E3 Lithium Begins Commissioning the Clearwater Project Demonstration Facility

E3 Lithium Begins Commissioning the Clearwater Project Demonstration Facility

E3 Lithium Ltd. (TSXV: ETL,OTC:EEMMF) (FSE: OW3) (OTCQX: EEMMF), "E3", "E3 Lithium" or the "Company," a leader in Canadian lithium, announces that commissioning of Phase 1 of the Demonstration Facility is underway and on schedule. Phase 1 involves operating the 30-column DLE system (the "DLE System") and polishing and purification equipment (the "Purification Units"). As previously stated, the objective of Phase 1 is to fully operationalize the DLE System and Purification Units to produce a high-quality lithium chloride, which will support the production of battery-grade lithium carbonate.

This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20250902700528/en/

Demonstration Facility as of August 24, 2025

Demonstration Facility as of August 24, 2025

Final testing and operational reviews were completed late last week; the first stage of commissioning is the introduction of brine into the DLE system, which occurred over the past weekend. The company expects the initial DLE System to take approximately one week to full commission. After which, the Purification Units will be initialized and lithium chloride produced from the DLE System will flow through this system, completing the commissioning stages of Phase 1. Once both the DLE System and Purification Units have completed their respective commissioning stages, the Demonstration Facility will shift to full operations. The main goals of Phase 1 are to ensure the equipment is in operating order after assembly, confirm both systems functionality under real-time operating conditions and produce a high-quality lithium chloride for conversion into battery-grade lithium carbonate.

E3 Lithium has sufficient brine on site to enable the operation of the Phase 1 DLE and purification units into early Q4, 2025, and the Company expects to provide updates as operations progress and results become available.

"The commissioning of Phase 1 of our Demonstration Facility highlights the equipment is in full working order and is an exciting next step for the advancement of this facility," said Chris Doornbos, President and CEO. "The results from Phase 1 will ensure that our process is fully optimized and ready for Phase 2 of the Demonstration Facility that is set to begin later this fall."

ON BEHALF OF THE BOARD OF DIRECTORS

Chris Doornbos, President, CEO & Chair
E3 Lithium Ltd.

About E3 Lithium

E3 Lithium is a development company with a total of 21.2 million tonnes of lithium carbonate equivalent (LCE) Measured and Indicated 1 as well as 0.3 Mt LCE Inferred mineral resources 2 in Alberta and 2.5 Mt LCE Inferred mineral resources 3 in Saskatchewan. The Clearwater Pre-Feasibility Study outlined a 1.13 Mt LCE proven and probable mineral reserve with a pre-tax NPV(8%) of USD 5.2 Billion with a 29.2% IRR and an after-tax NPV(8%) of USD 3.7 Billion with a 24.6% IRR 1 .

1: The Clearwater Project NI 43-101 Pre-Feasibility Study, effective June 20, 2024, is available on the E3 Lithium's website ( www.e3lithium.ca/technical-reports/ ) and SEDAR+ ( www.sedarplus.ca ).

2: The mineral resource NI 43-101 Technical Report for the Garrington District Lithium Resource Estimate, effective June 25, 2025, identified 5.0 Mt LCE (measured and indicated) and 0.3 Mt LCE (inferred) and will be available on the E3 Lithium's website ( www.e3lithium.ca/technical-reports/ ) and SEDAR+ ( www.sedarplus.ca ) within 45 days of this news release.

3: The mineral resource NI 43-101 Technical Report for the Estevan Lithium District, effective May 23, 2024, identified 2.5 Mt LCE (inferred) and is available on the E3 Lithium's website ( www.e3lithium.ca/technical-reports/ ) and SEDAR+ ( www.sedarplus.ca ).

Unless otherwise indicated, Kevin Carroll, P. Eng., Chief Development Officer and a Qualified Person under National Instrument 43-101, has reviewed and is responsible for the technical information contained on this news release.

