(R) Sodium Alumina Solid State (SAS) Battery. CERENERGY(R) batteries are the game-changing alternative to lithium-ion batteries. CERENERGY(R) batteries are fire and explosion-proof; have a life span of more than 15 years and operate in extreme cold and desert climates. The battery technology uses table salt and is lithium-free; cobalt-free; graphite-free; and copper-free, eliminating exposure to critical metal price rises and supply chain concerns.

The joint venture is commercialising its CERENERGY(R) battery, with plans to construct a 100MWh production facility on Altech's land in Saxony, Germany. The facility intends to produce CERENERGY(R) battery modules to provide grid storage solutions to the market.

News Provided by ABN Newswire via QuoteMedia

Keep reading...Show less
SAGA Metals Announces Non-Brokered Private Placement

SAGA Metals Announces Non-Brokered Private Placement

NOT FOR DISTRIBUTION TO U.S. NEWS WIRE SERVICES OR FOR DISSMINATION IN THE UNITED STATES.

Saga Metals Corp. ("SAGA" or the "Company") (TSXV: SAGA,OTC:SAGMF) (OTCQB: SAGMF) (FSE: 20H), a North American exploration company focused on critical minerals, is pleased to announce that it intends to complete a financing by way of a non-brokered private placement for aggregate gross proceeds of up to C$2,988,000 (collectively, the " Offering ") comprised of: (i) 7,100,000 flow-through common share units of the Company (the " FT Units ") at C$0.28 per FT Unit for gross proceeds of C$1,988,000, and, (ii) 4,000,000 hard dollar common share units of the Company (the " HD Units ", and together with the FT Units, the " Securities ") at C$0.25 per HD Unit for gross proceeds of C$1,000,000.

News Provided by GlobeNewswire via QuoteMedia

Keep reading...Show less
Altech - Commences Selling Sodium Nickel Chloride Batteries

Altech - Commences Selling Sodium Nickel Chloride Batteries

Altech Batteries (ATC:AU) has announced Altech - Commences Selling Sodium Nickel Chloride Batteries

Download the PDF here.

Precious, Base & Critical Minerals in Carheil Graphite Zones

Precious, Base & Critical Minerals in Carheil Graphite Zones

Metals Australia (MLS:AU) has announced Precious, Base & Critical Minerals in Carheil Graphite Zones

Download the PDF here.

Latest Press Releases

Related News