Forward-Looking and Cautionary Statements

This news release includes certain forward-looking statements as well as management's objectives, strategies, beliefs and intentions or forward-looking information within the meaning of applicable securities laws. Forward-looking statements are frequently identified by such words as "believe", "may", "will", "plan", "expect", "anticipate", "estimate", "intend", "project", "potential", "possible" and similar words referring to future events and results. Forward-looking statements are based on the current opinions, expectations, estimates and assumptions of management in light of its experience, perception of historical trends, and results of the PFS, but such statements are not guarantees of future performance. In particular, this news release contains forward-looking information relating to: the expected timelines for the assembly, testing and commissioning of the demonstration equipment; production, pretreatment, purification, volume reduction and conversion process and features and the expected outcomes thereof; the Company's expectations regarding the production of lithium carbonate; plans and objectives of management for the Company's operations of the Demonstration Facility; and the inherent hazards associated with mineral exploration and mining operations. In preparing the forward-looking information in this news release, the Company has applied several material assumptions, including, but not limited to, that any additional financing needed will be available on reasonable terms; the exchange rates for the U.S. and Canadian currencies will be consistent with the Company's expectations; that the current exploration, development, environmental and other objectives concerning the Demonstration Facility can be achieved and that its other corporate activities will proceed as expected; that general business and economic conditions will not change in a materially adverse manner and that all necessary governmental approvals for the planned activities on the Demonstration Facility will be obtained in a timely manner and on acceptable terms.

All forward-looking information (including future-orientated financial information) is inherently uncertain and subject to a variety of assumptions, risks and uncertainties, including the speculative nature of mineral exploration and development, fluctuating commodity prices, the effectiveness and feasibility of emerging lithium extraction technologies which have not yet been tested or proven on a commercial scale or on the Company's brine, risks related to the availability of financing on commercially reasonable terms and the expected use of proceeds; operations and contractual obligations; changes in estimated mineral reserves or mineral resources; future prices of lithium and other metals; availability of third party contractors; availability of equipment; failure of equipment to operate as anticipated; accidents, effects of weather and other natural phenomena and other risks associated with the mineral exploration industry; the Company's lack of operating revenues; currency fluctuations; risks related to dependence on key personnel; estimates used in financial statements proving to be incorrect; competitive risks and the availability of financing, as described in more detail in our recent securities filings available under the Company's profile on SEDAR+ ( www.sedarplus.ca ) . Actual events or results may differ materially from those projected in the forward-looking statements and we caution against placing undue reliance thereon. We assume no obligation to revise or update these forward-looking statements except as required by applicable law.

E3 Lithium - Investor Relations
Rob Knowles
investor@e3lithium.ca
587-324-2775

E3 Lithium - Media Inquiries
Kati Dolyniuk
External Relations
communications@e3lithium.ca
587-324-2775

News Provided by Business Wire via QuoteMedia

ETL:CA
The Conversation (0)
E3 Lithium Outlines 23.4 Mt LCE Inferred Mineral Resource in Consolidated Bashaw District

E3 Lithium Outlines 23.4 Mt LCE Inferred Mineral Resource in Consolidated Bashaw District

E3 Lithium (TSXV: ETL) (FSE: OU7A) (OTCQX: EEMMF) (the "Company" or "E3 Lithium" or "E3"), Alberta's leading lithium developer and Direct Lithium Extraction (DLE) technology innovator today announced the increase in its inferred mineral resource to 23.4 million tonnes of lithium carbonate equivalent (LCE) contained within the newly-named Bashaw District (the "Resource"). The Bashaw District combines and expands the Clearwater Resource and Exshaw Resource areas into a consolidated resource that contains an estimated total of 59 billion m 3 (59 km 3 ) of brine formation water at an average grade of 74.5 milligramLitre (mgL) lithium (Figure 1).

"This increase clearly establishes E3 Lithium, and the Leduc Aquifer in this region, as being a globally-significant source of lithium," commented Chris Doornbos , E3's CEO.  "With the combination of the Resource, and the Company's ion-exchange direct extraction technology, E3 continues to lead Alberta on the path to becoming a major lithium producing jurisdiction.  With E3's significant resource, established social licence to operate, supportive government policy, low-risk and transparent regulatory processes, and stable tax and royalty systems, E3 is well-situated to realize commercial production of battery-grade lithium."

News Provided by Canada Newswire via QuoteMedia

Keep reading...Show less
Altech Batteries Ltd  CERENERGY Battery Prototype Reaches Key Milestones

Altech Batteries Ltd CERENERGY Battery Prototype Reaches Key Milestones

Perth, Australia (ABN Newswire) - Altech Batteries Limited (ASX:ATC,OTC:ALTHF) (FRA:A3Y) (OTCMKTS:ALTHF) is pleased to announce the latest performance results of the CERENERGY(R) cell and battery pack prototypes. These results confirm the technological maturity and robustness of the CERENERGY(R) technology and mark another decisive step towards industrialisation.

Highlights

- 650+ cycles with no capacity loss, proving exceptional material stability and long operational lifespan compared to conventional batteries

- Near 100% Coulombic efficiency, confirming minimal side reactions and strong intrinsic safety of sodium nickel chloride chemistry

- High energy efficiency of up to 92%, surpassing typical 70-80% levels of competing battery technologies

- Proven safety under extreme conditions - cells remained stable during overcharge, deep discharge, and thermal cycling up to 300 degC with no gassing, leakage, or rupture

- Robust and reliable chemistry - sodium nickel chloride avoids flammable electrolytes and runaway risks, confirming suitability for safe, large-scale grid and renewable energy storage

- ABS60 prototype validated under real-world conditions -tested across diverse load profiles, high-current pulses up to 50 A, and thermal variations

- Stable, efficient performance - achieved ~88% round-trip efficiency with no observable capacity fade over 110+ cycles

CELL PERFORMANCE

The CERENERGY(R) prototype cells have successfully completed over 650 charge-discharge cycles without any detectable capacity loss. Cycle life is a critical measure of battery durability, as most conventional batteries experience gradual degradation with every cycle. Achieving such performance highlights the outstanding stability of the materials and points to the potential for a long operational lifespan.

For stationary energy storage systems (ESS), this translates into fewer battery replacements, lower lifetime operating costs, and greater reliability for end users.

The cells also delivered nearly 100% Coulombic efficiency alongside an energy efficiency of up to 92% across 650 cycles. Coulombic efficiency reflects the proportion of charge recovered during discharge relative to what was supplied during charging. A value approaching 100% indicates minimal side reactions or parasitic losses, confirming the intrinsic stability and safety of sodium nickel chloride chemistry. This high efficiency demonstrates that the cells are not expending energy on unwanted processes such as electrode degradation. Such performance is vital for scalability, ensuring reliable, longterm operation in commercial energy storage applications.

Energy efficiency represents the proportion of energy delivered relative to the energy supplied. Competing technologies, including conventional high-temperature batteries and many flow batteries, typically achieve only around 70-80%. By reaching 92%, CERENERGY(R) positions itself in a highly competitive class, offering more cost-effective energy storage, stronger economics for grid operators, and seamless compatibility with the requirements of renewable energy integration.

The cells achieved a nominal capacity of 100 Ah and 250 Wh, with reliable performance even at higher discharge rates. A key feature is their ability to support multiple daily charge-discharge cycles within the 20-80% state of charge (SoC) range at 25 A. This capability positions CERENERGY(R) as a highly flexible solution for grid operators and energy storage providers, enabling cost-efficient, long-life performance in applications that demand frequent cycling such as renewable integration, peak shaving, and backup power.

CERENERGY(R) prototype cells underwent rigorous abuse testing, including overcharge to 4 V, deep discharge to 0.2 V, and thermal cycling between room temperature and 300 degC. In all cases, the cells remained stable with no gassing, leakage, or rupture -clear proof of their outstanding safety. These results highlight the intrinsic stability of sodium nickel chloride chemistry, which avoids the flammable electrolytes and runaway risks common in lithium-ion batteries. The ability to withstand extreme electrical and thermal stress demonstrates CERENERGY(R)'s robustness and confirms its suitability for safe, largescale deployment in grid, renewable, and industrial energy storage applications. This was achieved over 3 cycles with 1.8 Full Charge Equivalent (FCE) into 22 hours.

BATTERY PACK ABS60 (60 kWh) PROTOTYPE

The first ABS60 battery pack prototype has been successfully validated under real-world operating conditions, marking a major step forward in product readiness. Testing included diverse load profiles,

continuous discharges at 25 A (equivalent to C-rate of C/4 (discharges in 4 hours), or one-quarter of the pack's rated capacity per hour) at 80% depth of discharge (DoD), short-duration high-current pulses up to 50 A, and carefully controlled thermal variations.

The pack consistently demonstrated stable performance, achieving ~88% round-trip efficiency while maintaining reliable thermal management. Efficiency refers to the proportion of input energy that can be retrieved during operation-a critical measure of economic viability for large-scale storage. Over more than 110 cycles, results showed no observable capacity fading and only a slight increase in internal resistance. Capacity fading refers to the gradual decline in usable energy over repeated cycles, while internal resistance influences power delivery and heat generation.

The absence of meaningful degradation confirms the durability and electrochemical stability of the ABS60 design. These outcomes are highly significant as they demonstrate that the pack can withstand real-world duty cycles while retaining performance and efficiency, translating into longer service life, fewer replacements, and lower total cost of ownership.

For grid operators and renewable integration projects, this combination of robust cycling capability, efficiency, and thermal stability underscores the ABS60's commercial readiness and competitive advantage in the stationary energy storage market.

These results are a strong confirmation of CERENERGY(R)'s technological leadership and a clear signal of the technology's competitiveness and robustness for future applications in energy storage and industrial markets.

Group Managing Director, Iggy Tan said "These results confirm CERENERGY(R)'s robustness and readiness for market adoption. Demonstrating long cycle life, high efficiency, and unmatched safety, we are now strongly positioned to deliver a competitive and sustainable alternative for grid and industrial energy storage."

*To view photographs, tables and figures, please visit:
https://abnnewswire.net/lnk/17QS44T3



About Altech Batteries Ltd:

Altech Batteries Limited (ASX:ATC,OTC:ALTHF) (FRA:A3Y) is a specialty battery technology company that has a joint venture agreement with world leading German battery institute Fraunhofer IKTS ("Fraunhofer") to commercialise the revolutionary CERENERGY(R) Sodium Alumina Solid State (SAS) Battery. CERENERGY(R) batteries are the game-changing alternative to lithium-ion batteries. CERENERGY(R) batteries are fire and explosion-proof; have a life span of more than 15 years and operate in extreme cold and desert climates. The battery technology uses table salt and is lithium-free; cobalt-free; graphite-free; and copper-free, eliminating exposure to critical metal price rises and supply chain concerns.

The joint venture is commercialising its CERENERGY(R) battery, with plans to construct a 100MWh production facility on Altech's land in Saxony, Germany. The facility intends to produce CERENERGY(R) battery modules to provide grid storage solutions to the market.

News Provided by ABN Newswire via QuoteMedia

Keep reading...Show less
Battery Anode Material Refinery - Design & Location Update

Battery Anode Material Refinery - Design & Location Update

Metals Australia (MLS:AU) has announced Battery Anode Material Refinery - Design & Location Update

Download the PDF here.

IR1:IR1 Completes Acquisition to Consolidate Black Hills, US

IR1:IR1 Completes Acquisition to Consolidate Black Hills, US

Rapid Critical Metals (RLL:AU) has announced IR1:IR1 Completes Acquisition to Consolidate Black Hills, US

Download the PDF here.

Critical Minerals Market Expected to Reach $586 Billion by 2032 as Demand Grows for Supply of Essential Minerals

Critical Minerals Market Expected to Reach $586 Billion by 2032 as Demand Grows for Supply of Essential Minerals

FN Media Group News Commentary - Industry experts project that the global critical minerals market will continue maintaining substantial growth as it has in recent years. The global critical minerals market is experiencing unprecedented growth, primarily driven by the accelerating transition to clean energy technologies. According to the International Energy Agency (IEA), the market size of key energy transition minerals doubled over the past five years, aligning closely with the market size for iron ore mining. This surge is largely attributed to the tripling of lithium demand, a 70% increase in cobalt demand, and a 40% rise in nickel demand between 2017 and 2022, with clean energy applications accounting for significant portions of this demand. The sustainability of the global critical minerals market is increasingly influenced by governmental initiatives aimed at reducing environmental impact and enhancing resource efficiency. A recent report from DataM Intelligence projected that Critical Minerals Market Size reached US$ 328.19 billion in 2024 and is expected to reach US$ 586.63 billion by 2032, growing with a CAGR of 7.53% during the forecast period 2025-2032. The report said: "A notable trend in the critical minerals market is the increasing investment in mineral development, which witnessed a 30% rise in 2022 following a 20% increase in 2021. Lithium saw the sharpest investment increase at 50%, followed by copper and nickel. This investment surge is a response to the soaring demand for minerals like lithium, cobalt, nickel, and copper, driven by the deployment of clean energy technologies such as electric vehicles, wind turbines, and solar panels." Active companies in the markets this week include: Saga Metals Corp. (OTCQB: SAGMF) (TSX-V: SAGA), TMC the metals company Inc. (NASDAQ: TMC), Critical Metals Corp. (NASDAQ: CRML), Rio Tinto Group (NYSE: RIO), Empire Metals Limited (OTCQX: EPMLF) (LON: EEE).

News Provided by GlobeNewswire via QuoteMedia

Keep reading...Show less

Latest Press Releases

Related News

×